TCKNQY.BOB/CISP430ExamSpring2022.pdf 7/7 | - 100% + B 16) Graph Algorithms. Given the weighted graph diagram shown. Generate the router forwarding tables for EACH OF THE NODES using OSPF. You do not need to explicitly demonstrate the formal algorithm in detail, you only need to show the final answer in each table for each node, and, draw the resulting tree for each node. Node A Forwarding Table Destination Next Hop Cost Node B Forwarding Table Destination Next Hop Node C Forwarding Table Destination Next Hop Node D Forwarding Table Destination Next Hop Node E Forwarding Table Destination Next Hop UL JEUDE B с BACOE А O Hi Cost Cost Cost Cost 2Vv 82°F

Scientists use a variety of methods to learn about the layers deep inside Earth. One way is by studying seismic waves, which are waves of energy that travel through the Earth's interior during earthquakes.

By analyzing how seismic waves behave as they pass through different layers of the Earth, scientists can infer the composition and properties of each layer. Another way is by examining rocks and minerals that have been brought to the surface by volcanic activity or mountain building. By analyzing the composition of these rocks, scientists can learn about the deeper layers from which they originated. Additionally, scientists use computer models and simulations to study the behavior and composition of the Earth's interior.

To know more about earthquakes click here:

brainly.com/question/29500066

#SPJ4

The process you are referring to is called cyanide leaching, and it is commonly used in the mining industry to extract gold (gikd) from its ore. The unbalanced equation for the reaction is typically written as Au + CN- + O2 + H2O → Au(CN)2- + OH-

In this equation, gold (Au) reacts with cyanide ions (CN-) in the presence of oxygen (O2) and water (H2O) to form the soluble complex ion, gold cyanide (Au(CN)2-), and hydroxide ions (OH-). This complex can then be separated from the other components of the ore using various techniques, such as adsorption onto activated carbon or precipitation with zinc dust.

It is important to note that cyanide leaching can be a controversial and environmentally sensitive process due to the potential for the release of toxic chemicals and waste products.

You can learn more about cyanide leaching at: brainly.com/question/31630208

#SPJ11

Answer:

The resulting pressure of the gas when its volume decreases is 300 kN/m².

Explanation:

Given;

initial volume of the gas, V₁ = 80 L

number of moles of the gas, n = 0.5 moles

initial pressure of the gas, P₁ = 150 kN/m² = 150 kPa

Determine the constant temperature of the gas using ideal gas equation;

PV = nRT

where;

R is ideal gas constant = 8.315 L.kPa/K.mol

T is the constant temperature

\(T = \frac{P_1V_1}{nR} \\\\T = \frac{150.kPa \ \times \ 80 .L}{0.5 .mol \ \times \ 8.315(L.kPa/mol.K)} \\\\T = 2,886.35 \ K\)

When the gas is compressed to half of its volume;

new volume of the gas, V₂ = ¹/₂ V₁

                                             = ¹/₂ x 80L = 40 L

The new pressure, P₂ is calculated as;

\(P_2V_2 = nRT\\\\P_2 = \frac{nRT}{V_2} \\\\P_2 = \frac{0.5 \times 8.315\times 2886.35}{40} \\\\P_2 = 300 \ kPa = 300 \ kN/m^2\)

Therefore, the resulting pressure of the gas when its volume decreases is 300 kN/m².

Answer:

say in English plz I don't understand

Basic leads used in electrical testing have a probe on one end for making the connection with the electrical circuit being tested. This probe is designed to be inserted into a connector or terminal block.

The connector on the end of the lead is usually a male or female banana plug, which is a standard connector used in electronic testing and measurement. Banana plugs are easy to connect and disconnect, and provide a secure and reliable connection between the lead and the test instrument.

In some cases, the connector on the end of the lead may be a different type of connector, such as a BNC connector or an alligator clip. These connectors are also commonly used in electronic testing, and are designed to provide a secure and reliable connection between the lead and the test instrument.

To know more about electrical testing visit:-

https://brainly.com/question/29650231

#SPJ11

An example of a Python application that calculates the total cost of a hospital stay based on the given inputs is given in the image attached.

The above block of code initiates a prompt for the user to input the necessary particulars comprising the duration of their stay in the hospital, medical expenses, surgical expenditures, laboratory costs, and physical therapy bills.

It subsequently employs the given techniques to determine the fundamental fees, additional costs, and overall expenses. In the event that the user inputs data that is not numeric, the try-except block will detect a ValueError and display an error message.

Learn more about application code from

https://brainly.com/question/28992448

#SPJ1

Let's take this step by step.

a. The process capability ratio is given as Cp = 392. However, I believe there may be a misunderstanding or typo in the original question. Process capability ratio typically falls within the range 0-3. The formula for the process capability ratio (Cp) is:

Cp = (USL - LSL) / (6σ)

Where:

- USL is the upper specification limit (in this case, 2.9 ounces)

- LSL is the lower specification limit (in this case, 2.1 ounces)

- σ is the standard deviation (in this case, 0.34 ounces)

Let's recalculate the Cp given these inputs:

Cp = (2.9 - 2.1) / (6 * 0.34) = 0.800

This indicates that Leah's Toys' process is currently capable of producing balls within the tolerance limits about 80% of the time, assuming a normal distribution of weights. There may be a misunderstanding with the provided Cp of 392.

b. If Leah's Toys wants to meet the tolerance limits 99.7% of the time, then they would need to reduce the standard deviation such that the output falls within +/- 3σ (3 standard deviations from the mean). This is also known as achieving a "Six Sigma" level of quality.

We can rearrange the Cp equation to solve for σ:

σ = (USL - LSL) / (6 * Cp)

Assuming a Cp of 1.0 (which represents a process that meets tolerance limits 99.73% of the time under a normal distribution), we find:

σ = (2.9 - 2.1) / (6 * 1.0) = 0.13 ounces

This is the standard deviation Leah's Toys would need to achieve to meet the tolerance limits 99.7% of the time.

c. If Leah's Toys invests in process improvements and lowers the standard deviation to 0.13 ounces, then the new process capability ratio (Cp) would be:

Cp = (2.9 - 2.1) / (6 * 0.13) = 1.026

This means Leah's Toys could achieve Six Sigma quality levels (99.7% of products within specification limits) with this new standard deviation. Six Sigma is often represented by a Cp or Cpk (which takes into account mean shift) of 1.5 or more, but in a perfect process centered between the limits, a Cp of 1.0 represents 99.73% within limits, which aligns with your 99.7% target.

probably in it's chromosomes

Answer:1. Driving under the influence of any drug that makes you drive unsafely is:

a. Permitted if it is prescribed by a doctor

b. Against the law

c. Permitted if it is a diet pill or cold medicine

2. Which fires can you put out with water:

a. Tire fires

b. Gasoline fires

c. Electrical fires

3. How far should a driver look ahead of the vehicle while driving:

a. 9-12 seconds

b. 12-15 seconds

c. 18-21 seconds

4. To prevent shifting, there should be at least one tie-down for ever ____feet of cargo: a. 10

b. 15 c. 18

5. Which of these statements about downshifting is true:

a. When you downshift for a curve, you should do so before you enter the curve

b. When you downshift for a hill, you should do so after you start down the hill

c. When you downshift for a curve, you should do so after you enter the curve

6. How do you test hydraulic brakes for a leak:

a. Move the vehicle slowly and see if it stops when the brake is applied

b. With the vehicle stopped, pump the pedal three time, apply pressure then hold

For five seconds and see it the pedal moves.

c. Step on the brake pedal and accelerator at the same time and see if the vehicle moves

7. For an average driver, driving 55 MPH on dry pavement, it will take about _____ to bring The vehicle to a stop:

a. Twice the length of the vehicle

b. Half the length of a football field

c. The length of a football field

8. You are driving a vehicle with a light load, traffic is moving at 35 MPH in a 55 MPH zone. The safest speed for your vehicle in this situation is most likely:

a. 30 MPH

b. 35 MPH

c. 40 MPH

9. Which of these is a good rule to follow when driving at night:

a. Keep your speed slow enough to stop within the range of your headlights

b. Look directly at oncoming headlights

c. Keep your instrument lights bright

10. A moving vehicle ahead of you has a red triangle with an orange center on the rear. What does this mean?

a. The vehicle is hauling hazardous materials

b. It may be a slow-moving vehicle

c. It may be oversized

11. You wish to turn right form a two lane two way street to make the turn. Which of these Drawings show how the turn should be made.

12. You are driving a heavy vehicle and must exit a highway using an offramp that curves downhill:

a. Use the posted speed limit for the offramp

b. Slow down to a safe speed before the turn

c. Wait until you are in the turn before downshifting

13. Which of these statements about using mirrors is true:

a. You should look at a mirror for several seconds at a time

b. There are “blind spots” that your mirror cannot show you

c. A lane change requires you to look at the mirrors twice

14. You must park on the side of a level, straight, two-lane road. Where should you place the three reflective triangles?

a. one within 10 feet of the rear of the vehicle, one about 100 feet to the rear and one about 200 feet to the rear.

b. One with 10 feet of the rear of the vehicle, one about 100 feet to the rear and one about 100 feet from the front of the vehicle

c. One about 50 feet from the rear of the vehicle, one about 100 feet to the rear and one about 100 feet from the front of the vehicle

15. Your vehicle is in a traffic emergency and may collide with another vehicle if you do not take action. Which of these is a good rule to remember at such a time?

a. Stopping is always the safest action in a traffic emergency

b. Heavy vehicles can almost always turn more quickly than they can stop

c. Leaving the road is always more risky than hitting another vehicle

16. The most important reason for being alert to hazards is:

a. Law enforcement personnel can be called

b. You will have time to plan your escape if the hazard becomes an emergency

c. You can help impaired drivers

17. You are traveling down a long, steep hill. Your brakes begin to fade and then fail. What should you do?

a. Downshift

b. Pump the brake pedal

c. Look for an escape ramp or escape route

18. The most common cause of serious vehicle skids is:

a. Driving too fast for road conditions

b. Poorly adjusted brakes

c. Bad tires

19. To avoid a crash, you had to drive onto the right shoulder. You are now driving at 40 MPH on the shoulder. How should you move back onto the pavement?

a. If clear, come to a complete stop before steering back onto the pavement

b. Brake had to slow the vehicle, then steer sharply onto the pavement

c. Keep moving at the present speed and steer very gently back onto the pavement

20. If

a. Slide sideways and spin out

b. Go straight ahead but will turn if you turn the steering wheel

c. Go straight ahead even if the steering wheel is turned

You can read about it here https://www.cornellcollege.edu/information-technology/policies/technology-policies/limitations-of-laptops.shtml

The rate of heat transfer through the wall is 1566.67 W. We cannot ignore the steel bars between the plates in heat transfer analysis, even though they occupy only 1 percent of the heat transfer surface area.

The rate of heat transfer through a wall depends on the material properties, dimensions, and temperature difference across it. In this case, we have a 4-m-high and 6-m-long wall consisting of two large 2-cm-thick steel plates separated by 1-cm-thick and 20-cm wide steel bars placed 99 cm apart. The remaining space between the plates is filled with fiberglass insulation.

The temperature difference between the inner and outer surfaces of the wall is 22°C. Using the thermal resistance method, we can determine the rate of heat transfer through the wall. However, we cannot ignore the steel bars between the plates in heat transfer analysis, even though they occupy only 1 percent of the heat transfer surface area. The steel bars provide a parallel heat transfer path, reducing the overall thermal resistance of the wall.

Learn more about Heat transfer

brainly.com/question/13433948

#SPJ11

The answer is C) rating locally sourced foods. While consuming locally sourced foods can have environmental benefits, it is not a direct action to mitigate against climate change. The other options listed - using energy efficient light bulbs, planting trees to remove CO2, driving a vehicle with high fuel economy, and improving regional land use practices - are all examples of actions individuals can take to help reduce their carbon footprint and mitigate against climate change.

Answer:what's the question

Explanation:

When a closed path is broken, it is called a(n): c) open circuit.

An open circuit is a type of electrical circuit that does not have a closed path for the electrical current to flow through. This means that the circuit is "broken" or "open" and the electrical current cannot flow from the power source to the load. As a result, the electrical devices connected to the circuit will not work. This is different from a short circuit, which occurs when the electrical current bypasses the load and flows directly back to the power source, causing an overload and potentially damaging the circuit.

Here you can learn more about the open circuit in the link: https://brainly.com/question/30602217

#SPJ11

The person's height will be the dependent variable because it changes and varies depending on the person's age. For the independent variable, create an x-axis. In a scatter plot, the independent variable is often positioned near the bottom. The "x-axis" refers to this.

Spread Plot The graphs that show the association between two variables in a data set are called scatter plots. Either a Cartesian system or a two-dimensional plane can be used to display data points.

The independent variable or attribute is represented by the X-axis, and the dependent variable is plotted using the Y-axis.

Therefore, geom_jitter() function creates a scatter plot and then adds a small amount of random noise to each point in the plot to make the points easier to find.

Learn more about scatter plot here:

https://brainly.com/question/29231735

#SPJ4

Answer:

b. A view of a building seen from one side, a flat representation of one façade. This is the most common view used to describe the external appearance of a building.

Explanation:

An elevation is a three-dimensional, orthographic, architectural projection that reveals just a side of the building. It is represented with diagrams and shadows are used to create the effect of a three-dimensional image.

It reveals the position of the building from ground-depth and only the outer parts of the structure are illustrated. Elevations, building plans, and section drawings are always drawn together by the architects.

Answer:

Weight Percentage of Ash = 3.4

Explanation:

Given - Coal containing 21% ash is completely combusted, and the ash is 100% removed in a water contact scrubber. If 10,000 kg of coal is burned per hour with a scrubber flow rate of 1.0 m3/min.

To find - the weight percentage of the ash in the water/ash stream leaving the scrubber is most nearly ?

Solution -

Given that,

Coal Burned Rate = 10,000 kg/hr

                              = \(\frac{10,000}{60 min} * 1 hr *\frac{kg}{hr}\)

                              = 166.6666 kg/min

⇒Coal Burned Rate = 166.6666 kg/min

Now,

Given that,

Ash content in coal = 21 %

⇒Ash in (coal that burned) = 166.6666 × \(\frac{21}{100}\) kg/min

                                             = 34.9999 ≈ 35 kg/min

⇒Ash in (coal that burned) = 35 kg/min

Now,

We know,

Density of water = 1000 kg/m³

Now,

Water flow Rate = \(1\frac{m^{3} }{min} * density\)

                           = 1000 kg/min

⇒Water flow Rate = 1000 kg/min

Now,

Total Mass flow Rate of (Water + Ash stream) = ( 1000 + 35) kg/min

                                                                           = 1035 kg/min

⇒Total Mass flow Rate of (Water + Ash stream) = 1035 kg/min

So,

Weight Percentage of Ash = (Weight of Ash ÷ Total weight of Stream) × 100

                                            = (35 ÷ 1035) × 100

                                            = 3.38 ≈ 3.4

∴ we get

Weight Percentage of Ash = 3.4

Answer:

1123.6 pounds/ square inch.

Explanation:

Fluid pressure is the ratio of force or weight applied by the fluid per unit area.

i.e Fluid pressure = \(\frac{weight}{area}\)

The maximum load of the jack is obtained at its maximum capacity = 5000 pounds

Area of the large piston on the jack = 4.45 square inches

Thus,

Fluid pressure = \(\frac{5000}{4.45}\)

                        = 1123.5955

Fluid pressure = 1123.6 pounds/ square inch

Thu, the fluid pressure in the jack at maximum load is 1123.6 pounds/ square inch.

Travel and history go hand - in - hand. History provides us with a broad grasp of a past, whereas travel links the past to the present and enables us to comprehend its importance both now and in the future.

Use in a casual way to express that something is obvious to you and actually not shocking given the circumstances. Everybody gets frustrated and disappointed when things go bad. People were naturally interested in such arrivals and departures. Naturally, he had already been horrified and furious.

All non-human produced objects on the planet, such as all animals, vegetation, as well as other living creatures, and all natural phenomena, are collectively referred to as nature. The

To know more about naturally visit:

https://brainly.com/question/20378345

#SPJ4

Answer:

Explanation:

From the given information:

The BOD of the wastewater can be determined by using the formula:

\(BOD _5 = \dfrac{DO_i-DO_f}{\dfrac{V_s}{V_b}}\)

where;

\(BOD _5 =\)biochemical oxygen demand = ???

\(DO_i=\) initial dissolved oxygen = 9 mg/L

\(DO_f=\) final dissolved oxygen = 4 mg/L

\(V_b =\) sample of the bottle, which is normally 300 mL

\(V_s\) = sample volume = 30 mL

\(BOD _5 = \dfrac{9-4}{\dfrac{30}{300}}\)

\(BOD _5 = \dfrac{5}{\dfrac{1}{10}}\)

\(BOD _5 = 5\times{\dfrac{10}{1}}\)

\(\mathbf{BOD _5 = 50 \ mg/L}\)

The ultimate Carbonaceous BOD is estimated from the formula:

\(y_t = L_o-L_t \\ \\ y_t = L_o-L_oe^{-kt} \\ \\ y_t = L_o (1-e^{-kt})\)

Making \(L_o\) the subject, we have:

\(L_o = \dfrac{y_t}{(1-e^{-kt}} \\ \\ L_o = \dfrac{50}{1 - e^{-0.25*5}}\)

\(L_o\) = 70 mg/L

c) The BOD left over after five days = \(L_oe^{-kt}\)

= \(70 \times e^{-0.25 *5}\)

= 20 mg/L

d) The reaction constant rate is estimated as follows:

Recall that:

\(\mathbf{BOD _5 = 50 \ mg/L}\)

Since DO measure 2 mg/L;

After 30 days, \(BOD_{30} = (9-2) \times 10 = 70 \ mg/L\)

Therefore, the reaction rate constant is:

\(\dfrac{50 \ mg/L}{70 \ mg/L} =\dfrac{1-e^{-k*5}}{1-e^{-k*30}} \\ \\ 50 (1-e^{-k*30}) = 70 (1-e^{-k*5}) \\ \\ K = 0.25 /day\)

The peak power of the radar system is 200 kW, and the duty cycle is 0.001 or 0.1%.

To calculate the peak power and duty cycle of a radar system with the given parameters, we can use the following formulas:

Peak Power (P_peak): The peak power is calculated using the average power (P_avg) and the duty cycle (D). The formula is:

P_peak = P_avg / D

Duty Cycle (D): The duty cycle is the ratio of the pulse width (t_pw) to the pulse repetition period (T_prp). The formula is:

D = t_pw / T_prp

Given the values:

Average transmitter power (P_avg) = 200 W

Pulse width (t_pw) = 1 µs

Pulse repetition frequency (PRF) = 1000 Hz

We can calculate the peak power and duty cycle as follows:

Calculate the pulse repetition period (T_prp):

T_prp = 1 / PRF = 1 / 1000 = 0.001 s

Calculate the duty cycle (D):

D = t_pw / T_prp = (1 µs) / (0.001 s) = 0.001

Calculate the peak power (P_peak):

P_peak = P_avg / D = 200 W / 0.001 = 200,000 W = 200 kW

Therefore, the peak power of the radar system is 200 kW, and the duty cycle is 0.001 or 0.1%.

Learn more about radar system here

https://brainly.com/question/17192382

#SPJ11

It is subjective to determine the "most happy" and "most sad" song as it varies from person to person. Different songs can evoke different emotions in different people.

However, some songs that are commonly considered to be happy include "Happy" by Pharrell Williams, "Don't Stop Believin'" by Journey, and "I Will Always Love You" by Whitney Houston. Some songs that are commonly considered to be sad include "Everybody Hurts" by R.E.M., "Tears in Heaven" by Eric Clapton, and "My Heart Will Go On" by Celine Dion.

The emotions that a song evokes in a listener are subjective, meaning that they can vary from person to person. For example, a song that one person finds to be happy and uplifting, another person may find to be sad or melancholy. This is because emotions are personal experiences that are shaped by a person's individual life experiences, beliefs, and attitudes.

Therefore, Regarding the songs mentioned, "Happy" by Pharrell Williams, "Don't Stop Believin'" by Journey, and "I Will Always Love You" by Whitney Houston are considered happy songs because they have upbeat tempos, positive lyrics, and a cheerful sound that can make people feel good.

Learn more about   happy song from

https://brainly.com/question/8278749

#SPJ1

Answer:

Explanation:

Like requested the following function is written in JavaScript and prompts the user for a total amount of Kenyan Currency that needs to be converted. It then places that value in a variable and divides it by 115 Ksh so that it gives us the USD value of that currency. Then that value is returned. The function can be attached to any button but it must be done manually when creating the button's onClick method.

function convertCurrency() {

 var KenyanAmount = prompt("Please enter the amount of Kenyan you want to convert.");

 var usdValue = "$" + (KenyanAmount / 115);

 return usdValue;

}

The program is a sequential program, and does not require loops and conditional statements

The function in JavaScript where comments are used to explain each line is as follows:

//This defines the function

function convertCurrency() {

//This gets input for the amount to convert

var Amount = prompt("Kenyan Shillings: ");

//This converts the Kenyan Shillings to US Dollars

var usdValue = KenyanAmount / 115;

//This returns the converted amount to the main method

return usdValue;

}

Read more about JavaScript at:

https://brainly.com/question/9856013

False. The SRY gene is not an example of a homeotic gene. It is a sex-determining gene.

True. A replicated chromosome is made up of two sister chromatids.

True. Histones are proteins that wrap around DNA strands to form nucleosomes.

False. mRNA (messenger RNA) is different from DNA in both its composition and function.

True. Introns are non-coding regions of DNA that are removed during mRNA processing before translation.

False. Monozygotic twins are formed from a single fertilized egg, which splits into two embryos.

False. Epigenetics is the study of heritable changes in gene expression that do not involve changes to the underlying DNA sequence.

False. While recombinant DNA technology has provided significant advancements in treating genetic diseases, it does not guarantee a complete cure.

False. A substitution mutation does not cause a frame shift. It involves the replacement of one nucleotide with another.

True. Down's Syndrome is caused by aneuploidy, specifically an extra copy of chromosome 21.

Learn more about homeotic gene here

https://brainly.com/question/31535854

#SPJ11

Providing data and instructions to the computer is considered an input operation. On the other hand, receiving results from the computer is considered an output operation.

What is Input and Output operation?

Input is the process of feeding information into a computer or other electronic device.

In this case, the data and instructions are provided to the computer by a user, program, or device using input devices such as a keyboard, mouse, microphone, or scanner.

While output is just opposite to it, receiving results from the computer is considered an output operation.

Output is the process of displaying or transmitting the processed information to a user or another device.

In this case, the computer provides the results of processing the input data and instructions through output devices such as a monitor, printer, or speaker.

To know more about keyboard, visit: https://brainly.com/question/30545170

#SPJ1

The number of receptacles that are needed for all of these kitchen areas are: C. Four.

Receptacles can be defined as types of sockets or series of outlets (openings) that provides a path where current can be taken in a wiring system, so as to run electrical appliances in buildings.

Based on the information provided, the number of receptacles that are needed for all of these kitchen areas are four because one would be used in each area.

Read more on receptacles here: https://brainly.com/question/23839796

#SPJ1