Warning signs are sometimes placed on aerosol cans to prevent people from throwing them into a fire. What is true about the gas in the aerosol can after it is placed in a fire

Answer:

here you go

Explanation:

5 elements and properties:

Boron- The chemical properties of boron are more similar to carbon and silicon than elements of its own group, although boron is more electron deficient. Boron has a high affinity for oxygen-forming borates, and reacts with water at temperatures above 100 °C to form boric acid and other boron compounds.

Carbon- As a member of group 14 on the periodic table, it is nonmetallic and tetravalent—making four electrons available to form covalent chemical bonds. The most common isotope of carbon has 6 protons and 6 neutrons, and has an atomic mass of 12.0107 amu. Its ground state electron configuration is 1s22s22p2.

Nitrogen-  Nitrogen gas (chemical symbol N) is generally inert, nonmetallic, colorless, odorless and tasteless. Its atomic number is 7, and it has an atomic weight of 14.0067. Nitrogen has a density of 1.251 grams/liter at 0 C and a specific gravity of 0.96737, making it slightly lighter than air.

Oxygen- is the air you breath

Nickel- Nickel is a hard silver white metal, which forms cubic crystals. It is malleable, ductile, and has superior strength and corrosion resistance. The metal is a fair conductor of heat and electricity and exhibits magnetic properties below 345°C

5 compounds and properties:

Water - Formula: H2O = Hydrogen2 + Oxygen. ...

Hydrogen Peroxide - Formula: H2O2 = Hydrogen2 + Oxygen2 ...

Salt - Formula: NaCl = Sodium + Chlorine. ...

Baking Soda - Formula: NaHCO3 = Sodium + Hydrogen + Carbon + Oxygen3

Octane - Formula: C8H18 = Carbon8 + Hydrogen18

hope this helps

Answer:

Mass = 26.8 g

Explanation:

Given data:

Mass of sodium hydroxide are required = ?

Mass of water = 232 g

Molarity of solution = 2.88 M

Solution:

Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.

Formula:

Molarity = number of moles of solute / L of solution

1 g = 0.001 L

232 g = 0.001 L× 232 =0.232 L

By putting values in molarity formula,

2.88 M = number of moles / 0.232 L

Number of moles = 2.88 M ×0.232 L

Number of moles = 0.67 mol

Mass of NaOH:

Mass = number of moles × molar mass

Mass = 0.67 mol × 40 g/mol

Mass = 26.8 g

Answer:

D

Explanation:

usa testprep!!!!!

Of the following, a 0.1 M aqueous solution of sucrose will have the highest freezing point.
 Based on your question, the correct answer is:

"Of the following, a 0.1 M aqueous solution of __e. sucrose__ will have the highest freezing point."

This is because sucrose is a non-electrolyte and does not dissociate into ions in an aqueous solution, leading to a smaller change in the freezing point compared to the other ionic compounds listed.

To know more about Solution click here .

brainly.com/question/30665317

#SPJ11

Answer:

The periodic table is useful today for finding out all the elements that exists on Earth. The elements there can be used to write down chemical formulas, calculate things like molar mass/atomic mass of each element, atomic number for each, number of valence electrons each element has, the oxidation number for each, etc. Lastly, it can be used to predict the properties of elements yet to be discovered.

Explanation:

Hope it helped!

Therefore, the depth at which the pressure is twice the atmospheric pressure in a fluid of density p with its surface exposed to the atmosphere is given by the expression 2Po/(pg), where Po is the atmospheric pressure.

The depth at which the pressure is twice the atmospheric pressure in a fluid of density p with its surface exposed to the atmosphere can be calculated using the following expression: P = pgh where P is the pressure at a depth h, p is the density of the fluid, g is the acceleration due to gravity, and h is the depth. Since we want the pressure to be twice the atmospheric pressure, we can set P = 2Po, where Po is the atmospheric pressure. 2Po = pgh Solving for h, we get:h = 2Po/(pg)

Therefore, the depth at which the pressure is twice the atmospheric pressure in a fluid of density p with its surface exposed to the atmosphere is given by the expression 2Po/(pg), where Po is the atmospheric pressure.

Learn more about atmosphere here:https://brainly.com/question/24925283

#SPJ11

Hg is a heterogeneous mixture, not a homogeneous mixture.

In chemistry, a mixture is a substance consisting of two or more different chemical substances that are not chemically combined. A mixture is two or more substances physically combined in which they retain their identity and are mixed in the form of solutions, suspensions, and colloids.

A mixture is formed when two or more different substances are physically combined and can be separated into their original substances. A chemical reaction occurs when two or more substances combine to form a new substance that cannot be converted back into the original substance.

Learn more about mixture here

https://brainly.com/question/2331419

#SPJ4

Answer: 3.7926x1024 O atoms

Answer:

The pOH of a solution with a hydroxide ion, [OH-], of 7.34 X 10-³ M is 11.87.

pH and pOH are measures of the acidity or alkalinity of a solution. The pOH can be calculated from the pH using the following expression;

pOH + pH = 14

According to this question, a solution has a hydroxide ion, [OH-], of 7.34 X 10-³ M. The pH of a solution can be calculated as follows;

pH = - log {H}

pH = - log 0.00734

pH = 2.134

pOH = 14 - 2.134 = 11.87

Learn more about pOH at: https://brainly.com/question/31133653

#SPJ1

When pressure is constant. Temperature and volume is directly proportional.

According to Gay-Law, Lussac's the pressure of a given amount of gas, while the volume is held constant, changes directly with the absolute temperature of the gas.

Since one mole of The any ideal gas is meant to be 22.4L at STP, the gay-Lussacs law holds true. The ratios of the number of moles of gases to one another should continue to be factors and multiples of one another since this changes directly with heat (and inverse with pressure), but operates the same for all gases.

Under circumstances of constant mass and volume, Gay-law, Lussac's also known as Amonton's law, asserts that the absolute pressure and temperature of an ideal gas are directly related.

learn more about  Gay-Law, Lussac's refer

https://brainly.com/question/24691513

#SPJ13

The molar mass of BH3 is 13.84, so the number of hydrogen atoms in 14.32 grams of BH3 is 3.104 grams.

Explanation:

1 atom of B

3 atom of H

So grams of  BH₃ = 14.32 gram

To find the mass of hydrogen ,use the molar mass of  BH₃;

Molar mass of hydrogen  = 1 g/mol

Molar mass of boron = 10.8

molar mass of BH₃ 13.84

Mass of hydrogen  = 1 × 3/13.84 x 14.32

= 3.104

To learn more about molar mass from the given link:

https://brainly.com/question/12127540

#SPJ1

The molar mass of BH3 is 13.84, so the number of hydrogen atoms in 14.32 grams of BH3 is 3.104 grams.

In chemistry, the ratio of mass to weight of the compound is called the molar mass of a compound.

The molar mass M of a compound is calculated by dividing its mass by the number of moles of substance involved.

Expressed as MB = m/nB. where m is the total mass of the pure substance sample and nB is the molecular weight of substance B

In chemistry, the molar mass of a  compound is defined as the ratio between the mass  of any sample and the molar amount of that compound.

Molar mass is a mass property, not a molecular property of matter.

Molar mass is the mass (g) of a particular chemical element or  compound  divided by the amount (mol) of the substance.

The molar mass of a compound can be calculated by adding the standard atomic masses (g/mol) of the constituent atoms.

1 atom of B

3 atom of H

So grams of  BH₃ = 14.32 gram

To find the mass of hydrogen ,use the molar mass of  BH₃;

