Question 6 (coder) Refer to page six of the Coders and Tracers for sample runs. You are to write the code for the void method showPeopleStuff, where the method receives two String values representing the names of two different people and two int values representing their respective ages. The method is to show a line of text about the first person and their age, a line of text about the second person and their age, and a final line of text about the age difference between the two.
Note that the name of the older person is displayed first for this line. If the two people are the same age, the method should display both names and this information. Two sample runs for this method (make the display exactly resemble the text given in the sample runs) are provided on page six of the Tracers and Coders Sheets, where we've dealt with each age possibility. Question 6 Sample Calls and Runs Call: show PeopleStuff("Johnny", "Joe", 18, 22);
Display: Johnny is 18 years old Joe is 22 years old Joe is 4 years older than Johnny. Call: show PeopleStuff("Jack", "Jill", 12, 9);
Display: Jack is 12 years old Jill is 9 years old. Jack is 3 years old than Jill. Call: show PeopleStuff("Tweedledee", "Tweedledum", 18, 18); Display: Tweedledee and Tweedledum are both 18 year old

For the given synchronous generator:

The armature current would be 246.636 ∠ -37.9° ampere.

The internal voltage Ea is 422.72 ∠20.21° volts.

The power angle is 20.21°.

The shaft tourqe is 444.83 N-m.

a) I  = Load/ V ∠ - \(cos^{-1} (PF)\)

      = 54.7 X 10^3 / 220 ∠- \(cos^{-1} (0.789)\)

     = 246.636 ∠ -37.9° ampere.

b)   Ea = V ∠0° + I ∠Ф (R +jX)

          = 220 +  246.636 ∠ -37.9(0.2 + j0.9)

          = 422.72 ∠20.21° volts

c) Power angle from genrated voltage angle is = 20.21°

d) Synchronous speed , N = 120 F/P = 120 x 60 / 6 = 1200 spm

Shaft Power , P = Load x PF +  I^2 R

                         = 54.7 x 0.789 + ((248.363)^2 x 0.2/1000) = 55.522 Kw

Shaft torque = 60P /2πN = 444.83 N-m

To know more about synchronous generator refer:

https://brainly.com/question/15008430

#SPJ4

Tech A is correct, when boring a cylinder, it should be bored to the final cylinder size.

What is cylinder boring?

A specific machine and tools are used in the process known as cylinder boring, which involves spinning a unique carbide tool within the cylinder to remove the damaged material from the walls.

Therefore, when boring a cylinder, it should be bored to the final cylinder size. Machines are used to widen as well as taper the cylinders when boring an engine. Boring an engine can improve performance by changing the engine's displacement, which increases horsepower and torque. Engine displacement is the collective volume of all the pistons swept inside the engine's cylinders.

You can learn more about cylinder boring from the given link
https://brainly.com/question/27238084
#SPJ4

The correct answer choice for implementing the enqueue() method in a queue with a linked list in Java is append().

When implementing a queue using a linked list, the enqueue operation adds an element to the end of the list, as it follows the FIFO (First-In-First-Out) principle. The append() method in the linked list class would typically be used to add a new element at the end of the list, making it the most appropriate choice for the enqueue operation.

The other answer choices are not directly related to the enqueue operation in a queue implementation using a linked list:

removeafter() is used to remove an element after a specified node, which is not necessary for the enqueue operation.

prepend() is used to add an element at the beginning of the list, which does not follow the FIFO principle of a queue.

insertafter() is used to insert an element after a specified node, but it is not typically used in the enqueue operation of a queue.

Learn more about Java here:

https://brainly.com/question/12978370

#SPJ11

The sections of a disaster recovery plan related to computer systems should include information on identifying potential hazards, the assessment of the potential impact of a disruption, contingency planning, testing and revising the plan, and employee training and awareness to ensure they understand their roles in a disaster recovery plan.

disaster recovery plan, computer systems, potential hazards, contingency planning, testing, employee training and awareness. A disaster recovery plan is essential for computer systems because it is important to have a backup plan to maintain productivity in the event of a crisis. The disaster recovery plan should identify potential hazards and assess their potential impact on the system and the business as a whole. It should also include contingency planning, such as data backup and recovery strategies, as well as testing and revising the plan on a regular basis to ensure that it remains effective. Lastly, employee training and awareness are critical components of any disaster recovery plan, as they play an important role in implementing the plan and minimizing disruptions to the business.

A planning framework known as disaster recovery aids in ensuring that a company can withstand a disaster. Data backup, which aids businesses in recovering lost data following an accidental deletion or a cyberattack like ransomware, is one example of a disaster recovery strategy.

Know more about disaster recovery, here:

https://brainly.com/question/29780088

#SPJ11

Answer:

  0°

Explanation:

The resistor voltage has the same phase as the circuit current. There is no phase difference.

Answer:

Explanation:

Answer:

The parts of DC motor are as follows -

a) Stator

b) Frame

c) Bearings

d) Windlings /shaft

e) Commutator

f) Brush Assembly

Explanation:

The parts of DC motor are as follows -

a) Stator

b) Frame

c) Bearings

d) Windlings /shaft

e) Commutator

f) Brush Assembly

Answer:

The answer is below

Explanation:

Case hardening is a form of steel hardening that is applied on mild steel with a high temperature of heat.

It results in material forming a hard surface membrane, while the inner layer is soft.

It is mostly used for universal joints, construction cranes, machine tools, etc.

On the other hand, Through hardening is a form of steel hardening in engineering that involves heat treatment of carbon steel.

It increases the hardness and brittleness of the material.

It is often used for axles, blades, nuts and bolts, nails, etc.

\(1.0783*10^{28}(atoms).\)

Since I don't have access to "Appendix A", I'll solve the problem using data from the periodic table.

According to the periodic table, the molar mass of iron is:

55.845g/mole.

\(1(tonne)*1000=1000kg\\1000kg*1000=1000000g=10^6g\)

\(55.845g\) ----------- \(1 mole\)

\(10^6g\) ----------- \(x\)

\(x=\frac{10^6*1}{55.845}=17906.7061(moles)\)

Considering that there are, approximately, \(6.022*10^{23}\) atoms in a mole of any element, apply another rule of 3.

1 mole --------------------- \(6.022*10^{23}(atoms)\)

\(17906.7061(moles)\) --------------------- x

\(x=\frac{17906.7061*6.022*10^{23}}{1}=1.0783*10^{28}\).

Answer:

Automation generally means “a process performed without human assistance”, while autonomy implies “satisfactory performance under significant uncertainties in the environment and the ability to compensate for system failures without external intervention [emphasis mine].”

Explanation:

Answer:

True

Explanation:

Since liquid can be considered as incompressible, the volume flow rates into and out of a steady flow device will remain constant. True, For a steady, incompressible flow, since the density is constant, it implies that the total volumetric flow rates entering and leaving a control volume are the same.

The letter "k" in the word "quartile" does not indicate that it is Greek. It is more likely influenced by the Latin origin of the word.

In the English language, the letter "k" is not typically associated with Greek words. Greek words usually use the Greek alphabet, which does not include the letter "k" but has a similar-sounding letter "κ" (kappa). The word "quartile" itself is derived from the Latin word "quartus," meaning "fourth." It is used in statistics to divide a distribution into four equal parts.

Greek words, on the other hand, often use letters like alpha (α), beta (β), gamma (γ), and so on. These letters are distinct from the letter "k." For example, the Greek word for "fourth" is "τέταρτος" (tétartos), which does not have a "k" sound.

Therefore, in the context of the word "quartile," the letter "k" does not indicate that it is Greek. It is more likely influenced by the Latin origin of the word.

Learn more about quartile here

https://brainly.com/question/31922534

#SPJ11

a) The Gantt chart view for the project is shown below. The finish date is April 6, 2023. The critical path is A-B-E-F-H-I-K-L and its duration is 25 days.

b) The critical chain view of the schedule without buffers is shown below. The critical chain is A-C-D-E-G-H-I-J-K-L and its duration is 18 days. Adding the project buffer of 25% of the critical chain duration (4.5 days) and the feeding buffers, the end date is April 10, 2023.

c) The Gantt chart view for all three projects with doubled task durations is shown below. The finish date is May 13, 2023.

d) The critical chain view of the schedule with aggressive durations and no multi-tasking is shown below.

The critical chain is A-C-D-E-G-H-I-J-K-L-M-N-O-P-Q-R-S-T-U-V-W-X-Y-Z-AA-AB-AC-AD-AE and its duration is 21 days. Adding the project buffer of 25% of the critical chain duration (5.25 days) and the feeding buffers, the end date is May 23, 2023.

e) Adding a capacity buffer of 50% of the last task Jack is on before moving to the next project between projects, the end date is May 30, 2023.

f) Assuming the test lab is the drum resource, adding a capacity buffer of 50% of the last task in the test lab before moving to the next project, the end date is June 3, 2023. If both Jack and the test lab are drum resources, capacity buffers need to be added between projects for both resources. The overall end date will depend on the size of the buffers added.

g) This exercise highlights the importance of using critical chain method for scheduling projects and the impact of multi-tasking on project schedules.

Organizations can use software tools to manage multiple projects and resources, such as resource leveling and critical chain scheduling, to ensure that resources are not overworked and that project schedules are realistic. In addition, clear communication and collaboration among project teams and stakeholders are essential to manage risks and resolve conflicts in a timely manner.

Read more about scheduling projects here:

https://brainly.com/question/12310554

#SPJ1

Answer:

The answer is "F".

Hope this helped!

Answer:

The answer is "+9.05 kw"

Explanation:

In the given question some information is missing which can be given in the following attachment.

The solution to this question can be defined as follows:

let assume that flow is from 1 to 2 then

Q= 1kw

m=0.1 kg/s

From the steady flow energy equation is:

\(m\{n_1+ \frac{v^2_1}{z}+ gz_1 \}+Q= m \{h_2+ \frac{v^2_2}{2}+ gz_2\}+w\\\\\ change \ energy\\\\0.1[1.005 \times 800]-1= 0.01[1.005\times 700]+w\\\\w= +9.05 \ kw\\\\\)

If the sign of the work performed is positive, it means the work is done on the surrounding so, that the expected direction of the flow is right.

Answer:

Explanation:

, integrated circuit packaging is the final stage of semiconductor device fabrication, in which the block of semiconductor material is encapsulated in a supporting case that prevents physical damage and corrosion.

The f(4) using is found using newton's interpolating polynomials of order 4.

function y=CL10_Exercise(part)

%% Input

% part: string for part a,b,c,d

%

%% Output

% y value of the underlying function at x=4

%

%% Write your code here

X=[1,2,3,5,6];

Y=[15,8,5.5,30,52];

x=4;

y=1;

switch part

case 'a'

%% Newton interpolation (Order 4)

a=X;

b=Y;

%x=input('Enter x: ');

[m,n]=size(a);

fx=0;

for i=1:n

%_____________Calculating Dividing Difference_____________________

s=0;

for j=1:i

p=1;

for k=1:i %Denominator part product

if(k~=j)

p=p*(a(j)-a(k));

end

end

s=s+b(j)/p; %summation f(x)/product

end

%_________________________________________________________________

p=1;

for j=1:i-1 %coefficient part of f[...]

p=p.*(x-a(j));

end

fx=fx+s.*p; %Polynomial!

end

y=fx;

case 'b'

%% not-a-knot spline

case 'c'

%% clamped spline

case 'd'

%% Hermite spline

end

end

Hence, the f(4) using is found using newton's interpolating polynomials of order 4.

To learn more about interpolation click here:

brainly.com/question/18768845

#SPJ4

Answer:

Texas because it is not hardware it is a country name

Once the interior design project is complete, the deliverables must be accepted properly. Following explains how completed interior design project deliverables shall be accepted.

