In a certain locality, the probability that it rains during the day given that the sky is cloudy in the morning is 0.7, while the probability that is does not rain given that the sky is not cloudy in the morning is 0.3. Two-thirds of the days in the year begin as cloudy, and one-third begin as sunny. Find: (a) The probabilities of rain and no rain irrespective of whether or not the sky is cloudy in the morning. (b) The probability that if it does not rain during the day, the sky is cloudy in the morning. (c) The probability that if it rains during the day, the sky is not cloudy in the morning.

Answer:

A Voltage regulator

That force which is generated to cause current to flow in an electrical circuit. It is also referred to as electromotive force or electrical potential. Voltage is measured in volts. VOLTAGE REGULATOR - A device that controls the strength of a magnetic field produced by a generator or alternator

Answer:

Explanation:

The 7 Habits of Highly Effective People, is a book written and first published in 1989. It is a business and self-help book that was written by Stephen Covey. The seven habits include

Being proactive

Starting anything with the end in mind

First things first

Always thinking towards a win-win situation

Seeking initially to understand, then going on to want to be understood

Synergize, and lastly

Growing

Answer:

D. The damage it causes is irreversible

Explanation:

Silicosis is a long term lung disease caused by crystalline silica dust inhalation. There is no cure, and once the damage is done it cannot be reversed.

------------------

Like stated above, the damage is irreversible. Option A is incorrect.

Construction workers are constantly moving to build whatever they're working on. The disease will make it hard to breathe and will have a heavy effect on their lungs, preventing them from properly doing their jobs. Additionally, it's possible to get the disease from this job since you're constantly inhaling dust particles.

Silicosis does major damage to the lungs. The dust particles are attacked by the immune system which causes inflammation and eventually leads to areas of hardened and scarred lung tissue.

Thus, the best option is D.

hope this helps :)

Answer:

final temperature = 26.5°

Explanation:

Initial volume of water is 1 x 1 x 1 = 1 \(m^{3}\)

Initial temperature of water = 20° C

Density of water = 1000 kg/\(m^{3}\)

volume of copper block = 0.46 x 0.46 x 0.46 = 0.097 \(m^{3}\)

Initial temperature of copper block = 100° C

Density of copper = 8960 kg/\(m^{3}\)

Final volume of water = 1 - 0.097 = 0.903 \(m^{3}\)

Assumptions:

mass of water remaining in the tank will be density x volume = 1000 x 0.903 = 903 kg

specific heat capacity of water c = 4186 J/K-kg

heat content of water left Hw = mcT = 903 x 4186 x 20 = 75.59 Mega-joules

mass of copper will be density x volume = 8960 x 0.097 = 869.12 kg

specific heat capacity of copper is 385 J/K-kg

heat content of copper Hc = mcT = 869.12 x 385 x 100 = 33.46 Mega-joules

total heat in the system = 75.59 + 33.46 = 109.05 Mega-joules

this heat will be distributed in the entire system

heat energy of water within the system = mcT

where T is the final temperature

= 903 x 4186 x T = 3779958T

for copper, heat will be

mcT = 869.12 x 385 = 334611.2T

these component heats will sum up to the final heat of the system, i.e

3779958T + 334611.2T = 109.05 x \(10^{6}\)

4114569.2T = 109.05 x \(10^{6}\)

final temperature T = (109.05 x \(10^{6}\))/4114569.2 = 26.5°

Since t's value is unknown, we are unable to determine x with precision. However, the value of x can be precisely computed with a big enough amount of t (i.e., enough time for the diffusion to achieve a steady-state condition).

As a nitrogen  atmospheres function at position, x, into the sheet, the concentration profile of nitrogen in steel can be modelled as follows:

C(x) is equal to C0 - (C0 - C) * erf(x / sqrt(D * t))

where:

C0 = 2 kg/m^3

C∞ = 0.5 kg/m^3

D = 1.2 x 10^(-10) m^2/s erf = the error function t = time

In order for C(x) to equal 0.5 kg/m3, we need to determine the depth, or x, within the sheet. By rearranging the equation, we may find the value of x:

erf^(-1) = ((C0 - C) / (C0 - C)) * sqrt(D * t) * x = 2 * sqrt(D * t)

When we enter the values from the problem, we get:

x = 2 * sqrt(1.2 x 10^-10 m^2/s*t) * erf-1((2 kg/m^3 - 0.5 kg/m^3) / (2 kg/m^3 - 0.5 kg/m^3)).

