Which type of water-cooled condenser consists of only two tubes with water flowing in one direction in one tube and refrigerant flowing in the opposite direction in the other tube?

Answer:

10

Explanation:

The pressure difference across the sensor housing will be "95 kPa".

According to the question, the values are:

Altitude,

Speed,

Pressure,

The temperature will be:

→ \(T = 15.04-[0.00649(9874)]\)

→     \(= 15.04-64.082\)

→     \(= -49.042^{\circ} C\)

now,

→ \(P_o = 101.29[\frac{(-49.042+273.1)}{288.08} ]^{(5.256)}\)

→      \(= 27.074\)

hence,

→ The pressure differential will be:

= \(122-27\)

= \(95 \ kPa\)

Thus the above solution is correct.

Learn more about pressure difference here:

https://brainly.com/question/15732832

I'd say number 4, number 3 looks like an exhaust valve

Answer:

this is the answer

Explanation:

this the summery about engineering

The rise time, peak time, maximum overshoot, and settling time in the unit-step response of the given closed-loop system are 0.374 sec, 0.433 sec, 38.5%, and 1.76 sec, respectively.

The closed-loop transfer function given is G(s) = s² + 44s + 64, and the task is to determine the rise time, peak time, settling time, and maximum overshoot of the system. The general transfer function of a 2nd order system is given by:

T(s) = ωn²/(s² + 2ζωn + ωn²), Where ωn = Natural frequency, ζ = Damping ratio

Comparing the given transfer function with the standard form,ωn² = 64,ωn = √64 = 8.

From the given transfer function, 2ζωn = 44ζ = 44/16 = 2.75

From these values, the transfer function of the system is:

T(s) = 64/(s² + 11s + 64)

The expression for the unit step response of a second-order system is given by:

y(t) = 1 - (1 / √1-ζ²) * e^(-ζωn*t) * sin(ωn*√1-ζ²*t + φ)

The rise time is defined as the time taken by the system to reach from 10% to 90% of the final value. So, for the given system, it can be calculated as:

r.t = 1.76 / ζωn

Now, substituting the value of ζ, we get:

r.t = 0.374 sec.

The peak time is the time taken by the response to reach its peak value. It is given by:

Tp = π / ωd

Now, the damped natural frequency is given as,ωd = ωn * √1-ζ²

So,ωd = 8 * √1 - 2.75² = 7.25 rad/s

Hence,Tp = π / 7.25 = 0.433 sec.

The maximum overshoot is the percentage by which the response overshoots the steady-state value. It is given by:

M.P.O. = e^(-πζ/√1-ζ²) * 100%

Substituting the value of ζ, we get

:M.P.O. = 38.5%.

The settling time is defined as the time taken by the system to settle within a certain percentage of the final value. It is given by:

T.S. = 4 / ζωn

Hence, T.S. = 1.76 sec.

To learn more about closed-loop system, visit:

https://brainly.com/question/11995211

#SPJ11

Answer:

The correct answer is "\(O (n\times Log n)\)". A further explanation is given below.

Explanation:

Answer: I believe the answer is 963.75 if I am reading the question right.

Explanation:

ACH=60L/V

ACH=2.25

V=25,700

25,700*2.25=57,825

57,825/60=963.75

L=963.75

60(963.75)/25,700=2.25

The maximum amount of air leakage that would result in an ACH of no more than 2.25 would be approximately 956.25 cfm (cubic feet per minute).

Given that ACH of a house is a measure of its​ air-tightness and the formula for ACH is ACH = 60L/V. It means that ACH is inversely proportional to air-tightness or leakage. Therefore, the lower the air leakage the higher the ACH and vice versa.Mathematically, it is represented as:ACH ∝ 1/L or L ∝ 1/ACH

We can solve the question as follows:ACH = 2.25 (since the maximum ACH is 2.25)The volume of the house, V = 25,700 cubic feet.Substituting in the formula,2.25 = 60L/25,700Dividing both sides by 2.25 gives us,L = (2.25 * 25,700)/60L = 956.25 cubic feet per minute (cfm)

Therefore, the maximum amount of air leakage that would result in an ACH of no more than 2.25 is approximately 956.25 cfm (cubic feet per minute).

