FILL IN THE BLANK. network bottlenecks occur when___ data sets must be transferred. large small big all of the mentioned
Answers
Network bottlenecks occur when large data sets must be transferred.
What is Network ?
A network is a group of two or more connected devices (such as computers, servers, or other electronic devices) that can exchange data with each other. Networks can be either local (LAN) or wide area (WAN), and can use wired or wireless communication technologies. The purpose of a network is to share resources (such as printers, files, or Internet access), exchange information, and facilitate communication between users.
Networks can range in size from just a few devices within a single room to large, global networks that connect millions of devices across the world. Networks can be used in a variety of settings, including homes, businesses, schools, and government organizations.
Network bottlenecks occur when large data sets must be transferred.
A network bottleneck is a point in the network where data transfer slows down because the network's capacity is exceeded. This can occur when large data sets must be transferred, and the network's bandwidth or processing power is not sufficient to handle the volume of data being transmitted. This can lead to slowdowns in data transfer, causing a bottleneck that affects the performance of the entire network. The size of the data set being transferred can also contribute to the severity of the bottleneck, as larger data sets require more bandwidth and processing power to transfer.
Learn more about Network click here :
https://brainly.com/question/28342757
#SPJ4
Related Questions
Which of the following is a positional argument?
a) ABOVE
b) MIN
c) AVERAGE
d) MAX
Answers
Among the following, which is the best protection against ransomware?
Windows File History
Carbonite
Keylogger software
Authy by Twilio
Answers
Answer:
A
Explanation:
windows file history
Explain why there are more general-purpose registers than special purpose registers.
Answers
Answer:
Explanation:
General purpose registers are used by programmer to store data whereas the special purpose registers are used by CPU for temporary storage of the data for calculations and other purposes.
0.6 tenths of an hour would be how many minutes?
Answers
Answer: 3.6 minutes
Explanation:
Instagram
Hello everyone hope you are doing well,
I am having this issue where i don’t receive notifications from instagram.
I tried signing in from another device and it workedd
( both phones are ios and same settings)
What should i do to receive notifications?
Please help
Thanks!
Answers
if it doesn’t, go to your apple settings and see if the notifications for instagram are on.
also try shutting your phone off for a few seconds if you do either one.
Absolute paths are the entire length of the link required to identify one resource.
True
False
Answers
Absolute paths are the entire length of the link that is required to identify one resource: True.
What is a path?A path can be defined as a string of characters that is typically used by programmers to uniquely identify and describe the location of a resource, document, file or folder in a directory structure, especially on a computer system.
The types of path.In Computer programming, there are two (2) main types of path and these include:
Relative pathAbsolute pathAn absolute path is simply the entire length of a link that is required to identify one resource such as an image, page, script, or media file, especially on a computer system.
Read more on path here: https://brainly.com/question/20464533
What will happen if you click Clear All in the Tabs dialog box?
Custom tabs are cleared, and default tabs are used.
All custom and default tabs are removed.
Default tabs are cleared, and custom tabs are used.
Tabs are inserted in place of spaces.
What will happen if you click Clear All in the Tabs dialog box?
Answers
If you click on the "Clear All" button in the Tabs dialog box, it will clear all the previously set tab stops.
This means that any default tabs that were set will be removed, and any custom tabs that you may have created will also be deleted.
Once you clear all the tabs, you can start creating new tabs by setting them manually, or you can use the default tabs that are set by your word processor.
The default tabs will be the ones that are set at regular intervals, such as every half-inch or every inch, depending on the software you are using.
It's important to note that clearing all the tabs in the Tabs dialog box will affect the formatting of your document.
If you have already set up your document with custom tabs, you will need to reset them after clearing all the tabs.
This can be time-consuming, so it's important to make sure that you want to clear all the tabs before doing so.
For more question on dialog box
https://brainly.com/question/28813622
#SPJ11
What lots are offsite from the stadium shuttle buses are often required to transport fans to and from the stadium?; What parking is along the street as opposed to a parking lot?
Answers
Satellite parking lots are offsite from the stadium shuttle buses and On-street parking is along the street as opposed to a parking lot.
What is satellite parking?The act of parking a satellite in its orbit around the earth is referred to as satellite parking. According to the kind of satellite, such as LEO, MEO, or GEO, the satellite is parked in a specified orbit. Internationally, the ITU assigns satellite parking spots or slots. Companies are required to receive this from the appropriate government entity of the given country.Satellite parking lots are offsite from the stadium shuttle buses are often required to transport fans to and from the stadium.Within a short distance of New York City's LaGuardia Airport, Satellite Parking Systems provides easy airport parking.On-street parking is along the street as opposed to a parking lot.To learn more about satellite, refer:
https://brainly.com/question/1069202
#SPJ4
What are vSphere Clusters and how are they utilized in vSphere?
Answers
A group of ESXi hosts set up as a vSphere cluster to share resources like processor, memory, network, and storage In vSphere environments, each cluster can hold up to 32 ESXi hosts, each of which can run up to 1024 virtual machines.
What is vSphere Clusters?The Clusters page in the vSphere Infrastructure view lets you see how many more virtual machines (VMs) can be added to each cluster, how many resources are totaled up in each cluster, and how many resources are currently available in each cluster. It also lets you manage the resources of each host that is part of the cluster.
According to the spare cluster capacity, the page shows information about the number of additional VMs that can be added to each cluster, as well as information about the powered-on and running VMs, their CPU and memory utilization, and other information. By changing the settings for the spare VM basis on this page, you can change how the spare VM basis for an average VM is calculated.
The information on this page helps to address important subsystem-related questions like the following by giving a comprehensive picture of cluster memory usage and contention using Memory metrics:
Is my environment's vSphere memory management functioning properly?In my environment, is the vSphere page sharing mechanism being used effectively? What amount of memory is shared?How much memory can you overcommit?Learn more about vSphere
https://brainly.com/question/28787607
#SPJ1
Audio Director meaning
Answers
Answer:
a senior audio engineer with extensive experience who establishes audio design rules, assigns project goals and deadlines to each team member, and oversees workflow throughout the project cycle.
write a c++ program to find the factorial of a number.
Answers
Answer:
I'm not gonna use recursion for this program.
#include <iostream>
using namespace std;
int main()
{
int input,factorial=1;
cout<<"Enter a number to get it's factorial: ";
cin>>input;
for(int i=1;i<=input;i++)
{
factorial *=i;
}
cout<<"The factorial of the number you entered is: "<<factorial;
return 0;
}
using namespace std;
int main() {
int num,factorial=1;
cout<<" Enter Number To Find Its Factorial: ";
cin>>num;
for (int a=1;a<=num;a++) {
factorial=factorial*a;
}
cout<<"Factorial of Given Number is ="< return 0;
}
Recall your technology experience in the workplace or at home. When adopting a new technology, what specific problems were you or your employer trying to resolve?
Describe your biggest challenge in adopting new technologies based on your experience.
Share how you or your employer overcame these issues.
Answers
Answer:
Use of technology helps solve issues like file management, receipt tracking, report generation and growth tracking that often hamper employee productivity. Modern workplaces extensively rely on computer-aided tools for efficiency. These tools help cut down both the time and money needed for getting the job done.
How do you implement new technology in the workplace?
To help you streamline the process, here are steps for integrating new technology into your organization:
Identify Your Organization's Needs.
Investigate Technologies That Will Solve Problems for Your Organization.
Develop a Plan for Implementing Your New Technology.
Train Other Employees in Using the New Technology
If you had to make a choice between studies and games during a holiday, you would use the _______ control structure. If you had to fill in your name and address on ten assignment books, you would use the ______ control structure.
The answers for the blanks are Selection and looping. Saw that this hasn't been answered before and so just wanted to share.
Answers
The missing words are "if-else" and "looping".
What is the completed sentence?If you had to make a choice between studies and games during a holiday, you would use the if-else control structure. If you had to fill in your name and address on ten assignment books, you would use the looping control structure.
A loop is a set of instructions in computer programming that is repeatedly repeated until a given condition is met. Typically, a process is performed, such as retrieving and modifying data, and then a condition is verified, such as whether a counter has reached a predetermined number.
Learn more about looping:
https://brainly.com/question/30706582
#SPJ1
Give an example of what Artificial Intelligence application most popular is used on a daily basis.
Answers
Answer:
Commuting and Glimpse into the future is an example of where artificial intelligence is used on daily basis.
Explanation:
Make me brainliest :)
Answer:
Simple machineries we use a home like clothes and dish washer, Pressing Iron, e.t.c.
b) What is system software? Write its importance.
Answers
Answer:
System software is software designed to provide a platform for other software. Examples of system software include operating systems like macOS, Linux, Android and Microsoft Windows, computational science software, game engines, search engines, industrial automation, and software as a service applications.
Explanation:
The Internet of Things refers to devices that are able to talk to each other. Group of answer choices False True
Answers
For python, Write a function named getResults that accepts radius of a sphere and returns the volume and surface area. Call this function with radius = 3.5 , and display results in one decimal format.
volume = 4/3 * pi * r ^ 3
Surface Area = 4pi * r ^ 2
Answers
import math
def getResults(r):
return "Volume = {}\nSurface Area = {}".format(round((4/3)*math.pi*(r**3),1), round((4*math.pi)*(r**2),1))
print(getResults(3.5))
I hope this helps!
It is always better to get at least 3 times the amount of b-roll needed
True
False
Answers
Answer:
true
Explanation:
When writing technical information to a non-technical audience, you discover that the information appears to be geared more toward an expert audience. Which of the following strategies can help to adapt the writing to meet the needs of your audience?
Answers
When adapting technical information for a non-technical audience, several strategies can be employed to ensure clarity and understanding:
The StrategiesSimplify language: Replace technical jargon and acronyms with plain language that is easily understood by the general audience.
Define terms: If technical terms are necessary, provide clear definitions or explanations to help readers comprehend their meaning.
Use analogies: Relate complex concepts to familiar everyday situations or objects, making it easier for non-experts to grasp the ideas.
Break down complex ideas: Divide complex information into smaller, more manageable sections, and provide step-by-step explanations or examples.
Visual aids: Utilize visuals such as diagrams, charts, or infographics to supplement the text and enhance understanding.
Provide context: Frame technical information within a broader context to help readers understand its relevance and importance.
Test for comprehension: Seek feedback from non-technical individuals to gauge their understanding and make necessary revisions.
By implementing these strategies, you can effectively bridge the gap between technical content and a non-technical audience, facilitating comprehension and engagement.
Read more about technical information here:
https://brainly.com/question/7788080
#SPJ1
Solve the following recurrence relation by expansion:
a. T(1) = 1, T(n) = 4 T(n/3) + n for n > 1.
b. T(1) = 1, T(n) = 2 T(n/2) + log n for n > 1.
c. T(1) = 1, T(n) = 2 T(n/4) + (n)1/2 for n > 1.
Answers
Answer:
a. We have T(n) = 4 T(n/3) + n. Expanding this recurrence relation, we get:
T(n) = 4 T(n/3) + n
= 4 [4 T(n/9) + n/3] + n (substituting n/3 for n/3)
= 4^2 T(n/9) + 4n/3 + n
= 4^2 [4 T(n/27) + n/9] + 4n/3 + n
= 4^3 T(n/27) + 4n/3 + n/3 + n
= 4^3 T(n/27) + 5n/3
Continuing this process, we can express T(n) as:
T(n) = 4^k T(n/3^k) + (4^0 + 4^1 + ... + 4^{k-1}) n/3^{k-1}
The value of k we want to find is the one such that n/3^k = 1, or equivalently, 3^k = n. Taking the logarithm base 3 on both sides, we get k = log_3(n). Substituting this value into the expression above, we obtain:
T(n) = 4^{log_3(n)} T(1) + (4^0 + 4^1 + ... + 4^{log_3(n)-1}) n/3^{log_3(n)}
= n^(log_3(4)) + (4^0 + 4^1 + ... + 4^{log_3(n)-1}) n/3^{log_3(n)}
b. We have T(n) = 2 T(n/2) + log n. Expanding this recurrence relation, we get:
T(n) = 2 T(n/2) + log n
= 2 [2 T(n/4) + log(n/2)] + log n (substituting n/2 for n/2)
= 2^2 T(n/4) + 2 log(n/2) + log n
= 2^2 [2 T(n/8) + log(n/4)] + 2 log(n/2) + log n
= 2^3 T(n/8) + 3 log(n/2) + log n
= 2^3 [2 T(n/16) + log(n/8)] + 3 log(n/2) + log n
= 2^4 T(n/16) + 4 log(n/2) + log n
...
Continuing this process, we can express T(n) as:
T(n) = 2^k T(n/2^k) + (k log(n/2))
The value of k we want to find is the one such that n/2^k = 1, or equivalently, 2^k = n. Taking the logarithm base 2 on both sides, we get k = log_2(n). Substituting this value into the expression above, we obtain:
T(n) = 2^{log_2(n)} T(1) + (log_2(n)) log(n/2)
= n + (log_2(n)) log(n/2)
C. To solve the recurrence relation T(n) = 2 T(n/4) + (n)1/2, we use the expansion method:
T(n) = 2 T(n/4) + (n)1/2
= 2 [2 T(n/16) + (n/4)1/2] + (n)1/2
= 4 T(n/16) + 2(n/4)1/2 + (n)1/2
= 4 [2 T(n/64) + (n/16)1/2] + 2(n/4)1/2 + (n)1/2
= 8 T(n/64) + 4(n/16)1/2 + 2(n/4)1/2 + (n)1/2
= 8 [2 T(n/256) + (n/64)1/2] + 4(n/16)1/2 + 2(n/4)1/2 + (n)1/2
= 16 T(n/256) + 8(n/64)1/2 + 4(n/16)1/2 + 2(n/4)1/2 + (n)1/2
= ...
= n1/2 + 2(n/4)1/2 + 4(n/16)1/2 + ... + 2k(n/4k)1/2 + ... + 8(n/n1/2)1/2
We can see that the recursion stops when n/4k = 1, or k = log4 n. So we have:
T(n) = n1/2 + 2(n/4)1/2 + 4(n/16)1/2 + ... + 2^(log4 n)(n/4^(log4 n))1/2 + ... + 8(n/n1/2)1/2
= n1/2 * [1 + (1/2)^(1/2) + (1/4)^(1/2) + ... + (1/4^(log4 n))^(1/2)] + O(1)
= n1/2 * [1 + (1/2)^(1/2) + (1/4)^(1/2) + ... + (1/n)^(1/2)] + O(1)
Thus, the solution to the recurrence relation T(n) = 2 T(n/4) + (n)1/2 is T(n) = Θ(n1/2 log n).
I need help finishing this coding section, I am lost on what I am being asked.
Answers
Answer:
when cmd is open tell me
Explanation:
use cmd for better explanatios
my dark souls 3 wont open anymore and its giving me this error "The application was unable to start correctly (0xc0000142). Click OK to close the application", someone please help its been like this since the update
Answers
Based on the error code (0xc0000142) you are getting as you attempt to launch your game application, this simply means that your game is outdated.
With this in mind, the best solution for you would be to update/upgrade the game either through OTA (Over the Air) update or buy a new game that has the updated game settings.
The error code (0xc0000142) pops up when you try to open an outdated or corrupted program and this can be solved by updating the app/software.
What is an Error?This refers to the runtime error or any other type of error that occurs when a program does not function properly.
Hence, we can see that Based on the error code (0xc0000142) you are getting as you attempt to launch your game application, this simply means that your game is outdated.
With this in mind, the best solution for you would be to update/upgrade the game either through OTA (Over the Air) update or buy a new game that has the updated game settings.
The error code (0xc0000142) pops up when you try to open an outdated or corrupted program and this can be solved by updating the app/software.
Read more about debugging here:
https://brainly.com/question/15079851
#SPJ1
Why is being a meteorologist an important career?
Answers
Answer:
Most people who get into meteorology do so for the love of all things weather and climate, not for the money. Diverse skills and a willingness to seek a variety of weather and climate related jobs ensure a long, fulfilling career.
Explanation:
Weather and climate is unpredictable, so you got to learn the way the weather shifts into the unexpected, so then you'll know the state of the weather, and climate is for when your traveling around the world, you need to know the climate, and the elevation, especially if your in Colorado Mountains region and The Front Range, cuz they are a mile up. And if the weather shifts, and you don't know what weather your in, and it might be hail, and your going outside to play some basketball or whatever, and then BAM hail starts falling and hurts you. And if you don't know the climate, your practically saying you need trouble. It might be a dry climate, or a rainy climate. Meteorology is important for even traveling and weather shifts.
What TCP message will be generated for an incoming SYN request for which is there no matching LISTENING port
Answers
Answer:
"Connection Refused"
Explanation:
This is the error message that is returned when the server is not listening on the correct port, or the server is offline.
Cheers.
The TCP message that will be generated for an incoming SYN request for which is there no matching LISTENING port is; “Connection Refused”.
TCP stands for Transmission Control Protocol and in the given situation in the question, the first step of the client application is to send the first packet with “SYN” flag.Now, when the above situation happens, the server will listen on the specified port and give a response of SYN-ACK packet so that it c an acknowledge the “SYN”packet requested by the client application which will generate a reply with ACK packet response that will make the established connection to end.
Finally, for an incoming SYN request for which is there no matching LISTENING port, the connection will be rejected with an “RST” flag that gives output an error message named “Connection Refused”.Read more about TCP at; https://brainly.com/question/24967184
A _____ address directs the frame to the next device along the network.
Answers
Answer:
When sending a frame to another device on a remote network, the device sending the frame will use the MAC address of the local router interface, which is the default gateway.
An unicast address directs the frame to the next device along the network.
What is network?
A computer network is a group of computers that share resources on or provided by network nodes. To communicate with one another, the computers use standard communication protocols across digital linkages. These linkages are made up of telecommunication network technologies that are based on physically wired, optical, and wireless radio-frequency means and can be configured in a number of network topologies.
The term "unicast" refers to communication in which a piece of information is transferred from one point to another. In this situation, there is only one sender and one receiver.
To learn more about network
https://brainly.com/question/28041042
#SPJ13
Design an HTML page and Javascript where: 1) you enter a number using a popup generated by JavaScript, 2) you enter a second number using a popup generated by JavaScript, 3) calculate a result where the two numbers are multiplied, a 4) display the result in an HTML element with red text, 5) and design the javaScript as a function
Answers
The HTML page will have two popups generated by JavaScript, one for each number. When the numbers are entered, the result will be calculated by multiplying the two numbers and displayed in an HTML element with red text. The JavaScript will be designed as a function to do the calculations.
The HTML page will contain two popups generated by JavaScript. The first popup will prompt the user to enter the first number. The second popup will prompt the user to enter the second number. Once the two numbers are entered, the JavaScript will calculate the result by multiplying the two numbers and display the result in an HTML element with red text. The JavaScript will be designed as a function to take the two numbers as parameters and then perform the multiplication to get the result. The function will then return the result to the HTML element. This will allow the user to quickly and easily calculate the result of multiplying two numbers without having to manually do the calculation.
Know more about HTML:
brainly.com/question/24065854
#SPJ4
11. is a feature in Windows that can help you stay in control of your computer by informing you when a program makes a change that requires administrator-level permission.
Answers
Answer:
User Account Control (UAC) is a feature of Windows that can help you stay in control of your computer by informing you when a program makes a change that requires administrator-level permission.
And office now has a total of 35 employees 11 were added last year the year prior there was a 500% increase in staff how many staff members were in the office before the increase
Answers
There were 5 staff members in the office before the increase.
To find the number of staff members in the office before the increase, we can work backward from the given information.
Let's start with the current total of 35 employees. It is stated that 11 employees were added last year.
Therefore, if we subtract 11 from the current total, we can determine the number of employees before the addition: 35 - 11 = 24.
Moving on to the information about the year prior, it states that there was a 500% increase in staff.
To calculate this, we need to find the original number of employees and then determine what 500% of that number is.
Let's assume the original number of employees before the increase was x.
If we had a 500% increase, it means the number of employees multiplied by 5. So, we can write the equation:
5 * x = 24
Dividing both sides of the equation by 5, we find:
x = 24 / 5 = 4.8
However, the number of employees cannot be a fraction or a decimal, so we round it to the nearest whole number.
Thus, before the increase, there were 5 employees in the office.
For more questions on staff members
https://brainly.com/question/30298095
#SPJ8
Assume that x, y, and z are int variables. Write a statement using the conditional operator (? :) that compares the values of the variables x and y. The value of the larger of the two variables should be assigned to z.
Answers
The statement using the conditional operator (? :) that compares the values of the variables x and y will be:
public class Main {
public static void main(String[] args) {
int x = 10;
int y = 20;
int z = (x > y) ? x : y;
System.out.println("z = " + z);
}
}
How to illustrate the information?The ternary conditional operator (?:) has three operands and accepts them all. A boolean expression that can be evaluated as true or false makes up the first operand. The second operand is executed if the boolean statement evaluates to true. The third operand is executed if the boolean expression returns false.
It should be noted that because 10 is not greater than 20, the boolean statement (x > y) in this program evaluates to false. As a result, the third operand (y) is executed, and z is given the value of y (20).
Learn more about program on:
https://brainly.com/question/26642771
#SPJ1
Answer:
z = (x > y) ? x : y;
Explanation:
The conditional operator in C++ is the "? :" operator. This operator checks a condition and then returns one of two values, depending on whether the condition is true or false. The syntax for the conditional operator is:
(condition) ? value_if_true : value_if_false;
z = (x > y) ? x : y; checks if the value of x is greater than y. If it is, then the value of x is assigned to z. If it is not, then the value of y is assigned to z.
what is web browser why it is needed
Answers
Answer:
The main purpose of an internet browser is to translate the code that computers use to create websites into the text, graphics, and other features of the web pages that we're used to seeing today.
Answer:
A web browser (commonly referred to as a browser) is application software for accessing the World Wide Web. When a user requests a web page from a particular website, the web browser retrieves the necessary content from a web server and then displays the page on the user's device.