if you have a voltmeter, measure the voltage and the current of your battery; what is the power produced by your lemon battery?

Answer:

Understanding patterns is important for human development because it allows us humans to make more Educated guesses in life. It allows the human brain to strengthen its logical thinking.

Explanation:

For example: A baby will occasionally learn to roll over or crawl through time. The pattern of doing such things allows the baby to learn more from its actions to make new ones.

I hope this helped im new but want to help :)  

According to the given statement:

The entropy change of this rivet is  -0.245 kJ/K.

The correct option is B.

Entropy change is a phenomenon that quantifies how disorder or randomness has changed in a thermodynamic process. It has to do with the heat or enthalpy conversion that occurs during work. More randomness indicates a high entropy in a thermodynamic system.

A substance's entropy rises when it is divided into several components. Entropy is increased during the dissolution process because the solute become kept separate from each other when a solution is created. As temperature increases, entropy rises as well.

When the TDS equation is simplified for this circumstance and integrated, the outcome is:

Temperature1 =  800 k

Temperature2 =  300 k

Mass =   0.5-kg steel

the formula of entropy change:

S2 - S1= mC

(T2 / T1) = 0.5 (0.5)

(300 / 800) = -0.245 kJ/K.

The entropy change of this rivet is  -0.245 kJ/K.

To know more about Entropy change visit:

https://brainly.com/question/4526346

#SPJ4

Answer: C, supplements and drugs both undergo stringent government testing.

Explanation: took the unit test.

hope this helps :)

Answer:

C

Explanation:

Answer:

It would be option B.

Explanation:

Option B. is the right answer because as the mass of the canon increases the kinetic energy will increase as well, but the will decrease due to its greater mass.

If the mass of the cannonball increases, and all other initial conditions stay the same,  the velocity decreases, and the kinetic energy increases.

The kinetic energy of an object is the energy possessed by the object due to its motion.

\(K.E = \frac{1}{2} mv^2\)

where;

When the mass increases, the kinetic energy will increase.

\(v^2 = \frac{2K.E }{m}\\\\v=\sqrt{\frac{2K.E }{m}}\)

when the mass increases, the velocity of the cannonball will decrease.

Thus, we can conclude that if the mass of the cannonball increases, and all other initial conditions stay the same,  the velocity decreases, and the kinetic energy increases.

Learn more here:https://brainly.com/question/6498875

When the elevator comes to a stop, the supporting cable is held at -3000 N of tension.

A force that is transmitted when a rope, cable, or string is pulled tight is tension. The pulling force that an object exerts on a rope, cable, or string transmits along its length to another object that is attached to the other end is known as tension. The force along the length of a rope or cable that is being stretched or pulled is known as tension in physics.

We must determine the elevator's net force in order to determine the supporting cable's tension. The sum of the elevator's acceleration and mass creates this net force. As a result of the elevator's slowdown in this instance, its acceleration is negative (opposing its velocity).

The elevator's acceleration can be determined using the equation for average acceleration:

where a = (v_f - v_i) / t

The elevator's acceleration is denoted by a, the elevator's final velocity is denoted by v_f, and the initial velocity is denoted by v_i, which is 7.0 m/s. The time interval is denoted by t, which is 3.5 seconds.

a = (0 - 7.0) / 3.5

a = -2.0 m/s²

The net force on the elevator is given by the equation:

F_net = m × a

where:

F_net is the net force on the elevator

m is the mass of the elevator (1500 kg)

a is the acceleration of the elevator (-2.0 m/s²)

Substituting the values:

F_net = 1500 × -2.0

F_net = -3000 N

Since the cable is the only force , the tension (T) in the cable must be equal to the net force:

T = F_net

T = -3000 N

Learn more about Tension:

brainly.com/question/24994188

#SPJ1

The length of an organ pipe can be calculated using the formula:

L = v / (2f)

where L is the length of the pipe, v is the speed of sound in air, and f is the frequency of the pipe. To find the length of the pipe, we can use the average of the two frequencies as the frequency of the pipe:

f = (550 Hz + 650 Hz ) / 2 = 600 Hz

Assuming the speed of sound in air is approximately 340 m/s:

L = v / (2f) = 340 / (2 * 600) = 0.057 m

So, the length of the organ pipe is approximately 0.057 meters.

learn more about frequencies :

https://brainly.com/question/27151918

#SPJ4

The sum of deviations is almost zero, we can say that these measurements gave an accurate result

Given data:Length of wire after experiment

Trial 1 = 23.50 mm

Trial 2 = 25.0 mm

Trial 3 = 35 mm

We need to find the average of the three trials.

To find the average, we use the formula:

Average = $\frac{Sum \, of \, observations}{Total \, number \, of \, observations}$

Sum of observations = Trial 1 + Trial 2 + Trial 3

= 23.50 mm + 25.0 mm + 35 mm

= 83.50 mm

Total number of observations = 3

Therefore, Average =$\frac{Sum \, of \, observations}{Total \, number \, of \, observations}

= $\frac{83.50}{3}$

= 27.83333 (rounded off to 27.8).

The average length of the wire, to the correct number of significant figures, is 27.8mm.Now, we need to decide if these measurements gave an accurate result.

We can calculate the deviation of each measurement from the mean using the formula:

Deviation = Measurement - Mean

Deviation 1 = 23.50 mm - 27.8 mm= -4.3 mm

Deviation 2 = 25.0 mm - 27.8 mm= -2.8 mm

Deviation 3 = 35 mm - 27.8 mm= 7.2 mm

The sum of deviations is:-4.3 mm - 2.8 mm + 7.2 mm= -0.1 mm

Since the sum of deviations is almost zero, we can say that these measurements gave an accurate result.

To know more about average , visit ;

https://brainly.com/question/130657

#SPJ11

Friction plays a significant role in the conservation of energy by converting mechanical energy into thermal energy.

Friction is a force that opposes the motion or attempted motion of objects in contact. In the context of conservation of energy, friction plays a crucial role by converting mechanical energy into other forms of energy, typically thermal energy.

When an object moves across a surface or through a fluid, friction acts in the opposite direction of the motion. As a result, mechanical energy is dissipated in the form of heat due to the interaction between the surfaces. This conversion of energy from mechanical to thermal is known as frictional heating.

Frictional heating occurs because, at the microscopic level, there are irregularities and roughness on the surfaces in contact. As the object moves, these irregularities interlock, causing resistance and generating heat. The amount of frictional force depends on various factors such as the nature of the surfaces, the force pressing them together, and the roughness of the surfaces.

From the perspective of conservation of energy, friction is considered a non-conservative force. It converts the mechanical energy of an object, which includes both kinetic energy (associated with its motion) and potential energy (associated with its position), into thermal energy. This thermal energy is typically dissipated into the surroundings and cannot be fully recovered as useful work.

In practical situations, friction is almost always present, and it often leads to energy losses. For example, when a car moves on the road, friction between the tires and the road surface causes energy to be converted into heat. This results in decreased fuel efficiency and the need for continuous input of energy to sustain the motion.

Without friction, it would be challenging to walk, drive, or even hold objects. Friction allows us to grip surfaces, maintain stability, and control our movements.

To know more about Friction here

https://brainly.com/question/28356847

#SPJ4

The statement that is true is that; nuclear fission is used to produce electric power in nuclear reactors.

We know that a fission reaction has to do with a kind of reaction in which a radioactive nucleus is bombarded by the use of a particle and then there is the disintegration of the atomic nucleus in order to produce energy.

This has been one of the ways by which we can be able to generate electricity in several power plants across the world. The loss in the mass of the reactants is the equivalent of the energy produced.

Learn more about fission:https://brainly.com/question/2732120

#SPJ1

Answer:

form a hypothesis

Explanation:

The upper leg applies the exact same amount of force on the knee as the tendon applies on the lower leg. f = 215.6 N

This is only logical as the net result of these forces is the canceling out and the leg staying stable in its position.

The magnitude of a force is how much it accelerates the object it acts on and is represented by a scalar. Size can also be viewed as a strength. Riding a bicycle is a simple example of force magnitude. It is a simple machine that converts human-supplied energy into kinetic energy.

The force exerted on the pedal results in the formation of energy. Work is done to convert this energy into kinetic energy and move the bicycle forward. Force magnitude describes the sum of all forces acting on an object. If all forces act in the same direction the force magnitude increases. If forces act on an object in different directions the magnitude of the force will decrease.

Learn more about The magnitude here:-https://brainly.com/question/24468862

#SPJ4

Answer:

where m < M is delivered to the space station. Soon after, the space station's orbit is adjusted so that it is 50 km ...

A payload of mass m, where m<M, is delivered to the space station.

The maximum mass that the vehicle is capable of moving is referred to as the mass's payload. The carrying capacity of a packet or other transmission data unit is referred to as a payload.

The phrase, which has military roots, is frequently used in relation to malicious code that can be executed and cause harm. A payload is a section of code that runs when hackers take advantage of a weakness. In other words, it's a module for an exploit.

It typically consists of a few commands that will execute on the targeted operating system in order to steal data and carry out other malicious deeds (such as keyloggers).

Therefore, A payload of mass m is sent to the space station, where m<M.

Learn more about the payload, refer to:

https://brainly.com/question/7137877

#SPJ2

This is an example of the ideal gas law, which is a combination of the three laws of thermodynamics.

The ideal gas law relates the pressure, volume, temperature, and number of particles in a gas:

PV = nRT

where;

When the car is driven, the friction between the tires and the road causes the tires to heat up. As the temperature of the air inside the tires increases, the gas particles move faster and collide more frequently with the tire walls, causing the pressure inside the tires to increase.

According to the ideal gas law, an increase in temperature causes an increase in pressure, assuming that the volume and number of particles remain constant. Therefore, the expansion of the tires due to heating is an example of the ideal gas law.

Learn more about ideal gas law here: https://brainly.com/question/12873752

#SPJ1

The separation between the plates is \(8.51*10^{-8}\).

Information: The distance between the square plates is 8.6 cm, and the rate at which the electric field changes is 1.3 x 106 V/m.s.

using formula: d=eA(E/t), d=8.85*10¬¹²*(0.086)²*1.30*10⁶

d=8.51*10⁻⁸m.

A flow of electrical charge carriers, often electrons or atoms deficient in electrons, is referred to as current. The capital letter I is a typical sign for current. The ampere, represented by the letter A, is the common unit.

It is current if it is true at the moment, right now, and in the present. The term current's origins all relate to its "present" sense. Things that are current are now occurring; they are a part of the present. Since past events are history and no longer news, news reporting focuses on "present affairs."

To know more about Currents visit;

https://brainly.com/question/13076734

#SPJ4

Explanation:

300 second = 5 minutes

details

500 watts = 500 joules per second

Time = (1.50 x 10^5 joules)/(5 x 10^2 joules per second) = .3 x 10^3 seconds =300 second

Answer:

C. Oxygen combines with carbon dioxide

Explanation:

B i o l o g y

Also, oxygen is a reactant and carbon dioxide is a product of cellular respiration that does not combine during this process

Hope it helps

If the speed of an object does NOT change, the object is traveling at uniform speed.

Answer:

answer is uniform

Explanation:

A coiled spring would be useful in illustrating a d. compressional wave. A compressional wave, also known as a longitudinal wave, is a type of wave where the disturbance or oscillation occurs parallel to the direction of wave propagation.

A coiled spring can be used to demonstrate this type of wave by compressing and expanding the coils of the spring. As the coils are compressed, they represent the regions of compression in the compressional wave. When the coils expand, they illustrate the regions of rarefaction. The coiled spring visually represents the alternating pattern of compression and rarefaction characteristic of compressional waves. A compressional wave, also known as a longitudinal wave, is a type of wave where the disturbance or oscillation occurs parallel to the direction of wave propagation. In a compressional wave, particles within the medium oscillate back and forth in the same direction as the wave is traveling.

Learn more about coiled spring here:

https://brainly.com/question/30039311

#SPJ11

The transmitted intensity is approximately 12.98 W/m^2.

The intensity of the light transmitted through a surface is given by:

i1 = i0 * cos(θ0) * cos(θta)

where i0 is the intensity of the incident light, θ0 is the angle of incidence (measured from the surface normal), and θta is the angle of transmission (measured from the surface normal).

Substituting the given values, we get:

i1 = 20.0 W/m^2 * cos(25.0°) * cos(40.0°)

i1 = 12.98 W/m^2

To know more about intensity refer here

https://brainly.com/question/3525148#

#SPJ11

Answer:

v2^2 - v1^2 = 2 g s        fundamental formula

v2 = v1 + 2 g    = v1 + 19.8         increase in velocity in 2 sec

v1^2 + 39.6 v1 + 392 - v1^2 = 2 * 9.8 * 123.1 = 2412.76

v1 = (2412.76 - 392) / 39.6 = 51.03

v2 = 51.03 + 19.6 = 70.63

T = 70.63 / .8 = 7.207 sec     time to fall height of tower

S = 1/2 g T^2 = 4.9 * 7.207^2 = 254.5 m

(Note  v2^2 - v1^2 = 70.63^2 - 51.03^2 = 2385 m

2385 / (2 * 9.8) = 122 m (close to 123.1    as was given

The dew point for the products of combustion is 52.9 °C.

(a) In practical fuel burners, air in excess of that theoretically required for complete combustion is needed to ensure that combustion is complete and that products of combustion are safe to discharge into the environment. The excess air provides additional oxygen that is used to complete the combustion of any combustibles that were not burned during the initial combustion process. The effect of excess air on the combustion process is that it lowers the temperature of the flame and reduces the concentration of pollutants in the flue gas.

(b) The complete combustion equation is: C10H22 + (32 + 11.5 × 2)O2 → 10CO2 + 11H2O

For complete combustion, the volume percentage of CO2 and O2 in the dry products of combustion is 8% and 10% respectively. The air-fuel ratio by mass can be calculated as follows:

Air-fuel ratio by mass = Mass of air / Mass of fuel

Mass of air = Mass of fuel × (1 + Excess air) Mass of fuel = 1 kg

Excess air = 20% = 0.2Air-fuel ratio by mass = (1 + 0.2) / 1 = 1.2

The dew point for the products of combustion can be calculated as follows:

Dew point = (288.3 / (ln(P / 100) - 42.677)) - 273, where P is the exhaust gas pressure in Pa.

Dew point = (288.3 / (ln(101325 / 100) - 42.677)) - 273Dew point = 52.9 °C

Therefore, the dew point for the products of combustion is 52.9 °C.

To know more about dew point refer to:

https://brainly.com/question/2716222

#SPJ11

Answer:

Your answer is 1306666.6667 Pascal

The torque about the z-axis that is out of the page at the origin is 17.15 N m clockwise.

τ = r F sin θ

For F1,

τ1 = - 3 * 6 * sin 90

τ1 = - 18 N m

For F2,

τ2 = 2 * 4.4 * sin 120

τ2 = 7.62 N m

For F3,

τ3 = 0 * 6 * sin 0

τ3 = 0

For F4,

τ4 = - 2 * 3.6 * sin 110

τ4 = - 6.77 N m

Net torque, τ = τ1 + τ2 + τ3 + τ4

τ = - 18 + 7.62 + 0 - 6.77

τ = - 17.15 N m

Since τ is in negative, the direction is clockwise.

The given question is incomplete. The complete question is:

Calculate the torque (in N · m) about the z-axis that is out of the page at the origin in the following figure, given that F1 = 6.0 N, F2 = 4.4 N, F3 = 6.0 N, F4 = 3.6 N. (Indicate the direction with the sign of your answer.) The figure is shown in the image attached.

To know more about torque

https://brainly.com/question/6855614

#SPJ4

The Resistance of the wire that makes up the heating element of the toaster is 13.75Ω.

What is Resistance?

Resistance is the measure of the opposition to current flow in an electrical circuit.

S.I. Unit of resistance is ohms, symbolized by the Greek letter omega (Ω)

Also from Ohm's Law,\(R=\frac{V}{I}\)

From power-current relation

P=VI

Also, \(I=\frac{P}{V}\)

\(I = \frac{1050}{120}\)

I = 8.75 A

From Ohm's Law,\(R=\frac{V}{I}\)

\(R = \frac{120}{8.75}\)

R = 13.75 Ω

The Resistance of the wire is 13.75 Ω

For more resistance questions visit

https://brainly.com/question/14547003

#SPJ1

The average speed of each cyclist can be determined by using the formula for average speed.

The formula for average speed, which is distance travelled divided by time.

Since the two cyclists start 30 miles apart and meet 1 hour later, we can use the formula:
Average speed = Distance traveled / Time

Let's call the slower cyclist's average speed "S" and the faster cyclist's average speed "F".

We know that F = 2S, since the faster cyclist travels twice as fast as the slower one.

We can also use the fact that the two cyclists meet 1 hour later to set up an equation:

S + F = 30 / 1

Substituting in the value of F from the first equation, we get:

S + 2S = 30

Simplifying, we find that:

3S = 30

S = 10

So the slower cyclist's average speed is 10 mph, and the faster cyclist's average speed is 2S = 20 mph.

Therefore, the two cyclists are traveling at an average speed of 10 mph and 20 mph towards each other.

To know more about speed, refer here:

https://brainly.com/question/17661499#

#SPJ11

Answer:

100 N

Explanation:

For ONE bullet ( .025 kg)

 fired to 1000 m/s   in  .25 s   ( four per second)

     acceleration = 1000 m/s   /  .25 s = 4000 m/s^2

then F = ma

           = .025 kg * 4000 m/s^2 = 100 N

a. The kilograms of mass that are converted to energy in the explosion is 1.1 × 10^27kg.

b. The ratio of mass destroyed to the original mass of the star is 5.55 × 10^-5.

It should be noted that the total energy is calculated as:

E = Ymc²

where m = mass

c = speed

y = relativistic factor

This will be illustrated as:

1 × 10^44J = 1 × 3.00 × 10^8 m/s

m = 1.11 × 20^27 kg

The mass is 1.1 × 10^27kg.

The ratio of mass destroyed to the original mass of the star will be:

= mass destroyed / original mass

= (1.1 × 10^27) / (2.0 × 10^31)

= 5.55 × 10^-5

Learn more about ratio on:

brainly.com/question/2328454

#SPJ1