Learn more about ACH​ (air changes per​ hour)  at https://brainly.com/question/13326171

#SPJ11

Answer:

Forces like wind and water break down rocks through the processes of weathering and erosion. ... Forces like wind and water move the rock pieces. They mix with matter like sand to become sediment. Weathering and erosion help shape Earth's surface.

Answer:

As an agent of erosion, the wind will quickly break the rock into different rock types.

Explanation:

Answer:

Gauge Pressure = 408.3 KPa

Explanation:

The pressure inside the pipe can be given in terms of the elevation, by the following formula:

P = ρgΔz

where,

P = Absolute Pressure = ?

ρ = Density of Water = 1000 kg/m³

g = acceleration due to gravity = 9.8 m/s²

Δz = elevation = 52 m

Therefore,

P = (1000 kg/m³)(9.8 m/s²)(52 m)

P = 509.6 KPa

Now, for gauge pressure:

Gauge Pressure = P - Atmospheric Pressure

Gauge Pressure = 509.6 KPa - 101.3 KPa

Gauge Pressure = 408.3 KPa

To solve this problem in C++, you can read in the integers one by one using a loop, and keep track of the count of integers read so far. Once you encounter a negative number, you can stop reading input.

Since the list is sorted, you can calculate the middle integer index by dividing the count of integers by 2 (using integer division). You can then output the integer at this index.
Here is some sample code that implements this approach:
```
#include
using namespace std;

int main() {
   int num, count = 0;
   int middleIndex;

   while (cin >> num) {
       if (num < 0) {
           break;
       }
       count++;
       if (count == 1) {
           // first number read in
           middleIndex = 0;
       }
       else if (count % 2 == 0) {
           // even count of integers read in, middle index is between two integers
           middleIndex++;
       }
   }
   // output the middle integer
   cout << "Middle integer is: " << middleIndex << endl;

   return 0;
}
```
Note that in this example, we are not actually storing the sorted list of integers in an array or other data structure. We are simply keeping track of the count of integers read in and the index of the middle integer. This is possible because we know that the list is sorted and that the number of integers is always odd.

Learn more about loop here

https://brainly.com/question/19706610

#SPJ11

Answer:

yes it is very hard you should find a reccomended doctor to aid in your situation. But in the meantime how about you give me that lil brainliest thingy :p

Answer:

whatsthe question choices

Answer:

Explanation:

The process that Piaget called "adding another example to an existing scheme" is called assimilation. Assimilation refers to the cognitive process of incorporating new information or experiences into existing mental schemas or frameworks. In this case, Tammy assimilates the new example of a golf ball into her existing "ball" scheme, expanding her understanding of what falls under the category of a ball.

The overall gain of the amplifier is 15.

The overall gain of the amplifier can be calculated by multiplying the gain of the first stage with the gain of the second stage.

Given that the unloaded gain of the first stage is 30 and it drops to 15 after adding the second stage, we can calculate the gain of the second stage by dividing the overall gain by the gain of the first stage:

Gain of the second stage = Overall gain / Gain of the first stage
Gain of the second stage = 15 / 30
Gain of the second stage = 0.5

Now, we know that the gain of the second stage is 0.5.

To find the overall gain of the amplifier, we multiply the gain of the first stage with the gain of the second stage:

Overall gain = Gain of the first stage * Gain of the second stage
Overall gain = 30 * 0.5
Overall gain = 15

Therefore, the overall gain of the amplifier is 15.

To know more about amplifier visit:

https://brainly.com/question/29604852

#SPJ11

Answer:

Some of the benefits are tangible for they are visible in the design and production process, while the other benefits are intangible which may not be visible directly but result in improvement in the quality of product, better control over designing and production process, reduction of stress on the designers etc.

Answer:

It does not take into consideration what the responsible party knew about the law or regulation they violated. Environmental criminal liability is triggered through some level of intent.

In regards to whether an employee can be held legally liable for environmental violations, this statement is False.

This means that if an employee notices that a company is responsible for environmental violations, and does nothing about it, they could be held legally responsible for the violation as well.

In conclusion, this is true.

Find out more on environmental violations at https://brainly.com/question/15119899.

The magnitude of σ1 that will cause yielding according to the maximum-shear-stress theory is 9.94 ksi.

Yield stress for the zirconium-magnesium alloy, σY = 15.3 ksi

In-plane principal stresses are σ1 and σ2 = −0.54σ1

To find the maximum shear stress theory, the equation used is τ_max=1/2(σ1-σ2)

The maximum shear stress theory states that yielding begins when the maximum shear stress in a part equals or exceeds the shear strength of the material. It is represented as τ_max = τ_yield

Where τ_max is the maximum shear stress in a part and τ_yield is the shear strength of the material. In-plane principal stresses are σ1 and σ2 = −0.54σ1

Let us replace the value of σ2 in terms of σ1σ2 = −0.54σ1,σ1 = 1.85σ2

Substitute the values in the τ_max=1/2(σ1-σ2)

τ_max=1/2(σ1-(-0.54σ1))

τ_max=0.77σ1

Now, τ_yield= σY/2 = 7.65 ksi

Therefore, 0.77σ1 = 7.65

σ1 = 9.94 ksi

You can learn more about magnitude at: brainly.com/question/31022175

#SPJ11

The bandwidth available in some countries is insufficient for efficient transmission of Web pages with graphics and animations(C).

Bandwidth refers to the amount of data that can be transmitted over a network connection in a given amount of time. When there is insufficient bandwidth, the transmission speed slows down, causing delays and interruptions in the loading of Web pages, especially those with rich graphics and animations.

This problem is particularly acute in countries with less developed telecommunications infrastructure, where the available bandwidth is limited due to factors such as low investment in network infrastructure or regulatory restrictions on bandwidth allocation.

As a result, users in these countries may experience slower Internet speeds and lower-quality Web browsing experiences, which can have significant implications for their ability to access information, communicate with others, and participate in online activities. So  correct option is c.

For more questions like Web click the link below:

https://brainly.com/question/31420520

#SPJ11

Answer:

myjmjkkyjm

Explanation:

Tyjjhmjtymtyyjmjymjy

The area of the triangle when the base is 10 cm and the height is 7 cm is 35 cm.

To calculate the area of a triangle, the base, and height of the triangle are multiplied by 1/2.

Decide which side will serve as the triangle's base, then calculate the triangle's height from that base. After that, enter the height and base measurements you have into the formula.

A = kbh

36 = k (8)(9)

36 = k 72

36/72 = k 72/72

½ = k

A = (½)(10)(7)

A = (½)(70)

A = 35

Therefore, the area of the triangle is 35.

To learn more about area of the triangle, refer to the link:

https://brainly.com/question/21327457

#SPJ1

Small particles in your power steering system may Damage the hydraulic pump.

Check more about the reason for the above in the power steering system below:

If a person is said to have notice that there is  small black particles that can be seen inside of the power steering reservoir, there is therefore some chances that are these are some piece of the hose, instead of  the pump or rack.

Since High-temperature pulsations can be able to lead the power steering hoses to be destroyed  from the inside.

Therefore, based on the above, one can say that Small particles in your power steering system may Damage the hydraulic pump.

Learn more about power steering system   from

https://brainly.com/question/21346765
#SPJ1

This prompt is about Prince George's Wood Innovation Design Center. The building was erected as a model to highlight the possibilities of wood innovation and a departure from conventional concrete and steel architecture and building engineering models.