Molar mass of hydrogen  = 1 g/mol

Molar mass of boron = 10.8

molar mass of BH₃ 13.84

Mass of hydrogen  = 1 × 3/13.84 x 14.32

= 3.104

To learn more about molar mass from the given link:

brainly.com/question/12127540

#SPJ1

Here is a MATLAB code that calculates and plots the concentration profiles of NH ₃, NH₄+, NO₂-, and NO₃- as a function of time at T=298 K and neutral pH, given the rate constants and initial concentrations:

```matlab

% Rate constants (k) and initial concentrations ([C])

k1 = 0.1;   % Rate constant for NH₃ + H₂O₂ -> NH₂ + H₂O

k2 = 0.05;  % Rate constant for NH₂ + NO₃- -> NO₂- + H₂O

k3 = 0.08;  % Rate constant for NO₂- -> NO₃- + N₂

C_NH₃ = 1.0;    % Initial concentration of NH₃

C_H2₂O₂ = 0.5;   % Initial concentration of H₂O₂

C_NH₄ = 0.0;    % Initial concentration of NH₄+

C_NO₂ = 0.0;    % Initial concentration of NO₂-

C_NO₃ = 0.0;    % Initial concentration of NO₃-

% Time vector

t = 0:0.1:10;   % Time range from 0 to 10 with a step size of 0.1

% Calculation of concentrations at each time point

for i = 1:length(t)

   NH₃(i) = C_NH₃ * exp(-k1*t(i));

   NH₄(i) = C_NH₃ - NH₃(i);

   NO₂(i) = C_NO₂ + k₂ * (NH₄(i) - C_NH₄) * t(i);

   NO₃(i) = C_NO₃ + k₃ * NO₂(i) * t(i);

end

% Plotting concentration profiles

plot(t, NH₃, 'r-', t, NH₄, 'g-', t, NO₂, 'b-', t, NO₃, 'm-');

xlabel('Time');

ylabel('Concentration');

legend('NH₃', 'NH₄+', 'NO₂-', 'NO₃-');

```

The provided MATLAB code calculates and plots the concentration profiles of NH₃, NH₄+, NO₂-, and NO₃- as a function of time based on the given rate constants and initial concentrations. The code uses a time vector to define the time range for which the concentrations will be calculated.

Inside the for loop, the concentrations of NH₃, NH₄+, NO₂-, and NO₃- are calculated at each time point using the given rate constants and the previous concentrations. The concentration of NH₃ decreases exponentially over time due to the reaction NH₃ + H₂O₂ -> NH₂ + H₂O, where k1 is the rate constant. NH₄+ concentration is the difference between the initial NH₃ concentration and the current NH₃ concentration.

The concentration of NO₂- increases with time due to the reaction NH₂ + NO₃- -> NO₂- + H₂O, where k₂ is the rate constant. The change in NH₄+ concentration from its initial value is multiplied by k₂ and the time to calculate the increase in NO₂- concentration.

Finally, the concentration of NO₃- increases with time due to the reaction NO₂- -> NO₃- + N₂, where k₃ is the rate constant. The previous NO₂- concentration is multiplied by k₃ and the time to determine the increase in NO₃- concentration.

The resulting concentration profiles are then plotted using the plot function, with time on the x-axis and concentration on the y-axis. Each compound is represented by a different color line in the plot.

Learn more about the MATLAB code

brainly.com/question/31502933

#SPJ11

Answer:

factor = 5.5 3 sig figs = 5.50

The pressure will: decrease by the same factor

Explanation:

24.2/4.40

The volume will increase by a factor of 5.5.

The ideal gas law states that;

PV = nRT,

where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature expressed in kelvin (K).

However, in this case, the temperature is constant, which means that we can simplify the formula to

PV = constant

or

V₁P₁ = V₂P₂

where V₁ is the initial volume, P₁ is the initial pressure, V₂ is the final volume, and P₂ is the final pressure.

Since the pressure is constant in this case, the equation becomes

V₁ = V₂ (when P is constant).

Therefore, the volume increased by a factor of:

V₂/V₁ = 24.2 L/4.40 L = 5.5 times.

To learn more about the volume of a gas refer -https://brainly.com/question/28961686

#SPJ11

In 0.75 moles of caffeine, there are a total of 6 carbon atoms, 7.5 hydrogen atoms, 3 nitrogen atoms, and 1.5 oxygen atoms.

To determine the total number of atoms in 0.75 moles of caffeine, we need to consider the molecular formula of caffeine, which is C8H10N4O2. The molecular formula provides the ratios of each element present in the compound. By multiplying the number of atoms in each element by the corresponding coefficient in the molecular formula, we can calculate the total number of atoms. In this case, there are 8 carbon (C) atoms, 10 hydrogen (H) atoms, 4 nitrogen (N) atoms, and 2 oxygen (O) atoms in each molecule of caffeine. Multiplying these values by 0.75 moles will give us the total number of atoms in 0.75 moles of caffeine.

The molecular formula of caffeine, C8H10N4O2, provides the number of atoms for each element present in one molecule of caffeine. In this case, there are 8 carbon (C) atoms, 10 hydrogen (H) atoms, 4 nitrogen (N) atoms, and 2 oxygen (O) atoms.

To calculate the total number of atoms in 0.75 moles of caffeine, we need to multiply the number of atoms for each element by the coefficient in the molecular formula, and then multiply that by the number of moles (0.75 moles).

For carbon (C): 8 atoms x 0.75 moles = 6 atoms (since there are 8 carbon atoms in one molecule of caffeine).

For hydrogen (H): 10 atoms x 0.75 moles = 7.5 atoms (since there are 10 hydrogen atoms in one molecule of caffeine).

For nitrogen (N): 4 atoms x 0.75 moles = 3 atoms (since there are 4 nitrogen atoms in one molecule of caffeine).

For oxygen (O): 2 atoms x 0.75 moles = 1.5 atoms (since there are 2 oxygen atoms in one molecule of caffeine).

To learn more about molecular click here:

brainly.com/question/156574

#SPJ11

The final temperature be in order for the gas to have a final volume of 8.00 l at 1.00 atm pressure will be 140.0°C.

The relationship between the volume, temperature, and pressure of a gas is given by the Ideal Gas Law:

PV = nRT

where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature in Kelvin.

Since we want to find the final temperature required for a final volume of 8.00 L and a constant pressure of 1.00 atm, we can use the equation:

(1.00 atm) * (8.00 L) = nRT

We can convert the initial temperature and volume to Kelvin and moles, respectively, using the following conversion factors:

65.0°C = (65.0 + 273) K

2.00 L = (2.00 L) * (1.00 mole/22.4 L) = 0.089 mole

Now we can substitute the values into the equation:

(1.00 atm) * (8.00 L) = 0.089 mole * R * T

T = [(1.00 atm) * (8.00 L) / (0.089 mole * R)]

Since R = 0.0821 L atm/mol K, we can evaluate the final temperature:

T = [(1.00 atm) * (8.00 L) / (0.089 mole * 0.0821 L atm/mol K)] = 413.0 K

T = (413.0 K) - 273 = 140.0°C

Therefore, the final temperature must be 140.0°C in order for the gas to have a final volume of 8.00 L at 1.00 atm pressure.

Learn more about Ideal Gas Law here :

brainly.com/question/28257995

#SPJ4

Answer:

D. nose,trachea,bronchi,alveoli

Explanation:

sana po makatulong

Explanation:

No because the person on the bike is going faster then the person on foot.

The only piece of information we can deduce from the number "9" about a Fluorine atom is its atomic number.

Fluorine is an element with the atomic symbol F and the number 9. It is found in group 17 (group VIIa), at the top of the halogen family, on the opposite side of Oxygen and Neon. The lightest, riskiest, and most reactive of all the halogens is fluorine, which is positioned above chlorine on the periodic table.

With an electronegativity of 3.98, the fluorine atom is the most electronegative element in the periodic table. Its electron configuration is [He] 2s²2p⁵, or 1s²2s²2p⁵. It is extremely challenging to isolate and will ferociously shred an electron off practically any other atom.

Seven valence electrons make up fluorine. It is particularly reactive and electronegative because it only requires one more electron to complete its second shell.

To know more about halogen

brainly.com/question/11156152

#SPJ4

The number of years of science required for high school graduation can vary depending on the educational system and specific graduation requirements of the school or district. In many educational systems, including the United States, three years of science coursework are typically required for high school graduation. These courses often cover subjects such as biology, chemistry, and physics. However, it's essential to check with the specific educational institution or local education authorities to determine the exact science requirements for high school graduation in a particular area.\(\)

C. Reducing the temperature, is the two changes would make this reaction reactant-favored 2H₂+O₂ 2H₂O + energy

To make the given reaction reactant-favored, we need to shift the equilibrium towards the left side, favoring the formation of reactants (H₂ and O₂) rather than products (H₂O). This can be achieved by considering the impact of pressure and temperature on the reaction.

A. Reducing the pressure:

Reducing the pressure would not favor the reactants. According to Le Chatelier's principle, decreasing the pressure will shift the equilibrium towards the side with a higher number of moles of gas. In this case, both sides of the reaction have the same number of moles of gas (two moles), so reducing the pressure will not have a significant effect.

B. Increasing the pressure:

Increasing the pressure would not favor the reactants either. Again, according to Le Chatelier's principle, increasing the pressure will shift the equilibrium towards the side with fewer moles of gas. As both sides have the same number of moles of gas, changing the pressure will not impact the equilibrium.

C. Reducing the temperature:

Reducing the temperature would favor the reactants. The reaction is exothermic (releases energy), and according to Le Chatelier's principle, decreasing the temperature favors the reaction that produces heat. Therefore, reducing the temperature would shift the equilibrium towards the reactants (H₂ and O₂) side.

D. Increasing the temperature:

Increasing the temperature would not favor the reactants. In an exothermic reaction, increasing the temperature would shift the equilibrium towards the products (H₂O) side to absorb the additional heat.

In conclusion, reducing the temperature (option C) would make the reaction reactant-favored, favoring the formation of H₂ and O₂ rather than H₂O. Therefore, Option C is correct.

Know more about equilibrium here:

https://brainly.com/question/517289

#SPJ8

(D) 769 KJ energy evolved during the reaction of 48.7 g of Al, according to the reaction given.

Mass of aluminium (Al) = 48.7 g

Molar mass of aluminum (Al) = 27 g/mol

Heat of reaction = -852 KJ

Energy evolved = ?

Write the balanced chemical equation

    Fe₂O₃(s) + 2 Al(s)    →    Al₂O₃(s) + 2 Fe(s)

Calculate the number of moles of Al

    number of moles = mass / molar mass

Put the values

    number of moles of aluminum = 48.7 g / 27 g/mol

    number of moles of aluminum = 1.8037 mol

It is clear that the number of moles of Fe₂CO₃ is half of Al, divide the number of moles of Al by 2

    number of moles of Fe₂CO₃ = 1.8037 / 2

    number of moles of Fe₂CO₃ = 0.90185

    heat of reaction for 1 mole of Fe2CO3 = 852 KJ

    heat of reaction for 0.90185 moles of Fe₂CO₃ = 0.90185 mol × 852 KJ

    heat of reaction for 0.90185 moles of Fe₂CO₃ = 769 KJ

The complete question is attached.

You can also learn about heat of reaction from the following question:

https://brainly.com/question/2192784

#SPJ4

The alkene that would give only a ketone with three carbons as a product of oxidative cleavage is propene.

Oxidative cleavage of alkenes involves the breaking of the double bond and the addition of oxygen to form two carbonyl groups. The product formed depends on the position of the double bond and the number of carbon atoms on either side of it.

When propene undergoes oxidative cleavage, it forms a ketone with three carbons, namely acetone, as the only product. This is because propene has a double bond between the second and third carbon atoms, and upon cleavage, it forms two carbonyl groups, one on each end of the double bond, resulting in acetone with three carbons.

In contrast, alkenes with four or more carbon atoms will form a mixture of ketones and aldehydes upon oxidative cleavage.

To know more about propene refer here:

https://brainly.com/question/30714963#

#SPJ11

The statement "The so-called 'dark-reactions' are accelerated by light" is INCORRECT. The dark reactions, also known as the Calvin cycle, do not require light and are instead powered by the ATP and NADPH produced during the light-dependent reactions.

Your answer: The INCORRECT statement is: "Photosynthesis in plants occurs in two stages. The first uses water to reduce CO2 to carbohydrates. The second uses NADPH to convert ADP into ATP." In reality, the first stage is the light-dependent reactions, which convert light energy into chemical energy (ATP and NADPH) using water, and the second stage is the light-independent reactions (Calvin cycle), which use CO2, ATP, and NADPH to produce carbohydrates.

Visit here to learn more about chemical energy  : https://brainly.com/question/30288262
#SPJ11

The statement that is INCORRECT among the given options is: "Photosynthesis in plants occurs in two stages. The first uses water to reduce CO2 to carbohydrates. The second uses NADPH to convert ADP into ATP."

a). Photosynthesis in plants occurs in two stages. The first uses water to reduce CO2 to carbohydrates. The second uses NADPH to convert ADP into ATP.

b). Some organisms use hydrogen gas instead of water as a reducing agent.

c). The so-called "dark-reactions" are accelerated by light.

d). Both atoms of oxygen in the O2 produced by photosynthesis come from water.

The two stages of photosynthesis is:
1. The light-dependent reactions: These reactions occur in the thylakoid membrane and involve the conversion of light energy into chemical energy in the form of ATP and NADPH. Water is split, releasing oxygen gas as a byproduct.
2. The light-independent reactions (Calvin cycle): These reactions occur in the stroma of the chloroplast and use the ATP and NADPH generated in the first stage to convert CO2 into carbohydrates.

To know more about Photosynthesis :

https://brainly.com/question/29764662

#SPJ11

Answer:

electron configuration

Explanation:

The arrangement of electrons in the atomic orbitals of an atom is called the electron configuration. Electron configurations can be determined using a periodic table.

Answer: what materials transmits the most light waves?

Explanation:

change from solid to liquid

Explanation:

Answer:

9.03 x 10²³atoms

Explanation:

Given parameters:

Number of moles of CO₂  = 1.5mol

Unknown:

Number of atoms  = ?

Solution:

In a mole of a substance, we have the Avogadro's number of particles which is 6.02 x 10²³atoms.

  Using this number, we can determine the amount of atoms in any substance.

If;

       1 mole of CO₂ contains 6.02 x 10²³ atoms;

     1.5mole of CO₂ will contain 1.5 x 6.02 x 10²³ atoms

                                                = 9.03 x 10²³atoms

Exothermic reactions release heat when the reactants produce products. The process of respiration is an exothermic reaction as it releases heat. Thus, option D is correct.

An exothermic is a type of reaction that involves the release of heat during the reaction through product formation. The respiration reaction is exothermic as it involves the breakdown of oxygen and glucose into energy.

Thermal decomposition is an endothermic reaction as it requires energy for completion. Similarly, photosynthesis and reaction between ammonium nitrate and water are endothermic reactions as they also require energy from the external source.

Therefore, respiration is an exothermic reaction.

Learn more about the exothermic reaction here:

https://brainly.com/question/1373669

#SPJ5

If a human cell contains MHC molecules that are binding pathogen antigens, d. the cell will be targeted for digestion by NK cells.

MHC molecules, or Major Histocompatibility Complex molecules, are essential for the immune system to recognize and respond to foreign substances like pathogens. When a cell is infected by a pathogen, it presents antigens from the pathogen on its surface using MHC molecules, this process signals the presence of an infection to the immune system. In this situation, the cell will be targeted by Natural Killer (NK) cells, which are a type of lymphocyte that plays a vital role in the innate immune system. NK cells are capable of identifying and eliminating cells displaying foreign antigens bound to MHC molecules, this process helps the immune system control the spread of infections and prevents the pathogen from causing further damage.

In this case, antibodies will not be produced in the host, as the process involves the innate immune system and not the adaptive immune system. The secondary immune response will not be activated, since it is related to the memory of the adaptive immune system, which is not engaged here. Additionally, extra immunoglobins will not be secreted into the plasma, as this occurs in response to the adaptive immune system's activation. The primary focus is on the role of NK cells in targeting and eliminating infected cells displaying MHC-bound pathogen antigens. So therefore the correct answer is d. the cell will be targeted for digestion by NK cells, if a human cell contains MHC molecules that are binding pathogen antigens.

Learn more about immune system here:

https://brainly.com/question/31599820

#SPJ11