Acknowledge the designers and any additional workers who assisted in the project. It should also describe what was accomplished and what the final outcome should look like. Explain in detail what was done and if everything meets your needs and specifications. During the review, ask to see samples of the products that were used to complete the design. This is your chance to express any concerns you may have. Finally, after a thorough inspection, once you're satisfied with the final product, you can accept the completed interior design project. To do so, you may have to sign off on the work in order to provide confirmation that the job has been completed to your satisfaction. For instance, in the case of an office space, once the project is finished, you can acknowledge the designers who worked on the project. During the inspection, ask for a demonstration of any furniture items or equipment that were used. You may also want to make certain that everything is in good working order. Finally, once everything has been checked and you're happy with the final product, you can sign off on the work to accept the completed interior design project.

To learn more about interior design, visit:

https://brainly.com/question/31865896

#SPJ11

Cloud computing technologies  are a key to supporting the data mining environment.

Cloud computing technologies are a key to supporting the data mining environment.

Cloud computing provides scalable and flexible infrastructure that allows organizations to store and process large volumes of data, enabling efficient data mining operations.

Additionally, cloud-based services offer cost-effective solutions by eliminating the need for extensive on-premises hardware and software investments.

The cloud also enables collaboration and data sharing among different stakeholders, enhancing the overall effectiveness of data mining initiatives.

Learn more about Cloud computing

brainly.com/question/31501671

#SPJ11

Answer:wat

Explanation:

Answer:

B) Attenuation

Explanation:

Attenuation can be regarded as the loss of signal strength which could be as a result of both external and internal factors. This loss of signal strength could occur in networking cables as well as other connections. Attenuation is a loss in energy, because as signal travels, its strength decreases as a a result of distance it covers, this loss of energy is due to the signal trying to overcome the resistance at the medium. One of the main the causes of attenuation is When there is Extra noise on available networks, networks such as electrical current as well as radio waves. It should be noted that attenuation is Signal loss which is the reduction of a signal that occurs in a medium as a function of the physical length of the channel.

Singnal attenuation can taken care of by using lower loss materials with high cost, instead of making of PCB routing length reduction. Amplifiers can also be engaged in amplifying attenuated signal to get back the original signal, this will compensate the loss.

Attenuation can be measured in decibels(dB), this gives the measurement of relative strengths of one signal at two different point or measurement of two signals.

False. An Agent can perceive its own actions, but not always its effects

An agent can perceive both its own actions and their effects. The perception of the effects of actions is crucial for an agent to assess the outcome of its actions and make informed decisions in pursuit of its goals.

Know more about An Agent here:

https://brainly.com/question/28325983

#SPJ11

Answer:

A, D, F

Explanation:

took on edge.

Answer:

The answer is A,D,F

A:observing and interpreting readings on gauges, meters, and charts

D:testing boiler water quality or arranging for testing

F:operating or tending stationary engines, boilers, and auxiliary equipment

Explanation:

I got all right on edge.

Plastic and composite fenders require different bolts because fenders combine energy absorption and deflection qualities.

Plastics are defined as a class of substances, either artificial or natural, that can be molded while still soft and subsequently hardened to maintain the desired shape. The thickness grade for plastic sheeting most frequently used is 6 mil. This is 0.006 inch, or six thousandths of an inch.

Fasteners are regarded as tools that are used in a variety of applications to form a solid junction. While some fasteners are permanently linked, the majority allow joints to be broken apart or withdrawn without harming the pieces that were joined.

Thus, plastic and composite fenders require different bolts because fenders combine energy absorption and deflection qualities.

To learn more about plastic, refer to the link below:

https://brainly.com/question/28580291

#SPJ1

Answer:

Where cables and nonmetallic raceways are installed parallel to framing members, the nearest outside surface of the cable or raceway shall be at least 1 1/4 inches from the nearest edge of the framing member where nails or screws are likely to penetrate. This is according to the National Electrical Code (NEC).

✅C) Avoid having to use a net ✅

IamSugarBee