Learn more about atmospheres Visit: brainly.com/question/219386

#SPJ4

Answer:

building a bridge

Explanation:

you would have to sketch ideas to see what the bridge would look like and you need to know what to add to it to enhance the percentage of it working. if you sketch it you would have an idea of the process also

Building a bridge is an occasion in which an explanatory sketch would be used.

Sketches of explanations are created to demonstrate form, structure, and function. They accurately and objectively communicate a design, placing more emphasis on explanation than pitch. Outside of the design team, explanation sketches must be understandable.

Exploratory sketches, often referred to as thinking drawings, are a type of personal communication that frequently serve as the starting point for brand-new product concepts.

During a brainstorming session or for personal usage in a design notebook, these quick sketches are meant to quickly capture ideas. Exploratory research aims to study the important aspects of a topic that hasn't gotten much attention.

Thus, it is Building a bridge.

For more details about explanatory sketch, click here:

https://brainly.com/question/13673165

#SPJ2

Answer:

take your foot off of the accelorator. do not brake and let the vehicle coast until it stops. put on your hazard lights as well

Explanation:

The code that assigns the value True to a variable called found if the target exists in L and False otherwise is:

found = target in L

From the question, we have the following parameters that can be used in our computation:

Initial variables = L and target

Where

L = List and target = integer

The condition is such that:

There are several ways to do this.

One of them is the following code segment

found = target in L

Another way is

if target in L:

   found  = True

else

   found  = False

Another solution is

found  = False

if target in L:

   found  = True

Read more about code segments at

https://brainly.com/question/20734416

#SPJ1

Answer:true

Explanation:

Using the knowledge in computational language in C++ it is possible to write the code being write a class having two private variables

#include <iostream>

using namespace std;

class Rectangle { /*create a class named Rectangle*/

  private:

  float l,b; /*this class has two private variables l and b*/

  public:

  float getArea(float l, float b) /*this class has one member-function getArea which returns the area of the rectangle*/

  {

   return l*b; /*return the area of the rectangle*/

  }

};

int main () { /*the main function to check the working of our Rectangle class*/

 float l,b;

 Rectangle r1; /*create an object r1 of Rectangle class*/

 cout<<"Enter the length of the rectangle: ";

 cin>>l; /*input the length of the rectangle from the user*/

 cout<<"Enter the breadth of the rectangle: ";

 cin>>b; /*input the breadth of the rectangle from the user*/

 cout <<"Area of the rectangle is: "<< r1.getArea(l,b)<<" square units."; /*find the area of the rectangle using the member function of the class*/

 return 0;

}

See more about C++ at brainly.com/question/19705654

#SPJ1

Answer:

You'd need to know things like the weight of the car, the spring constant of the suspension springs.

Explanation:

Driving over the curb slowly does not have much of an "impact" because of the small potential energy it has but to find the force that results from going over the curb at a much higher speed, you would need to know the weight of the car since it directly impact the force that it applies. You also would need to know about the car's suspension, the spring material, how stiff the springs are and their spring constant to calculate the force they absorb.

I hope this answer helps.

When crossing another boat's wake, the crossing vessel should cross at a right angle or as close to it as possible.

Crossing at a right angle, or close to it, minimizes the impact of the wake on both vessels and reduces the risk of a collision. Crossing at an oblique angle can increase the risk of the crossing vessel being swamped or capsized by the wake.

Additionally, crossing at a right angle allows both vessels to maintain their course and speed, minimizing disruption to other vessels in the area. It is important to always be aware of other vessels and their wakes, and to adjust course and speed accordingly to ensure safe navigation.

For more questions like Crossing click the link below:

https://brainly.com/question/4645234

#SPJ11

Prepare a strategy for handling a hazardous material occurrence. Damage to hazardous material containers should be noted. Identify any dangerous substances. Determine the size of a threatened region.

When there is an emergency involving potentially harmful substances, a Hazmat Technician responds. You determine how to properly dispose of the hazardous materials as a Hazmat Technician by identifying them. Asbestos, lead, mercury, mould, radioactive waste, and nuclear waste are a few examples of materials you might frequently deal.

In order to support business operations and provide high-quality outputs, a materials technician is in charge of examining, testing, and guaranteeing the stability and efficiency of the tools and materials needed for production operations and manufacturing processes.

To know more about hazardous material visit:-

https://brainly.com/question/29630735

#SPJ1

There are 264 different blocks of ciphertext that can be used to encrypt a given 64-bit block of plaintext. Just 256 different DES keys are conceivable.

The 64-bit, 128-bit, and 192-bit DES keys employ the DES algorithm to carry out the cryptographic operation. A single-length key is the name given to a 64-bit key. A double-length key is the name given to a 128-bit key. 192 bits make up triple-length keys.

The majority of contemporary encryption services utilise keys with a minimum bit size of 128 and a maximum of 256. To put that into perspective, a 256-bit key would need to be cracked using a brute force assault that would check all 2256 potential combinations. even an extremely vulnerable 64-bit key

To know more about cryptographic operation visit:

https://brainly.com/question/3026658

#SPJ1

Answer:

sorry di ko alam

Explanation:

The controller PB is 0.22, the range of the controller pressure is between 3 to 13 psig, the controller setpoint is at 72°F, and the output pressure at that temperature is 3 psig while the controller output pressure at 76°F is 6 psig

A controller system is a type of feedback system used to regulate the performance of an output device by comparing the output to a desired set point. It uses the difference between the two values (error) to continuously adjust a control input to reduce the error. In simple terms, the controller system monitors, adjusts, and regulates the operations of the output device to achieve a desired result. Common examples of controllers include thermostats, cruise control systems, and PID controllers.

(a) Controller PB setting when remote sensors with spans of 50°F, 150°F, and 200°F are used:

This can be calculated as;

PB = (72°F - 50°F) / (200°F - 50°F) = 0.22

(b) Controller pressure range:

The range of the controller pressure is  3 - 13 psig

(c) Controller setpoint:

The controller set point is 72°F

(d)

The controller output pressure when T = 72°F while using the same sensors as in (a) is 3 psig

(e)

The controller output pressure at T = 76°F is  6.6 psig

(f) To predict the output pressure of the controller when T = 80°F with three remote sensors having spans of 50°F, 150°F, and 200°F are used will be 11.2 psig

Learn more on controller system here;

https://brainly.com/question/25480553

#SPJ1

An alpha-numeric designator which is systematically assigned at the time of manufacture, so as to identify the manufacturer, month, year, location, and batch is referred to as lot number.

A product can be defined as any physical object (tangible item) that is typically produced by a manufacturer so as to satisfy and meet the demands, needs or wants of every customer. Also, some examples of a product include the following:

A lot number can be defined as an alpha-numeric designator which is systematically designed and assigned at the time of manufacture, so as to identify the manufacturer, month, year, location, and batch.

Read more on products here: brainly.com/question/14308690

#SPJ1

Answer:

13.9357 horse power

Explanation:

Annealed copper

Given :

Width, b = 9 inches

Thickness, \($h_0=2.2$\) inches

K= 90,000 Psi

μ = 0.2, R = 14 inches, N = 150 rpm

For the maximum possible draft in one pass,

\($\Delta h = H_0-h_f=\mu^2R$\)

     \($=0.2^2 \times 14 = 0.56$\) inches

\($h_f = 2.2 - 0.56$\)

     = 1.64 inches

Roll strip contact length (L) = \($\sqrt{R(h_0-h_f)}$\)

                                             \($=\sqrt{14 \times 0.56}$\)

                                             = 2.8 inches

Absolute value of true strain, \($\epsilon_T$\)

\($\epsilon_T=\ln \left(\frac{2.2}{1.64}\right) = 0.2937$\)

Average true stress, \($\overline{\gamma}=\frac{K\sum_f}{1+n}= 31305.56$\) Psi

Roll force, \($L \times b \times \overline{\gamma} = 2.8 \times 9 \times 31305.56$\)

                                 = 788,900 lb

For SI units,

Power = \($\frac{2 \pi FLN}{60}$\)  

           \($=\frac{2 \pi 788900\times 2.8\times 150}{60\times 44.25\times 12}$\)

           = 10399.81168 W

Horse power = 13.9357

Answer:

B

Explanation:

A short statement that describes what you want

A goal or aim best describes an objective statement.

What is objective statement?

Objectives are utilised in many different corporate and job-search scenarios. They are brief sentences that express just what you desire. While your ultimate objective may be to find work, your resume statement may mention that you wish to work as a nurse. In a business setting, aim statements contain specifics on how you intend to attain a corporate goal. In the past, one of the most typical places to see goal statements was in resumes. They were the one to three lines of text at the top of a resume that notified an employer a little about the candidate's level of experience and the type of job they desired.

An objective statement is a brief, position-centered statement that describes the value you can provide and the needs you can meet. A concise explanation of the skills and qualifications you will offer to a position may be included in an objective. A professional summary is more detailed and longer than an objective statement.

So, the right answer is B.

To learn more about objective statement

https://brainly.com/question/18076380

#SPJ2

The mysql.connector.connect() function is used in a Python program to establish a connection to a MySQL database. It can throw an exception for various reasons, including the ones mentioned in the question.

One possible reason why the function may throw an exception is if it is called with a username that does not have access to the database. In such cases, the program may need to modify the user's privileges or credentials to gain access.

Another possible reason for the exception is if the function is called without a CREATE TABLE statement. This statement is used to create tables in the database, and without it, the program may not be able to access or manipulate data.

Lastly, if the function is called without a matching connection.close() call, it can also cause an exception. This is because it is important to properly close the connection to the database after use to prevent memory leaks and other issues.

In conclusion, the mysql.connector.connect() function may throw an exception in a Connector/Python program due to various reasons, including incorrect credentials, missing statements, and improper usage.

For more information on Python programs visit:

brainly.com/question/31789363

#SPJ11

The pressure needed at point (1) to produce the flow where water "bubbles up above the exit of the vertical pipe attached to three horizontal pipe segments is 0.750 psi.

The Bernoulli's equation for incompressible fluid can be given as,

\(P_1+\dfrac{1}{2}\rho v_1^2+\rho gh_1=P_2+\dfrac{1}{2}\rho v_2^2+\rho gh_2\)

Here, ρ is density of fluid, g is acceleration due to gravity, (P) is the pressure v is velocity, h is height of elevation and subscript (1 and 2) is used for point 1 and 2.

Water "bubbles up" h2 = 9 in.  Above the exit of the vertical pipe attached to three horizontal pipe segments.

The total length of the 1.75-in.- diameter galvanized iron pipe between point (1) and the exit is 21 inches. h3 = 18 in.

Reynolds number is,

\(R_e=\dfrac{V_3D}{v}\\R_e=\dfrac{4.01\dfrac{0.75}{12}}{1.21\times10^{-15}}\\R_e=2.07\times10^4\)

The formula for the ratio of pressure to radius, when pressure and velocity at point 2 is zero can be given as,

\(\dfrac{p_1}{r}=z_2\left(f\dfrac{l}{d}+\sum k_L\right)\dfrac{v^2}{2g}-\dfrac{v_1^2}{2g}\)

Here, f=0.039 and ∑K(L)=4.5. Put the values,

\(\dfrac{p_1}{r}=\dfrac{7}{12}\left(0.03\dfrac{21}{0.75}+4.5-1\right)\dfrac{4.01^2}{2\times32.2}\\\dfrac{p_1}{r}=1.73\rm\; ft\)

Put the value of r we get,

\(p_1=62.4\times1.73\\p_1=108\rm\; ib/ft^2\\p_1=0.750\rm\; psi\)

The pressure needed at point (1) to produce the flow where water "bubbles up above the exit of the vertical pipe attached to three horizontal pipe segments is 0.750 psi.

Learn more about the Bernoulli's equation here;

https://brainly.com/question/7463690

#SPJ1

The lighting fixtures should be waterproof and properly sealed.

Lighting fixtures installed above an indoor pool need to meet specific criteria to ensure safety and durability. These fixtures should be designed specifically for wet or damp environments and be rated as waterproof.

Water can create a hazardous situation if it comes into contact with electrical components, so the fixtures must have appropriate seals to prevent water ingress. Additionally, it's crucial to choose fixtures that are corrosion-resistant to withstand the humid environment around the pool.

The requirements for lighting fixtures in wet environments to ensure safety and longevity. Waterproofing and proper sealing are crucial to protect against electrical hazards and ensure the fixtures can withstand the pool's surroundings.

Learn me about Lighting fixtures

brainly.com/question/14924764

#SPJ11

The capacitor's charge and voltage are both still zero immediately after the switch is closed because it has not had time to charge up.

The relationship is denoted by the equation q=CV, where q is the stored charge, C is the capacitance, and V is the applied voltage. One might wonder, after looking at this formula, what would happen if the capacitance was changed while the charge remained constant. Of course, the voltage will change in response to this. A capacitor's capacitance (C) and the voltage (V) that is applied to it are multiplied together to form the charge (Q) that is stored there. A capacitor's capacitance should always be a constant, predetermined value. So, we can change the voltage to change the cap's charge. Less voltage equals less charge, and more voltage equals more charge. One of the plates of a charged capacitor is positively charged, and the other plate has an equal amount of negative charge.

Learn more about voltage here:

https://brainly.com/question/29445057

#SPJ4

The acceleration at points A, B and C are respectively; 960 mm²/s, 1600 mm²/s and 600 mm²/s

The drum rolls without sliding and as such its' instantaneous center will lie at B. Thus;

V_d = V_c = 160 mm/s

Also, a_d = a_c = 600 mm²/s

Now, formula for velocity at A is;

V_a = r_ab * ω

where ω = 160/(100 - 60)

ω = 4 rad/s

V_a = 60 * 4

V_a = 240 mm/s

Acceleration at A = V_a²/r_ab

Acceleration at A = 240²/60 = 960 mm²/s

Now, V_b = 100 * 4 = 400 mm/s

Acceleration at B = 400²/100 = 1600 mm²/s

Read more about Acceleration at; https://brainly.com/question/14344386

Answer:

There are a few key benefits to a pre-construction and design specialist taking an interdisciplinary approach:

To maximize employability options. Having exposure to different fields and skills makes a specialist a more versatile and attractive job candidate. They can work across multiple areas of design, planning, architecture and construction.

To draw on a varied creative tool set. Exposure to fields like architecture, engineering, economics, sustainability and more provides many perspectives and solutions to tapping into. This leads to more innovative and well-rounded design thinking.

To integrate well with other team members. Understanding the methods, priorities, constraints and languages of fields like architecture, engineering, planning, and construction allows a specialist to collaborate more effectively. They can translate across disciplines and facilitate joined-up thinking.

To understand constraints and optimally balance priorities. No design or pre-construction problem has limitless options. An interdisciplinary approach helps gain insights into the constraints each field operates under and how to optimize solutions across ecological, economic, functional and other priorities.

To consider impacts holistically. Many impacts, like environmental sustainability, cost efficiency and user experience, span multiple disciplines. An interdisciplinary mindset is needed to evaluate options based on overall impact, not just impacts within one area of focus.

Of these options, I believe "To integrate well with other team members" is the strongest summary of why an interdisciplinary approach is so valuable for this type of specialist role. Understanding other fields in depth helps in collaborating, communicating clearly, addressing concerns proactively and finding optimal compromise - all of which are key to successfully interweaving different areas of expertise on a team.

Explanation:

Answer:

G = $37,805.65

Explanation:

I found this on another site:

475,000 = 25,000(P/A,10%,6) + G(P/G,10%,6)

475,000 = 25,000(4.3553) + G(9.6842)

9.6842G = 366,117.50

G = $37,805.65

The  gradient each year through at an interest rate of 10% per year is $37,805.65.

Investment refers to the money spend on the acquiring the assets and also to build up the capital for the businessmen and wealth for the individual. It involves saving of the money.

Investment is the collection of the money from other primary source of the income. It also includes profit gains from the investment over a specific period of time.

According to the question,  projected arithmetic gradient is $475,000 and estimated income for one year is $25,000.

Thus, the gradient for each year is calculated as follows:-

475,000 = 25,000(P/A,10%,6) + G(P/G,10%,6)

475,000 = 25,000(4.3553) + G(9.6842)

9.6842G = 366,117.50

Gradient  = $37,805.65

Therefore, it can be concluded that  gradient each year through at an interest rate of 10% per year is $37,805.65.

Learn more about investment here:

https://brainly.com/question/14019511

#SPJ2

Sorry sir i don't know the answer

Answer:

Here's the MATLAB code to create the table:

% Create a vector of power values from 100 W to 10000 W

P = [100:100:1000, 2000:1000:10000];

% Convert power values from watts to horsepower

HP = P ./ 745.7;

% Create a table to display the results

T = table(P', HP', 'VariableNames', {'Power_W', 'Power_HP'})

This will create a table T with two columns: Power_W for power values in watts and Power_HP for power values in horsepower. The table will show the conversion of power values from 100 W to 10000 W in increments of 100 W up to 1000 W and increments of 1000 W all the way up to 10000 W.

Explanation: