write a c++ code for a voice control car in Arduino. With the components of a Arduino uno , motor sheild, bluetooth module , dc motor , two servo motors and 9 volt battery
Answers
The Arduino Uno serves as the main controller for the voice-controlled car project. The motor shield allows the Arduino to control the DC motor responsible for the car's forward and backward movement. The servo motors, connected to the Arduino, enable the car to turn left or right. The Bluetooth module establishes a wireless connection between the car and a mobile device. The 9V battery provides power to the Arduino and the motor shield.
An example C++ code for a voice-controlled car using Arduino Uno, a motor shield, a Bluetooth module, a DC motor, two servo motors, and a 9V battery:
#include <AFMotor.h> // Motor shield library
#include <SoftwareSerial.h> // Bluetooth module library
AF_DCMotor motor(1); // DC motor object
Servo servo1; // Servo motor 1 object
Servo servo2; // Servo motor 2 object
SoftwareSerial bluetooth(10, 11); // RX, TX pins for Bluetooth module
void setup() {
bluetooth.begin(9600); // Bluetooth module baud rate
servo1.attach(9); // Servo motor 1 pin
servo2.attach(8); // Servo motor 2 pin
}
void loop() {
if (bluetooth.available()) {
char command = bluetooth.read(); // Read the incoming command from the Bluetooth module
// Perform corresponding action based on the received command
switch (command) {
case 'F': // Move forward
motor.setSpeed(255); // Set motor speed
motor.run(FORWARD); // Run motor forward
break;
case 'B': // Move backward
motor.setSpeed(255);
motor.run(BACKWARD);
break;
case 'L': // Turn left
servo1.write(0); // Rotate servo1 to 0 degrees
servo2.write(180); // Rotate servo2 to 180 degrees
delay(500); // Delay for servo movement
break;
case 'R': // Turn right
servo1.write(180);
servo2.write(0);
delay(500);
break;
case 'S': // Stop
motor.setSpeed(0);
motor.run(RELEASE);
break;
}
}
}
In this code, the AFMotor library is used to control the DC motor connected to the motor shield. The SoftwareSerial library is used to communicate with the Bluetooth module. The servo motors are controlled using the Servo library.
To learn more about Bluetooth: https://brainly.com/question/28778467
#SPJ11
Related Questions
Which options allow users to modify the existing data in a report?
Report or Create
Create or Design View
Design view or Layout view
Print Preview or Report
Answers
Answer:
the answer is print preview
Explanation:
because i just tried both answers givin they were both wrong
algorithm and flowchart and c program to display sum of 5 different number
Answers
The algorithm and flow chart and c program to sum of 5 different number is given below.
Describe C programming?C is a compiled language, which means that programs written in C must be compiled before they can be run. This compilation process produces machine code, which is the code that can be executed by a computer. Because of this, C programs can be very fast and efficient.
One of the strengths of C is its ability to work with memory directly through pointers. Pointers are variables that store memory addresses, allowing the programmer to manipulate the data at that address. This can be useful in low-level programming tasks, such as working with hardware or writing device drivers.
Here's the algorithm to display the sum of 5 different numbers:
Declare a variable sum and initialize it to zero.Prompt the user to enter the first number and store it in a variable.Add the value of the first number to the sum variable.Repeat steps 2-3 for the second, third, fourth, and fifth numbers.Output the value of the sum variable.Here's the flowchart for the same:
Start
↓
Initialize sum = 0
↓
Prompt user for first number
↓
Add first number to sum
↓
Prompt user for second number
↓
Add second number to sum
↓
Prompt user for third number
↓
Add third number to sum
↓
Prompt user for fourth number
↓
Add fourth number to sum
↓
Prompt user for fifth number
↓
Add fifth number to sum
↓
Output sum
↓
End
Here's the C program to display the sum of 5 different numbers:
#include <stdio.h>
int main() {
int num1, num2, num3, num4, num5, sum;
printf("Enter the first number: ");
scanf("%d", &num1);
printf("Enter the second number: ");
scanf("%d", &num2);
printf("Enter the third number: ");
scanf("%d", &num3);
printf("Enter the fourth number: ");
scanf("%d", &num4);
printf("Enter the fifth number: ");
scanf("%d", &num5);
sum = num1 + num2 + num3 + num4 + num5;
printf("The sum of the numbers is %d\n", sum);
return 0;
}
This program prompts the user to enter 5 different numbers, stores them in variables, calculates their sum, and outputs the result.
To know more about sum visit:
https://brainly.com/question/13437666
#SPJ9
The ____ command displays pages from the online help manual for information on Linux commands and their options.
Answers
The correct answer is Reference material is available on subjects like instructions, subroutines, and files using the man command.
One-line explanations of instructions identified by name are provided by the man command. Additionally, the man command offers details on any commands whose descriptions include a list of user-specified keywords. The abbreviation "man" stands for manual page. Man is an interface to browse the system reference manual in unix-like operating systems like Linux. A user can ask for a man page to be displayed by simply entering man, a space, and then argument. The argument in this case might be a command, utility, or function. The Windows equivalent of man is HELP. For illustration: C:\> HELP Type HELP command-name to get more information about a particular command. ASSOC displays or changes associations for file extensions.
To learn more about man command click the link below:
brainly.com/question/13601285
#SPJ4
How many worksheets display in the Excel window when you create a new blank workbook?
(I'm genuinely confused on if it's 1, or 3.)
A. 3
B. 1
C. 2
D. 4
Answers
In Excel, when you create a new blank workbook, there is only one worksheet displayed. If you need more, you'd have to create them yourself. (Option B)
what is excel worksheet?A worksheet (sometimes known as a spreadsheet) is made up of cells into which data may be entered and calculated. Columns and rows are used to order the cells. A workbook always has a worksheet. A workbook may contain several worksheeks. Consider it a book.
To find the worksheet, go to the Home tab, Cells group, Insert, and then Insert Sheet. Tip: You may also right-click the sheet tabs you want to insert and select Insert. Click Worksheet on the General tab, and then OK.
Learn more about worksheet at:
https://brainly.com/question/13129393
#SPJ1
Given what you know about the formation of photochemical smog, in which of the following situations is it most likely to occur?
Rural area in a low-sunshine location
Rural area in a high-sunshine location
Urban area in a high-sunshine location
Urban area in a low-sunshine location
Answers
Photochemical smog is formed when sunlight interacts with certain air pollutants, such as nitrogen oxides (NOx) and volatile organic compounds (VOCs), in the presence of sunlight.
Therefore, it is most likely to occur in an urban area in a high-sunshine location.
In an urban area, there are typically higher concentrations of vehicles, industrial emissions, and other human activities that release NOx and VOCs into the air. These pollutants can accumulate in the urban atmosphere, and when exposed to sunlight, they can undergo photochemical reactions that result in the formation of photochemical smog.
High levels of sunlight are necessary for the formation of photochemical smog because the reactions that produce smog require energy from sunlight to occur. In rural areas or low-sunshine locations, the availability of sunlight may be limited, which reduces the likelihood of photochemical smog formation. However, in urban areas with high levels of sunlight, combined with significant emissions of NOx and VOCs, the conditions for photochemical smog formation are more favorable.
learn more about photochemical smog here:
https://brainly.com/question/15728274
#SPJ11
What is the mode? 47 42 47 42 42 47 47 49 42 49 49 47 49 49 49 47 42 42 47 52
Answers
The mode of the given dataset is 47.
How can we determine the mode of a dataset?The mode is a statistical measure that represents the most frequently occurring value in a dataset. In the given dataset, the value 47 appears the most number of times, making it the mode.
The mode is a useful measure to identify the central tendency or the most common value in a set of data. It is especially helpful when dealing with categorical or discrete data, where finding the most frequent value provides valuable insights.
Learn more about mode
brainly.com/question/28566521
#SPJ11
17. Electrospinning is a broadly used technology for electrostatic fiber formation which utilizes electrical forces to produce polymer fibers with diameters ranging from 2 nm to several micrometers using polymer solutions of both natural and synthetic polymers. Write down 5 different factors that affect the fibers in this fabrication technique. (5p) 18. Write down the definition of a hydrogel and list 4 different biological function of it. (Sp) 19. A 2.0-m-long steel rod has a cross-sectional area of 0.30cm³. The rod is a part of a vertical support that holds a heavy 550-kg platform that hangs attached to the rod's lower end. Ignoring the weight of the rod, what is the tensile stress in the rod and the elongation of the rod under the stress? (Young's modulus for steel is 2.0×10"Pa). (15p)
Answers
The elongation of the rod under stress is 0.09 m or 9 cm. Five factors that affect the fibers in electrospinning fabrication technique.
1. Solution properties: The solution concentration, viscosity, surface tension, and conductivity are examples of solution properties that influence fiber morphology.
2. Parameters of electrospinning: Voltage, flow rate, distance from the needle to the collector, and needle gauge are examples of parameters that influence the fiber diameter and morphology.
3. Physicochemical properties of the polymer: The intrinsic properties of the polymer chain, such as molecular weight, crystallinity, and orientation, influence the morphology and properties of the fibers.
4. Ambient conditions: Humidity, temperature, and air flow rate can all influence fiber morphology.
5. Post-treatment: Electrospun fibers can be subjected to post-treatments such as annealing, solvent treatment, and crosslinking, which can influence their mechanical, physical, and chemical properties.Answer to question 18:A hydrogel is a soft, jelly-like material that is primarily composed of water and a polymer network. Hydrogels have a range of biological functions due to their properties such as mechanical and biocompatible. Some of the biological functions of hydrogel are mentioned below:
1. Drug delivery: Hydrogels are widely utilized in drug delivery systems, particularly for the sustained release of drugs over time.
2. Tissue engineering: Hydrogels are frequently used as biomaterials in tissue engineering due to their similarities to the extracellular matrix (ECM).
3. Wound healing: Hydrogels are employed in wound healing due to their potential to promote tissue regeneration and repair.
4. Biosensing: Hydrogels are utilized in the production of biosensors that are capable of detecting biological and chemical compounds. Answer to question 19:Given,Magnitude of the force acting on the rod, F = 550 kg × 9.8 m/s² = 5390 NArea of the cross-section of the rod, A = 0.30 cm³ = 0.3 × 10^-6 m³Length of the rod, L = 2.0 mYoung's modulus of steel, Y = 2.0 × 10¹¹ N/m²The tensile stress in the rod is given by the relation;Stress = Force / Areaσ = F / Aσ = 5390 N / 0.3 × 10^-6 m²σ = 1.80 × 10^10 N/m²The elongation of the rod under stress is given by the relation;Strain = Stress / Young's modulusε = σ / Yε = 1.80 × 10¹⁰ N/m² / 2.0 × 10¹¹ N/m²ε = 0.09. The elongation of the rod under stress is 0.09 m or 9 cm.
Learn more about morphology :
https://brainly.com/question/1378929
#SPJ11
which network index technology allows users to locate resources on a private network, keeps track of which servers and clients are online, and identifies the resources that network hosts share?
Answers
Directory services refer to the network index technology that allows users to locate resources on a private network, keep track of which servers and clients are online, and identify the resources that network hosts share.
Directory services are a type of network service that keeps track of network resources on a private network such as servers, printers, and user accounts.
What are directory services?Directory services are a sort of network service that keeps track of network resources on a private network such as servers, printers, and user accounts. Directory services are required for managing big groups of users and network resources.
A directory service, which keeps track of which servers and clients are online and identifies the resources that network hosts share, allows users to access resources on a private network.
Directory services are used to manage the access control and security rules of a network. This is made feasible by the development of a hierarchical namespace, which allows network managers to manage network resources and user accounts more efficiently. The directory service provides a central location for user authentication and resource management.
Directory services employ a client-server architecture, with client software running on users' computers and server software running on dedicated servers. This allows users to connect to network resources and services with ease.
Learn more about private networks:
https://brainly.com/question/28259085
#SPJ11
discuss the evolution of data storage. where is this technology today and comment on data storage for big data, mobile devices, and the cloud?
Answers
The evolution of data storage can be traced back to the 1800s when people started storing information in the form of punched cards. This method of storing data remained in use until the 1970s when magnetic tape was invented.
The advent of magnetic tape led to the development of hard disk drives (HDDs), which offered larger storage capacities and faster data transfer rates. In the 1980s, optical disks such as CDs and DVDs were introduced. These disks provided even greater storage capacity and longevity.
In the late 1990s and early 2000s, solid-state drives (SSDs) started gaining popularity due to their faster read and write speeds and lower power consumption. Today, data storage technology has advanced to the point where we have cloud storage, which has revolutionized how we store and access data
Learn more about hard disk at;
https://brainly.com/question/30829721
#SPJ11
Overview Write a program that reads an integer from the user and then prints the Hailstone sequence starting from that number "What is the hailstone sequence?" you might ask. Well, there are two rules: • If n is even, then divide it by 2 • If n is odd, then multiply it by 3 and add 1 Continue this sequence until you hit the number 1.
Answers
n=int(input("Enter number: "))
while n != 1:
print(n)
if n%2==0:
n//= 2
else:
n = (n*3)+1
print(n)
I wrote my code in python 3.8. If you want to print the 1, keep the last line of code otherwise delete it.
Internal control components are built on the foundation of the ------- tone established by top management in its control environment.
Answers
Internal control components are built on the foundation of the ethical tone established by top management in its control environment.
Computer ethics is the study of the rules, principles, and practices that guide the use of computing technology and the disciplines that are related to it without impairing or infringing upon the moral principles and convictions of any one person, group, or entity.
Computer ethics is a notion in ethics that discusses the ethical problems and restrictions that result from using computers, as well as ways to prevent or minimize them.
Here you can learn more about ethical in the link brainly.com/question/11992384
#SPJ4
What is the significance of XML tags?
A.) They are self-descriptive.
B.) They are predefined.
C.) They are only computer readable.
D.) They are only human readable.
Answers
Answer:
your answer would be to ur question would be B
Answer:
It is self-descriptive
Explanation:
Plato Users
Create a use/abuse case diagram. must include the legitimate use cases as well as the corresponding abuse cases.
Use Case: ATM User: Good Customer ---- Uses personal credentials to log into atm (PIN Number)---- Makes authorized withdrawals from personal
account Administrator ---- Maintains the system, and ensures it opens and shutdowns after each transaction
Abuse Case: Bad Customer ---- Uses other’s credentials to gain unauthorized access to bank accounts
Answers
The use/abuse case diagram for an ATM system includes legitimate use cases involving ATM users and administrators, as well as corresponding abuse cases. The legitimate use cases encompass activities such as logging in with personal credentials and making authorized withdrawals, while the abuse case involves unauthorized access to bank accounts using someone else's credentials.
Legitimate Use Cases:
1. ATM User: Good Customer
Uses personal credentials to log into the ATM (PIN Number)Makes authorized withdrawals from their personal account2. Administrator
Maintains the systemEnsures the ATM opens and shuts down properly after each transactionAbuse Case:
1. Bad Customer
Uses someone else's credentials to gain unauthorized access to bank accounts
The use/abuse case diagram for the ATM system illustrates the different legitimate use cases involving ATM users and administrators, as well as the corresponding abuse case. The legitimate use cases involve actions performed by good customers, including logging in with their personal credentials and making authorized withdrawals. On the other hand, the abuse case represents the misuse of the system by bad customers, who attempt to gain unauthorized access to bank accounts using someone else's credentials. It is crucial to implement appropriate security measures and safeguards to prevent such abuse cases and protect the privacy and security of customers' financial information.
Learn more about ATM System :
https://brainly.com/question/33328432
#SPJ11
Which one of the following is not an advantage or disadvantage of shifting to robotics-assisted camera assembly methods? Copyright owl Bus Software Copyna distributing of a party website posting probled and cont copyright violation The capital cost of converting to robot-assisted camera assembly can increase a company's interest costs to the extent that a portion of the capital costs are financed by bank loans O Robot-assisted camera assembly increases the annual productivity of camera PATs from 3,000 to 4,000 cameras per year. Robot-assisted camera assembly reduces the size of product assembly teams from 4 members to 3 members Robot-assisted assembly reduces total annual compensation costs per PAT and also reduces the overtime cost of assembling a camera O Robot-assisted camera assembly increases annual workstation maintenance costs
Answers
The option "Robot-assisted camera assembly increases annual workstation maintenance costs" is not an advantage or disadvantage of shifting to robotics-assisted camera assembly methods.
Shifting to robotics-assisted camera assembly methods can have various advantages and disadvantages. However, the specific option mentioned, which states that robot-assisted camera assembly increases annual workstation maintenance costs, does not fall under the advantages or disadvantages typically associated with this shift. It is important to note that the option suggests a negative aspect, but it does not directly relate to the advantages or disadvantages of robotics-assisted camera assembly.
The advantages of shifting to robotics-assisted camera assembly methods often include increased productivity, reduction in assembly team size, decreased compensation costs, and improved efficiency. Disadvantages may include high initial capital costs, potential financing-related interest costs, and potential challenges in maintenance and repairs. However, the mentioned option about increased workstation maintenance costs does not align with the typical advantages or disadvantages associated with robotics-assisted camera assembly methods.
Learn more about Robot-assisted camera here:
https://brainly.com/question/27807151
#SPJ11
(TOPIC: Video Games) For a bit of fun, What's you're *favorite* video game? And why?
Answers
Answer:
I love Breath of the Wild.
Explanation:
It is my favorite game of all time! Don't get mad at me, but I actually don't mind Zelda's English VA. It just has that tone of maturity in her voice that I really like. But I agree with all of you when I say that I wish that Patricia Summersett (Zelda's VA) did a better job with Zelda's cry in the Despair Cutscene (memory # 16). It just sounds like she is having a hard time breathing lol. But back to why I love the game: I LOVE THE SCENERY! IT IS ABSOLUTELY "BREATH"TAKING (haha see what I did there)! And also, Urbosa is queen. I wish she was in Smash instead of stoopid Piranha Plant.
Choose the correct color to complete the sentence.
It is generally understood that
Blank is the best color choice for a global audience.
Answers
Answer:blue is the best color choice for a global audience.
A language processor converts program written in a programming language into machine language
Answers
Answer:
True
Explanation:
Is the question true or false? If yes, then the answer is true.
The computer/machine do not understand high level and low level languages.
These languages are often referred to as non machine languages.
So, the language processor, also known as translators, help translate programs written in these non machine languages to the equivalent in machine language.
There are 3 basic types; and they are assembler, interpreter and compiler.
Write a program in the if statement that sets the variable hours to 10 when the flag variable minimum is set.
Answers
Answer:
I am using normally using conditions it will suit for all programming language
Explanation:
if(minimum){
hours=10
}
From within word, you can search through various forms of reference informationa. Trueb. False
Answers
The statement is True. From within Word, you can search through various forms of reference information.
Microsoft Word provides built-in tools that allow users to search for and access various forms of reference information directly within the application. These reference materials can include dictionaries, thesauruses, and translation services. By selecting a word or phrase and using the "Research" or "Smart Lookup" feature in Word, users can access relevant definitions, synonyms, antonyms, translations, and other reference information to enhance their writing and understanding of the text. This feature provides a convenient way to gather information and improve the quality of written content without needing to leave the Word application or consult external sources.
To learn more about Microsoft Word click here : brainly.com/question/12683052
#SPJ11
Which avenue may utilize video streaming, audio narration, print designs and animation?
The (blank) may utilize video streaming, audio narration, print designs and animation.
Answers
Answer:
Multimedia avenue.
Explanation:
A file type is the standard used to store data such as pictures, texts, videos, and audios. All file types have unique file extension that determine which program to use to open a particular file and to access its data e.g pictures (jpeg, png), texts (txt, docx, rtf), videos (mp4, 3gp, avi), audios (mp3, acc).
Sometimes, computer users make the mistake of opening files with the wrong software application or program, this often leads to an error due to the incompatibility of the software application with the particular file.
Basically, all software applications are designed and developed for use with specific file extensions or formats and as such, when used to open a file it isn't developed for, it result in an error.
A multimedia avenue refers to a channel that is designed and developed to accept, utilize and combine various file formats such as audio, video, text, animation effects, etc. A common example of a multimedia avenue is Microsoft PowerPoint software.
Hence, the multimedia avenue may utilize video streaming, audio narration, print designs and animation.
Which of the following is an executable file that manages the printing process, which includes retrieving the location of the correct print driver, loading the driver, creating the individual print jobs, and scheduling the print jobs for printing
Answers
The executable file that manages the printing process, including retrieving the location of the correct print driver, loading the driver, creating the individual print jobs, and scheduling the print jobs for printing is called the "Print Spooler."
The Print Spooler is responsible for handling the printing tasks on a computer. It manages the printing process by coordinating between the applications that request printing, the printer drivers, and the physical printer. It retrieves the location of the correct print driver, which is required to communicate with the specific printer model.
Then, it loads the driver into memory so that it can be used by the operating system to convert the print job into a format that the printer can understand. After that, the Print Spooler creates individual print jobs by organizing the print data from different applications and sends them to the printer in the correct order. It also schedules the print jobs for printing, ensuring that they are processed efficiently and in a timely manner.
The Print Spooler is an essential component of the printing system in an operating system. It acts as an intermediary between the applications that need to print and the physical printer. When an application sends a print request, the Print Spooler receives the request and processes it by retrieving the location of the correct print driver. The print driver is specific to the printer model and is required to translate the print data into a format that the printer can understand.
Once the Print Spooler has located and loaded the appropriate driver, it creates individual print jobs by organizing the print data from multiple applications. This ensures that the print jobs are processed in the correct order and are sent to the printer efficiently. The Print Spooler also manages the print queue, which holds the print jobs waiting to be processed. It schedules the print jobs for printing, taking into account factors such as priority and availability of the printer.
The Print Spooler is an executable file that plays a crucial role in managing the printing process. It retrieves the correct print driver, loads it into memory, creates individual print jobs, and schedules them for printing. Without the Print Spooler, the printing process would be inefficient and unorganized.
To know more about Print Spooler :
brainly.com/question/32267932
#SPJ11
According to the Trust Services Framework, the reliability principle of integrity is achieved when the system produces data that Group of answer choices can be maintained as required without affecting system availability, security, and integrity. is protected against unauthorized physical and logical access. is complete, accurate, and valid. is available for operation and use at times set forth by agreement.
Answers
According to the Trust Services Framework, the reliability principle of integrity is achieved when the system produces data that is complete, accurate, and valid, while also being protected against unauthorized physical and logical access.
The reliability principle of integrity, as defined by the Trust Services Framework, ensures that the data produced by a system is trustworthy and dependable. To achieve this, the data must possess certain qualities. Firstly, it should be complete, meaning that it includes all necessary information and is not missing any relevant components. Additionally, the data must be accurate, reflecting the true and correct values without any errors or inconsistencies. Lastly, the data must be valid, conforming to the defined rules and constraints, ensuring its reliability for decision-making and other purposes.
However, achieving integrity is not solely limited to the accuracy and completeness of the data. It also involves safeguarding the data against unauthorized access, both physically and logically. Physical access refers to the protection of the system and its data from physical breaches, such as unauthorized entry into a data center or theft of storage devices. Logical access, on the other hand, involves securing the data against unauthorized manipulation or retrieval through appropriate access controls, encryption, and other security measures.
By maintaining data integrity and protecting it against unauthorized access, organizations can ensure the reliability of their systems and the trustworthiness of the data they produce. This, in turn, contributes to the overall availability, security, and integrity of the system as a whole, meeting the requirements set forth by the Trust Services Framework.
Learn more about Trust Services Framework here:
https://brainly.com/question/32319417
#SPJ11
as we move up a energy pyrimad the amount of a energy avaliable to each level of consumers
Answers
Explanation:
As it progresses high around an atmosphere, the amount of power through each tropic stage reduces. Little enough as 10% including its power is passed towards the next layer at every primary producers; the remainder is essentially wasted as heat by physiological activities.
you want to modify the value of the default textview control in a new android app, what should you do?
Answers
Edit the strings.xml file if you wish to change the default value of the text view control in a new Android application.
An Android application is a piece of software made to operate on an actual Android device or an emulator. APK files, which stand for Android packages, are also included in this definition. This document is a Zip archive that includes the app code, resources, and metadata.
Apps for Android can be created in Kotlin, Java, or C++ and are executed by a virtual machine. Android Studio is the approved developer environment.
The installation of apps via an APK file or a USB connection can be enabled in the device settings because apps are typically distributed through app markets like the Play Store.
It must have a distinct package name stored in the meta-information in order to be installed or distributed as an APK in stores. Following installation, the Package Manager records this name.
Learn more about Android application here:
https://brainly.com/question/29427860
#SPJ4
The feed-mix problem from agricultural applications is a special case of the more general.
Answers
The feed-mix problem from agricultural applications is a special case of the more general Diet problem.
What are Diet Problem?
The goal of the diet problem is to choose a set of foods that will meet a set of daily nutritional requirements at the lowest possible cost. The problem is written as a linear program with the goal of minimizing costs and the constraints of meeting the specified nutritional requirements.
Dietary constraints typically govern the number of calories as well as the amount of vitamins, minerals, fats, sodium, and cholesterol consumed. While the mathematical formulation is straightforward, the solution may not be appealing! Nutritional needs can be met without regard for taste or variety, so think about the outcome before diving into a meal from an "optimal" menu!
To know more about linear program, visit: https://brainly.com/question/24038519
#SPJ4
PLEASE I NEED HELP!!!!! ASAP! Carly was given a writing assignment. In three to five sentences, give her some advice to help her plan and organize her writing.
Answers
Explanation:
She should take care of grammar for this she should have a dictionary,a plan on how to solve the assignment i.e ,which question she should write first and Which one at the last.
how do u get rid of this (the grey box)
Answers
Answer:
can't helpnyounddjdjzjzjsjejs jvm d
a _____ is a statement of policy that restricts the ways in which data can be inserted, updated, or deleted in a database.
Answers
A database constraint is a statement of policy that restricts the ways in which data can be inserted, updated, or deleted in a database.
The statement of policy that restricts the ways in which data can be inserted, updated, or deleted in a database is known as a "database constraint".
Database constraints are used to ensure the accuracy, reliability, and consistency of data within a database. They can be applied to one or more columns in a table, and they can prevent data from being entered into a database that does not meet specific criteria or violates certain rules.
Some common types of database constraints include primary key constraints, foreign key constraints, check constraints, and unique constraints.
Learn more about database here:
https://brainly.com/question/518894
#SPJ11
What will you see on the next line?
>>> round(9.6)
Answers
If you input round(9.6) you will see 10 on the next line.
Answer:
10
Explanation:
Edge 2022
Role playing games have an objective of trying to gain the most points in a certain period of time.
Group of answer choices
True
False
Answers
Answer: I think False.