The Wood Innovation Design Centre (WIDC) is a meeting space for researchers, educators, and design professionals who are brainstorming new ways to use wood. The bottom floors of the building are dedicated to Integrated Wood Design instruction.

The Wood Innovation and Design Centre is located in Prince George, British Columbia. Michael Green Architecture ("Wood Innovation and Design Centre" n.p.) designed the 97-foot-tall, eight-story (six-story includes mezzanine and penthouse) structure.

The building's sleek, contemporary box shape is purposefully simple. Its simplicity serves as a canvas for the beauty of the numerous kinds of wood and their features, which include Douglas-fir, western red cedar, hemlock, pine, and spruce from British Columbia's sustainable forests.

Learn more about Wood Innovation:
https://brainly.com/question/20531145
#SPJ1

Answer:

2/4

7/2

92/1

83/1

9/1

93/0

Explanation:

R

K

K

R

K

R

I don't really know the answer

Creating a truth table or mathematical equation for a circuit that is designed to harm or destroy any location, including New Jersey or any other place, is against ethical and moral guidelines.

It is not appropriate to engage in discussions or provide guidance on activities that involve illegal, harmful, or unethical behavior. If you encounter any situation that may pose a threat to individuals, communities, or the environment, it is important to report it to the appropriate authorities immediately.

So, if you have a legitimate and legal question related to circuit design or any other appropriate topic, Please refrain from requesting guidance or information on any illegal or harmful activities.

To know more about switches  here:

https://brainly.com/question/30214142

#SPJ1

In the given METAR/TAF for HOU, the ceiling and visibility forecast on the 7th day of the month at 0600Z is 4 statute miles visibility and an overcast ceiling at 1,200 feet AGL.

What is METAR/TAF?

METAR stands for Meteorological Terminal Aviation Routine Weather Report. It is an hourly weather observation reported from airports. TAF stands for Terminal Aerodrome Forecast. It is a weather forecast prepared for an airport that contains critical meteorological data.

What is ceiling and visibility forecast?

Ceiling and visibility forecast is the prediction of cloud cover height and visibility range. It is an important aspect for aviation as it provides information on the conditions in which aircraft can safely operate. Cloud cover height is represented in feet Above Ground Level (AGL) and visibility is represented in statute miles (SM). Hence, the ceiling and visibility forecast on the 7th day of the month at 0600Z in the given METAR/TAF for HOU is 4 statute miles visibility and an overcast ceiling at 1,200 feet AGL.

To learn more about forecast METAR/TAF : https://brainly.com/question/14276863

#SPJ11

The given code snippet is for printing each price in stock prices. Let's breakdown the code and see what it does: stock_prices - input().split() This statement converts the input into a list container.

It takes input from the user and splits it into a list of elements separated by whitespace characters. Here, the variable 'stock_prices' stores the list of prices that we have entered. for "solution goes here": print('s', price) Here, we loop through each price in the list and print it along with a prefix 's'. This prefix can be removed as it is not required for the given problem statement. The corrected code snippet is given below: stock_prices = input().split()for price in stock_prices:    print(price) We can run this code and test the output with the sample inputs given in the question. The output will be: 34.62 76.30 85.05

To know more about snippet visit:

https://brainly.com/question/30471072

#SPJ11

Using python, the required program whereby individual prices are printed with the currency sign attached can be written as stated below

To print each price in stock prices, you can use a loop to iterate through the list and print each value preceded by the dollar sign symbol "$". Here's an example expression in Python:

stock_prices = [34.62, 76.30, 85.05]

#creating a list of stock prices with the variable name stock_prices

for price in stock_prices:

print("$", price)

#iterate through each price in the list and add the dollar sign

Hence, the program prints each and every value in the stock price list with a dollar sign attached to each printed price.

Learn more on programs :https://brainly.com/question/28675211

#SPJ4