If it takes 50 J of energy to move 10 C of charge from point A to point B, what is the magnitude of the potential difference between points A and B?
a) 500 V
b) 50 V
c) 5.0 V
d) 0.50 V

Answer:

See below

Explanation:

Check One-Sample T-Interval Conditions

Random Sample? √

Sample Size ≥30? √

Independent? √

Population Standard Deviation Unknown? √

One-Sample T-Interval Information

Problem 1

The critical t-value, as mentioned previously, would be \(t^*=2.0096\), making the 95% confidence interval equal to \(CI=\bar{x}\pm t^*(\frac{S_x}{\sqrt{n}})=390.25\pm2.0096(\frac{30.5}{\sqrt{50}})\approx\{381.5819,398.9181\}\)

This interval suggests that we are 95% confident that the true mean levels of lead in soil are between 381.5819 and 398.9181 parts per million (ppm), which satisfies the EPA's regulated maximum of 400 ppm.

Answer:

Beam of 25" depth and 12" width is sufficient.

I've attached a detailed section of the beam.

Explanation:

We are given;

Beam Span; L = 20 ft

Dead load; DL = 0.50 k/ft

Live load; LL = 0.65 k/ft.

Beam width; b = 12 inches

From ACI code, ultimate load is given as;

W_u = 1.2DL + 1.6LL

Thus;

W_u = 1.2(0.5) + 1.6(0.65)

W_u = 1.64 k/ft

Now, ultimate moment is given by the formula;

M_u = (W_u × L²)/8

M_u = (1.64 × 20²)/8

M_u = 82 k-ft

Since span is 20 ft, it's a bit larger than the average span beams, thus, let's try a depth of d = 25 inches.

Effective depth of a beam is given by the formula;

d_eff = d - clear cover - stirrup diameter - ½Main bar diameter

Now, let's adopt the following;

Clear cover = 1.5"

Stirrup diameter = 0.5"

Main bar diameter = 1"

Thus;

d_eff = 25" - 1.5" - 0.5" - ½(1")

d_eff = 22.5"

Now, let's find steel ratio(ρ) ;

ρ = Total A_s/(b × d_eff)

Now, A_s = ½ × area of main diameter bar

Thus, A_s = ½ × π × 1² = 0.785 in²

Let's use Nominal number of 3 bars as our main diameter bars.

Thus, total A_s = 3 × 0.785

Total A_s = 2.355 in²

Hence;

ρ = 2.355/(22.5 × 12)

ρ = 0.008722

Design moment Capacity is given;

M_n = Φ * ρ * Fy * b * d²[1 – (0.59ρfy/fc’)]/12

Φ is 0.9

f’c = 4,000 psi = 4 kpsi

fy = 60,000 psi = 60 kpsi

M_n = 0.9 × 0.008722 × 60 × 12 × 22.5²[1 - (0.59 × 0.008722 × 60/4)]/12

M_n = 220.03 k-ft

Thus: M_n > M_u

Thus, the beam of 25" depth and 12" width is sufficient.

Answer:

kindly check the explanation section.

Explanation:

The word ''sprawl'' as it is related to people and population simply means an irregular expansion and the word ''urban'' simply means a city. So, putting both together as "urban sprawl" simply means an irregular expansion of cities or town.

Urban sprawl is majorly caused by race and land and the characteristics of urban sprawls are: [1]. there is High dependency on automobiles, [2]. the development is dispersed, and [3]. there is low density.

Answer:

False, metal and dirt ARE considered contaminants!

Explanation:

i ride motocross! trust me!

The statement "Metal and dirt are not considered contaminants to oil" is false. The correct option is B.

Metals are chemical elements that have high thermal and electrical conductivity, and they are soft and ductile. Magnesium, helium, gold, and silver are metals. They are very reactive, and they contain both gas and solids.

Oil and dirt are considered contaminated to oil. It causes a chemical reaction in the oil, that's why it is a problem with contamination of the oil. It causes reactions like depletion or oxidation.

In motor oils, there are many chances of pollution with dirt and metals, and other oxides. This causes debris and leads to degradation of work of lubrication of engine parts, which causes friction.

Thus, the statement is true. The correct option is B.

To learn more about metals, refer to the link:

brainly.com/question/19071956

#SPJ6

Answer:

conduction occurs when a substance is heated

Explanation:

Answer:

Explanation:

Tech Social Media giant FB is one of those companies. Not long ago the ceo was brought to court to accusations that his company was selling user data. Turns out this is true and they are selling their users private data to companies all over the word. Once the news turned to something else, people focused on something new but the company still continues to sell it's users data the same as before. This is completely unethical as the information belongs to the user and they are not getting anything while the corporation is profiting.

Answer:

6.564 is the answers i learned that in the american school i live there

Because she has a Victim mindset and having low grade in her Math class, Julianna believes: A. her low grades are the fault of her unfair teacher.

A Victim mindset is also referred to as victim mentality and it can be defined as an acquired personality trait in which an individual tends to recognize and believe that the negative and unfair actions of others towards him or her, is responsible for the bad and unpleasant things that happens.

This ultimately implies that, an individual with a Victim mindset is prejudiced and strongly believes that every other person is against him or her, and as such these people are responsible for their failures.

Read more on Victim mindset here: https://brainly.com/question/17116209

#SPJ1

Answer:

print(100/42)

Explanation:

This is the operand for division in python and some other languages.

The decision of whether it is worth the effort to make small improvements on pressure ratio for a stage in an axial compressor depends on various factors such as the specific application, the cost of the improvements, and the benefits that the improvements may provide.

In the case of a gas turbine with a total pressure ratio of 24, the number of stages required to achieve this pressure ratio would depend on the pressure ratio per stage. If each stage has a pressure ratio of 1.23, then the number of stages required would be:

24 / 1.23 = 19.51

Since the number of stages must be an integer, the gas turbine would require 20 stages to achieve a total pressure ratio of 24.

The power to weight ratio of the gas turbine is an important metric for assessing its efficiency and performance. Improving the pressure ratio per stage can result in a higher total pressure ratio for the gas turbine, which can lead to improved power output and efficiency. However, this improvement comes at the cost of additional weight and complexity in the form of additional compressor stages.

Therefore, the decision to invest in improving the pressure ratio per stage in an axial compressor should be made after considering the potential benefits in terms of improved power output and efficiency, as well as the costs associated with additional weight and complexity.

Learn more about weight ratio here:

https://brainly.com/question/31078208

#SPJ11

Answer:

Routine

Explanation:

Loop Structures — The Method Of Repeating Routines In Statements. Repetition of code are called loops, and they are defined as statements that execute lines of code (or routines) repeatedly according to conditions or iterations. ... Take for example a routine that must write as output the string “Hello” 40 times

Explanation:

Dora is shopping!!! yayayyayaysyayyayayayayayyayayayayysya

Answer:

i think its called leggings thats wut my shop teacher told me

Explanation:

A pre-incident plan is a document that outlines various aspects of a building before an incident occurs. The document may include key information such as the location of fire hydrants, gas and electric shut-off valves,

building access points, and other critical details that first responders may need to know in case of an emergency.

The purpose of a pre-incident plan is to provide critical information that can help emergency responders to respond to an incident safely and efficiently. The plan typically includes the building's physical layout, fire protection systems, hazardous materials storage, and other relevant information.

Pre-incident plans are often created for commercial and industrial buildings where the risk of an emergency is high. However, they can be created for any building, including residential homes. Pre-incident plans can be used by first responders to develop an effective emergency response plan, which includes evacuation procedures, rescue operations, and fire suppression techniques.

Having a pre-incident plan can help to reduce the risk of injury and loss of life in the event of an emergency.By having pre-incident plans, it is easier to identify the hazard and risks associated with the building. It allows emergency responders to access information related to the building that can save time and possibly lives during an emergency response.

To know more about various visit:

https://brainly.com/question/30929638

#SPJ11

Option A holds the correct answer. Because the statement given in option A truly reflects the radial load and axial load.

When the load pressure is perpendicular to the axis of the shaft, a radial load is applied and when the load pressure is parallel to the axis of the shaft, an axial load is applied. In other words, the radial load is applied when the pressure from the load is 'perpendicular to the axis of the shaft'. In contrast, the axial load is applied when the pressure from the load is 'parallel to the axis of the shaft'.

However, the rest of the statements are not correct in the context of radial loads and axial loads.

You can learn more about load pressure at

https://brainly.com/question/28012687

#SPJ4

Answer:

What grade is this is for??

Answer: 0

Explanation: i need to add it up to get what u want

The tension in the cable is -220N

A particle is in mechanical equilibrium according to classical mechanics if there is no net force acting on it. A particle is said to be in static equilibrium if its velocity is zero.

It is always feasible to identify an inertial reference frame in which a particle is stationary with regard to the frame because all particles in equilibrium have constant velocities.

The tension in the cable will be:

= 430N - 650N

= -220N

Learn more about tension on

https://brainly.com/question/24994188

#SPJ1

The required belt width is approximately 18.86 mm.

v = π * D * N / 60

where:

D = Diameter of the pulley (300 mm or 0.3 m)

N = Speed of the pulley (1600 r.p.m)

v = π * 0.3 * 1600 / 60 ≈ 25.13 m/s

Next, we need to find the slack side tension (T2) using the following formula:

T2 = T1 * e^(-μ * θ)

where:

e = Euler's number (approximately 2.718)

θ needs to be converted to radians:

θ_rad = θ * (π / 180)

θ_rad = 210 * (π / 180) ≈ 3.665 radians

Now we can calculate T2:

T2 = 8 * e^(-0.22 * 3.665) ≈ 4.55 N/mm

Now, we can solve the equation for the belt width (w):

P = (T1 - T2) * v * μ * θ / (9.81 * 1000)

7.5 * 1000 = (8w - 4.55w) * 25.13 * 0.22 * 3.665 / (9.81 * 1000)

w = (7.5 * 1000 * 9.81) / ((8 - 4.55) * 25.13 * 0.22 * 3.665)

w ≈ 18.86 mm

So, the required belt width is approximately 18.86 mm.

Read more on tension

https://brainly.com/question/14336853

#SPJ1

Solution :

Given :

h = 2 cm

Diameter of the tube , d = 1 mm

Diameter of the hose, D = 6 mm

Between 1 and 2, by applying Bernoulli's principle, we get

As point 1 is just below the free surface of liquid, so

\($P_1=P_{atm} \text{ and} \ V_1=0$\)

\($\frac{P_{atm}}{\rho g}+\frac{v_1^2}{2g} +h = \frac{P_2}{\rho g}$\)

\($\frac{101.325}{1000 \times 9.81}+0.02 =\frac{P_2}{\rho g}$\)

\($P_2 = 111.35 \ kPa$\)

Therefore, 111.325 kPa is the gas supply pressure required to keep the water from leaking back into the tube.

Velocity at point 2,

\($V_2=\sqrt{\left(\frac{111.135}{\rho g}+0.02}\right)\times 2g$\)

   = 1.617 m/s

Flow of water,  \($Q_2 = A_{tube} \times V_2$\)

                               \($=\frac{\pi}{4} \times (10^{-3})^2 \times 1.617 $\)

                               \($1.2695 \times 10^{-6} \ m^3/s$\)

Minimum air flow rate,

\($Q_2 = Q_3 = A_{hose} \times V_3$\)

\($V_3 = \frac{Q_2}{\frac{\pi}{4}D^2}$\)

\($V_3 = \frac{1.2695 \times10^{-6}}{\pi\times 0.25 \times 36 \times 10^{-6}}$\)

    = 0.0449 m/s

b). Reynolds number in hose,

\($Re = \frac{\rho V_3 D}{\mu} = \frac{V_3 D}{\nu}$\)

υ for water at 25 degree Celsius is \($8.9 \times 10^{-7} \ m^2/s$\)

υ for air at 25 degree Celsius is \($1.562 \times 10^{-5} \ m^2/s$\)

\($Re_{hose}=\frac{0.0449 \times 6 \times 10^{-3}}{1.562 \times 10^{-5}}$\)

           = 17.25

Therefore the flow is laminar.

Reynolds number in the pipe

\($Re = \frac{V_2 d}{\nu} = \frac{1.617 \times 10^{-3}}{8.9 \times 10^{-7}}$\)

                = 1816.85, which is less than 2000.

So the flow is laminar inside the tube.

No, an engine equipped with a pressure carburetor is not started in the idle cut-off position. The idle cut-off position is a feature found on some aircraft engines that allows the pilot to completely shut off the fuel flow to the engine during certain situations, such as during an emergency or when the engine needs to be stopped quickly.

However, engines equipped with a pressure carburetor are typically not started in the idle cut-off position. A pressure carburetor is designed to automatically regulate the fuel-air mixture based on the air pressure entering the carburetor. It relies on a constant flow of fuel to function properly. When starting an engine with a pressure carburetor, the fuel flow needs to be established to ensure a proper mixture for ignition. Therefore, the engine should be started with the fuel control in a position that allows fuel to flow, such as the "run" or "normal" position, rather than the idle cut-off position.

In summary, engines equipped with a pressure carburetor are not started in the idle cut-off position. They require fuel flow to establish the proper fuel-air mixture for ignition, so the fuel control should be in a position that allows fuel to flow during the starting process.

To learn more about carburetor refer:

https://brainly.com/question/24946792

#SPJ11

Answer:

if you encounter fishing or hunting boats while you are paddling, be courteous.

Give them a wide berth.

Never run overfishing lines. Be aware that anglers may have lines out to the sides of their boat or trolling behind them.

Explanation:

Answer:

  A

Explanation:

An open circuit has infinite resistance, not 0. A circuit with continuity usually measures a few ohms or less, depending on the length and gauge of the wire and the condition of the connections. Often, on a general-purpose ohmmeter, the reading is very near 0 ohms.

Technician A is correct.

The operation you are referring to is called "heap deletion" or "deleting from a heap".

When deleting a node from a heap, the value of the node to be deleted is replaced with the maximum value in the heap, which is the value at the root node. This ensures that the heap property is maintained.

After replacing the value, the new root node may no longer be in its correct position in the heap. To restore the heap property, we "bubble down" the new root node by comparing it to its child nodes and swapping it with the larger child until it is in its correct position. This process continues until the heap property is restored.

Overall, the process of deleting from a heap involves two steps: replacing the deleted node with the maximum value in the heap, and then restoring the heap property by bubbling down the new root node to its correct position.

Learn more about The operation: brainly.com/question/30194232

#SPJ11

If there were a way to categorize systems using a measure, it would make buying a computer easier for the customer.

Anyone who purchases goods, services, products, or ideas from a seller, vendor, or supplier in exchange for money or another advantageous compensation is referred to as a customer. This phrase includes business, economics, and sales. The name "client" comes from the Latin word "clients'," which means "to incline" or "to bend." It has to do with the sentimental notion of ending things. It is generally accepted that people only make frequent adjustments when they are driven by fear or greed. Since gaining a customer is a one-time occurrence, professionals that deal with special issues are more likely to draw long-term clients than transient ones. Long-term customers make purchases based on factors other than price and value, in contrast to regular customers.

Learn more about customers from

brainly.com/question/1286522

#SPJ4

✅C) Avoid having to use a net ✅

IamSugarBee

Another term to describe a systematic approach for developing training programs is Instructional Systems Design (ISD).

ISD is a process that involves analyzing training needs, designing instructional materials, developing and delivering the training, and evaluating its effectiveness. This approach ensures that training programs are effective, efficient, and meet the learning objectives of the participants.

ISD typically follows a step-by-step process, including conducting a needs assessment, setting specific objectives, designing the curriculum and instructional materials, implementing the training, and evaluating its outcomes.

By using ISD, organizations can develop high-quality and learner-centered training programs that align with the needs and goals of both the learners and the organization.

Learn more about systematic approach https://brainly.com/question/30638332

#SPJ11

Answer: b fixed and sliding

Explanation: