Show how to PSK modulate and demodulate the data
sequence (01101). Assign two full cycles of carrier signal for
every data bit. Explain the steps in details and plots.
Answers
PSK modulation and demodulation can be performed by assigning two full cycles of carrier signal for every data bit in the sequence (01101).
Phase Shift Keying (PSK) is a digital modulation technique that represents digital data by varying the phase of a carrier signal. In the given scenario, we have a data sequence of (01101) that needs to be PSK modulated and demodulated.
To modulate the data, we assign two full cycles of the carrier signal for each data bit. Let's assume the carrier signal is a sinusoidal wave with a frequency of f and an amplitude of A.
For the first bit of the data sequence, '0', we keep the phase of the carrier signal constant for two full cycles. This means that we transmit the carrier signal without any phase shift for the duration of two cycles.
For the second bit, '1', we introduce a phase shift of 180 degrees (π radians) to the carrier signal for two full cycles. This phase shift can be achieved by inverting the carrier signal waveform.
For the third bit, '1', we again introduce a phase shift of 180 degrees to the carrier signal for two full cycles.
For the fourth bit, '0', we keep the phase of the carrier signal constant for two full cycles.
For the fifth and final bit, '1', we introduce a phase shift of 180 degrees to the carrier signal for two full cycles.
To demodulate the PSK signal, we compare the received signal with a reference carrier signal. By analyzing the phase difference between the received signal and the reference signal, we can determine the transmitted data sequence.
Learn more about: PSK modulation and demodulation
brainly.com/question/33179281
#SPJ11
Related Questions
When code is compiled it
A) is read directly from the program.
B)is made into a smaller version.
C) runs slower.
D) is converted into binary code.
Answers
Answer:
A compiler takes the program code (source code) and converts the source code to a machine language module (called an object file). Another specialized program, called a linker, combines this object file with other previously compiled object files (in particular run-time modules) to create an executable file. In short, it's A or D.
Answer:
D - is coverted to binary code
Explanation:
A compiler takes the program code (source code) and converts the source code to a machine language module (called an object file). Another specialized program, called a linker, combines this object file with other previously compiled object files (in particular run-time modules) to create an executable file.
Which IT domain in a typical IT infrastructure typically includes routers, circuits, switches, firewalls, and equivalent gear at remote locations? Group of answer choices LAN Domain LAN-to-WAN Domain WAN Domain System/Application Domain
Answers
The WAN (Wide Area Network) domain in a typical IT infrastructure typically includes routers, circuits, switches, firewalls, and equivalent gear at remote locations.
The WAN domain is responsible for the interconnection of remote sites and users over a geographically dispersed area, making it a crucial component of any enterprise network.The WAN domain is responsible for providing the connectivity between remote sites, the Internet, and other business partners' networks.
WAN services are usually provided by ISPs (Internet Service Providers) or telecom carriers. The WAN domain is a complex infrastructure, and it is often managed by a specialized team of network engineers.The LAN (Local Area Network) domain is the part of the IT infrastructure that connects devices in a single building or campus.
It typically includes switches, wireless access points, and other network devices. The LAN-to-WAN domain is responsible for providing connectivity between the LAN and the WAN domains.The System/Application domain is the part of the IT infrastructure that includes servers, storage systems, and applications. It is responsible for the delivery of IT services to end-users. The System/Application domain is not directly responsible for network connectivity, although it may have an impact on the performance and availability of network services.In conclusion, WAN Domain in a typical IT infrastructure typically includes routers, circuits, switches, firewalls, and equivalent gear at remote locations.
So, the WAN (Wide Area Network) domain in a typical IT infrastructure typically includes routers, circuits, switches, firewalls, and equivalent gear at remote locations.
Learn more about WAN here,
https://brainly.com/question/31252892
#SPJ11
1.
gear ratio:
gear ratio
2.
input:
input
3.
inverse:
inverse
4.
mechanism:
mechanism
5.
output:
output
6.
simple gear train:
simple gear train
7.
torque:
torque
Column B
a.a combination of two or more gears used to transmit motion between two rotating shafts or between a shaft and a slide
b.information fed into a system
c.the information produced by a computer or a system
d.the ratio of the speed of the driving member of a gear train to that of the driven member
e.opposite in position, direction, order, or effect
f.twisting force
g.the part of a machine which contains two or more pieces arranged so that the motion of one compels the motion of the others PLZ HELP WILL GIVE BRAINLIST
Answers
Answer:
1- D
2-B
3- E
4- G
5-C
6-A
7-F
Explanation:
I am not completely sure if this is right but I think most answers are right
multiple choice: we have been assigned the task of selecting an interface language for a device controller. two proposals have been made. method c uses c while method r uses regular expressions. based on your knowledge of cse 355, a primary benefit of method c over method r is group of answer choices method c always terminates in fewer computation steps than method r on the same input. there is an algorithm to analyze method c to detect infinite loops, but no algorithm for method r. method c can compute everything that method r can, and more. method c can be represented as a finite automaton while method r cannot.
Answers
Write a program that will input a list of test scores in from the keyboard. When the user enters -1, print the average.
What do you need to be careful about when using -1 to stop a loop?
Enter the Scores:
45
100
-1
The average is: 72.5
Answers
print("Enter the Scores:")
total = []
while True:
num = int(input())
if num == -1:
break
total.append(num)
print("The average is:",(sum(total)/len(total)))
I wrote my code in python 3.8. Also, you have to be careful about adding -1 to the total. You don't want to count -1 in the average.
When developing an output control system, it is important to implement output standards that: (Choose all that apply.)
Answers
When creating an output control system, it is important to implement output standards or targets that managers think will have good measure efficiency, quality, etc.
What is this system about?In an output control system, it is important for managers to first make sure that they set of goals or output performance standards or targets that they believe will best measure in terms of efficiency, quality, etc., for their firm.
Note that this system often acts as a behavior control systems that helps in providing methods that can be used to ensure that workers do well in ways that make the work to be efficient.
Learn more about control system from
https://brainly.com/question/27334060
Write down the 8th (start from the left hand side) digit and the LAST digit of your student ID as A1 and A0 respectively. Make these two digits into a new number N that has double digits. For example, a student’s student ID is 2012521460204，then the decimal N=44. Then, answer the following SIX questions.
(a) Suppose N is a decimal number, convert (N)10 to its equivalent binary.
(b) Suppose N is a hexdecimal number, convert (N)16 to its equivalent binary.
Answers
Given that, A1 is the 8th digit from the left-hand side and A0 is the last digit of the student ID.So, the student ID is 201526204, then A1 = 5 and A0 = 4 (A) Binary of (N)10 = (110110)2, (B) Binary of (N)16 = (1010100)2.
(A) The given student ID is 201526204
Here, A1 = 5 and A0 = 4N = 54
Binary of (N)10 = (110110)2
Let's write the given number 54 in the powers of 2.64 32 16 8 4 2 1 1 1 0 1 1 0 1 0
So, (N)10 = (110110)2
Binary of (N)16 = (1010100)2
(B) The hexadecimal number is given by 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F where A represents 10, B represents 11, C represents 12, D represents 13, E represents 14 and F represents 15.
To convert any hexadecimal to binary, we just need to replace each hexadecimal digit with its corresponding 4-digit binary number.
Hence, the hexadecimal number
(N)16 = 54(decimal) = 36(hexadecimal).
So, (N)16 = (00110110)2 = (1010100)2.
To know more about binary number refer for :
https://brainly.com/question/33282516
#SPJ11
What is the result when you run the following line of code after a prompt? >>> print "Good job"
Answers
Answer:
You will get line "Good job" itself
HELP FAST PLS
Do you care more about avoiding fees/costs, accumulating perks, convenience, etc?
Answers
Answer: Convenience
Explanation:
good job
Explanation:
i just need points but i need the answer too
Which network device sends data to every device that is connected to it?.
Answers
Answer:
Router
Explanation:
A router is a more complex device that usually includes the capability of hubs, bridges and switches. A hub broadcasts data to all devices on a network. This can use a lot of bandwidth as it results in unnecessary data being sent - not all computers might need to receive the data.
In the previous activity the learner developed an idea for a game, this included the game plot, storyline, characters, interaction, and so on. In this activity, the learner should adapt the game concept and create a game to run on a mobile platform. Create a game for smartphones featuring the characters you created in the previous activity. You may visit video game websites and research online to find out how creating games for smartphones differs from creating games for other platforms. Specify for which mobile operating system you will create the game and give reasons for your choice. Your response should include the following points:
NEED HELP ASAP! Game development question.
State the basic game concept, the game genre, and game rules and objectives.
Explain how you will adapt the game for the smartphone: include descriptions of the smartphone’s features and restrictions and how they will enhance or hamper the playing experience.
Describe the pros and cons of developing games for various mobile platforms, including your choice of platform.
Answers
Answer:
I hope this helps, this is my first time doing an answer in Brainly.
Explanation:
The game concept will be this, your character, being a green lizard, will jump from platform to platform. Constantly scrolling up with the character, but if you fall behind, it's game over.
If I know anything about smartphones is the the screens are usually tiny, and are very hard to play on. So I will impliment motion controls. If you tilt the screen in the direction you want the lizard to go, it will follow that tilt.
The pros is that it's a lot more easy when developing the game, the cons is that the games are usually super small.
Using the drop-down menu, complete these sentences to describe algorithms. Algorithms are instructions to solve a problem. Algorithms are when written in a programming language. Algorithms are step-by-step instructions for or to follow to solve a problem. Programmers use algorithms to and .
Answers
Answer:
Algorithms are instructions to solve a problem
Explanation:
Answer:
1. step by step
2. computer programs
3. a person
4. a computer
5. solve logic problems
6. start writing new programs
Explanation:
i just did it and got them all right
Conduct online research on the document object model. Study about the objects that constitute the DOM. In addition, read about some of the properties and methods of these objects and the purposes they serve. Based on your online research on DOM and its objects, describe DOM in detail.
Answers
The Document Object Model (DOM) is a programming interface for HTML and XML documents. It represents the structure of a document as a hierarchical tree of objects, where each object represents an element, attribute, or piece of text within the document.
The objects that constitute the DOM include:
Document: Represents the entire HTML or XML document. It serves as an entry point to access other elements and nodes within the document.
Element: Represents an HTML or XML element, such as <div>, <p>, or <span>. Elements can have attributes, child elements, and text content.
Attribute: Represents a specific attribute of an HTML or XML element. Attributes provide additional information about elements, such as the id, class, or src attributes.
Text: Represents the text content within an element. Text nodes contain the actual textual content that is displayed within the document.
NodeList: Represents a collection of nodes, usually returned by methods such as getElementByTagName(). It allows access to multiple nodes at once.
Event: Represents an event triggered by user interaction or other actions. Events can include mouse clicks, keyboard input, or element-specific events like onload or onchange.
The DOM objects provide various properties and methods to interact with the document. Some commonly used properties include:
innerHTML: Gets or sets the HTML content within an element.
className: Gets or sets the class attribute value of an element.
parentNode: Retrieves the parent node of an element.
childNodes: Retrieves a collection of child nodes of an element.
By utilizing the DOM and its objects, developers can dynamically modify the content, style, and behavior of web pages. It provides a powerful and standardized way to interact with and manipulate web documents programmatically.
For more questions on Document
https://brainly.com/question/30563602
#SPJ11
Conditional statements are useful to computer programmers because
A) they eliminate extra coding by reuse of materials.
B) they allow programmers to set conditions to be met for an action to take place.
C) they use shorthand symbols to represent quantities.
D) they are predefined for each programming language.
Answers
Answer:
Option B is correct.
Explanation:
Let look at each statement
A) No, Conditional statement do not eliminate extra code by reuse.
B) Yes, it allow programmers to set conditions to be met for an action to take place. so this option is correct.
C) No, shorthand symbols are not used to represent quantities.
D) No, They are not Predefined for each programming Language.
Answer:
the answer is B, The Second Opinion
Explanation:
the Conditional Statement or in other words the if Statement is used in a code to set conditions so when the need of the function is met true, then the code can execute the function.
Describing How to Create a Combination Chart
Select the correct navigational path to create a combination chart
Select the chart
Click the Chart Tools
tab
Select the data series from the Chart Area list.
Click the Chart Tools
tab
Click Change Chant Type.
Choose a chart type for the selected data series and click OK.
Answers
Answer:
format and design
Explanation:
i took test
Will an Intel Xeon CPU X5690 with 3.47 GHz and 6 cores with 12 logical processors and 12 mb cache able to handle an NVIDIA RTX 3050 graphics card?
Answers
Yes, an Intel Xeon CPU X5690 with 3.47 GHz and 6 cores with 12 logical processors and 12 mb cache can be able to handle an NVIDIA RTX 3050 graphics card.
Why can it be handle an NVIDIA RTX 3050 graphics card?The year 2011 saw the arrival of a high-end server CPU with 6 cores and 12 threads. with a 130W power rating, 3.73GHz base clock, and 3.73GHz maximum speed. The Xeon X5690 is a member of the Xeon series and is based on the 32nm Westmere-EP family that bottlenect that of the NVIDIA RTX 3050 graphics card.
The Nvidia RTX 3050 is a graphics card containing second-generation RT Cores and third-generation Tensor Cores built on Nvidia's most recent 30-Series Ampere architecture.
Therefore, When it comes to ray tracing capabilities, the 3050 is more effective than Nvidia's prior generation of GPUs. In fact, the RTX 3050 is one of the least expensive graphics cards that supports ray tracing.
Learn more about Intel processor from
https://brainly.com/question/6453846
#SPJ1
Answer:
Yes, it should be.
Look out for users with this photo.
Answers
Answer:
why whats wrong with it
Explanation:
An employee sets up Apache HTTP Server. He types 127.0.0.1 in the browser to check that the content is there. What is the next step in the setup process?
Answers
Answer:
Set up DNS so the server can be accessed through the Internet
Explanation:
If an employee establishes the HTTP server for Apache. In the browser, he types 127.0.0.1 to verify whether the content is visible or not
So by considering this, the next step in the setup process is to establish the DNS as after that, employees will need to provide the server name to the IP address, i.e. where the server exists on the internet. In addition, to do so, the server name must be in DNS.
Hence, the first option is correct
Your question is lacking the necessary answer options, so I will be adding them here:
A. Set up DNS so the server can be accessed through the Internet.
B. Install CUPS.
C. Assign a static IP address.
D. Nothing. The web server is good to go.
So, given your question, what is the next step in the setup process when setting up an Apache HTTP Server, the best option to answer it would be: A. Set up DNS so the server can be accessed through the Internet.
A server can be defined as a specialized computer system that is designed and configured to provide specific services for its end users (clients) on a request basis. A typical example of a server is a web server.
A web server is a type of computer that run websites and distribute web pages as they are being requested over the Internet by end users (clients).
Basically, when an end user (client) request for a website by adding or typing the uniform resource locator (URL) on the address bar of a web browser; a request is sent to the Internet to view the corresponding web pages (website) associated with that particular address (domain name).
An Apache HTTP Server is a freely-available and open source web server software designed and developed to avail end users the ability to deploy their websites on the world wide web (WWW) or Internet.
In this scenario, an employee sets up an Apache HTTP Server and types 127.0.0.1 in the web browser to check that the content is there. Thus, the next step in the setup process would be to set up a domain name system (DNS) so the server can be accessed by its users through the Internet.
In conclusion, the employee should set up a domain name system (DNS) in order to make the Apache HTTP Server accessible to end users through the Internet.
Find more information here: https://brainly.com/question/19341088
Decrypt this secret message if your able to a lot will come..
Answers
dNch/dy=8000
Failure
Failure
Failure
The Decrypt message is
dNch/dy=8000FAILUREFAILUREFAILURETo decrypt / decipher an encoded message, it is necessary to know the encryption used (or the encoding method, or the implemented cryptographic principle).
To decrypt the given message, consider the mirror image of each value as
First, the message in first line is the mirror image of alphabets as which coded as
dNch / dy = 8000
and, the remaining three lines have same values which is the mirror image of the word "FAILURE".
Learn more about Encryption here:
https://brainly.com/question/30225557
#SPJ4
Write a for loop to print the numbers from 20 to 30, inclusive (this means it should include both the 20 and 30). The output should all be written out on the same line. Expected Output 20 21 22 23 24 25 26 27 28 29 30
Answers
Answer:
for b in range(20,31):
print(b, end=" ")
Explanation:
Hint: Variable does not matter. Meaning the b that I put in does not matter. You can put in any other letter you want. Hope it helps!
A loop to print the numbers from 20 to 30, inclusive for b in range(20,31) : print(b, end=" ").
What is loop?Loop is defined as a computer program or script that continuously executes the same commands or processing the same data until told to stop. A loop is used in computer programming to perform a set of instructions or a block of code repeatedly without having to start from scratch each time. The code block is executed in accordance with a particular situation. Loops are the control structures in a program.
Variables are data values that can change depending on the user's response to a query, such as their age. During the running of a program, variables could change. A variable is a piece of memory. It has a name that's connected to that place. The memory location is where data is stored. Variable is irrelevant. In other words, it doesn't matter what b I enter. Any additional letter can be entered.
Thus, a loop to print the numbers from 20 to 30, inclusive for b in range(20,31) : print(b, end=" ").
To learn more about loop, refer to the link below:
https://brainly.com/question/14390367
#SPJ3
What is wind chill?
question 2 options:
when the wind is chilly
when the air feels colder to living things than it actually is
when the wind is stronger because of the cold temperature
when the wind calms down because of the cold temperatures
Answers
Wind chill refers to the phenomenon when the air feels colder to living things than it actually is.
Wind chill is not directly related to the strength or calmness of the wind. Instead, it is a measure of how the combination of cold air temperature and wind speed affects the perceived temperature on exposed skin.
When there is a strong wind blowing, it can increase the rate of heat loss from the body, making the air feel colder than the actual temperature.
For example, if the air temperature is 0°C (32°F) and there is a strong wind blowing, the wind chill factor may make it feel like -10°C (14°F) on exposed skin. The wind chill factor takes into account the cooling effect of wind on the human body and provides a more accurate representation of how the temperature feels to individuals.
Learn more about wind chill here:
https://brainly.com/question/30390286
#SPJ11
Conceptual note-taking is the act of writing down information in the order it is given. drawing attention to details with a marker or pen. adding main ideas and details to a graphic organizer. creating lists to organize homework and study time.
Answers
Answer:A
Explanation:Conceptual notetaking is the act of writing down information in the order it is given.
Conceptual note-taking is class of note-taking characterized with writing down in order, drawing of attention to details with a pen and adding of main ideas.
Conceptual note-taking is most useful when we need to show how the main ideas and details relate to each other.
Therefore, in short, the Conceptual note-taking basically focus on the concepts of the lecture, classwork etc
Learn more about this here
brainly.com/question/7321210
Write an anonymous PL/SQL program to print out review decision and comments for round 1 review of paper titled 'Comparing big data systems'. In the same program, please also print out an automatic suggestion for this paper. The suggestion should be 'reject' if at least two reviewers' decisions are reject. The suggestion should be 'accept' if all reviewers' decisions are accept. All other cases the suggestion is 'to be decided by editor'
Answers
Here's an anonymous PL/SQL program that prints out the review decision and comments for round 1 review of the paper titled 'Comparing big data systems', along with an automatic suggestion based on the reviewers' decisions:
DECLARE
-- Variables for decision and comments
decision1 VARCHAR2(20);
comments1 VARCHAR2(500);
decision2 VARCHAR2(20);
comments2 VARCHAR2(500);
decision3 VARCHAR2(20);
comments3 VARCHAR2(500);
-- Automatic suggestion
suggestion VARCHAR2(50);
BEGIN
-- Assign the decision and comments for each reviewer
decision1 := 'accept';
comments1 := 'The paper provides a comprehensive comparison of big data systems.';
decision2 := 'reject';
comments2 := 'The experimental methodology is not well-defined, and the results are inconclusive.'
decision3 := 'accept';
comments3 := 'The paper's analysis of scalability is impressive, and the conclusions are well-supported.'
-- Print out the decision and comments for each reviewer
DBMS_OUTPUT.PUT_LINE('Reviewer 1 Decision: ' || decision1);
DBMS_OUTPUT.PUT_LINE('Reviewer 1 Comments: ' || comments1);
DBMS_OUTPUT.PUT_LINE('');
DBMS_OUTPUT.PUT_LINE('Reviewer 2 Decision: ' || decision2);
DBMS_OUTPUT.PUT_LINE('Reviewer 2 Comments: ' || comments2);
DBMS_OUTPUT.PUT_LINE('');
DBMS_OUTPUT.PUT_LINE('Reviewer 3 Decision: ' || decision3);
DBMS_OUTPUT.PUT_LINE('Reviewer 3 Comments: ' || comments3);
DBMS_OUTPUT.PUT_LINE('');
-- Determine the automatic suggestion based on reviewers' decisions
IF decision1 = 'reject' AND decision2 = 'reject' THEN
suggestion := 'reject';
ELSIF decision1 = 'accept' AND decision2 = 'accept' AND decision3 = 'accept' THEN
suggestion := 'accept';
ELSE
suggestion := 'to be decided by editor';
END IF;
-- Print the automatic suggestion
DBMS_OUTPUT.PUT_LINE('Automatic Suggestion: ' || suggestion);
END;
/
Please note that this program assumes three reviewers' decisions and comments are already available. You can modify the values of decision1, decision2, decision3, comments1, comments2, and comments3 to reflect the actual decisions and comments for the paper's round 1 review.
To know more about SQL click the link below:
brainly.com/question/
#SPJ11
Marcus White has just been promoted to a manager. To give him access to the files that he needs, you make his user account a member of the Managers group, which has access to a special shared folder. Later that afternoon, Marcus tells you that he is still unable to access the files reserved for the Managers group. What should you do
Answers
Answer:
log off of his account and log back in
Explanation:
The first thing that Marcus should do would be to log off of his account and log back in. This is so that the new changes to his permissions can take effect. This should solve his problem and grant him access to all the permissions available in the Managers Group. If this does not work, then it is most likely that he is still in the previous group which has the Manager level permissions blocked. In this case he would need to leave the previous group that he is in because the blocking permissions overrides the access allowed from the Managers group.
for what work photoshop is used?
Answers
What does it mean for the routing system to be “redundant”? Is redundancy a good or bad thing ?
Answers
Redundancy in a routing system means that there are multiple paths for data to travel between two points. Redundancy is generally considered a good thing, as it increases the reliability, fault tolerance, and overall stability of the network.
In networking, redundancy refers to the availability of multiple paths for data to flow between two points. In a routing system, redundancy means having backup routes or alternative paths that can be used in case the primary path fails or becomes unavailable. Redundancy can be achieved through various techniques such as load balancing, link aggregation, or the use of multiple routing protocols.
Redundancy is generally considered a good thing in routing systems as it enhances network availability, resilience, and fault tolerance. By having multiple paths, a network can continue to function even if one path fails or experiences congestion. This reduces the risk of network downtime, which can have significant financial and operational consequences.
However, redundancy can also have some downsides. It can increase network complexity, cost, and management overheads. It can also create performance issues if not implemented properly, such as causing data packets to take longer to reach their destination due to unnecessary hops or delays. Therefore, it is important to strike a balance between redundancy and efficiency to ensure that the network meets its performance requirements while maintaining high availability.
Overall, redundancy is a necessary and valuable feature in routing systems, particularly in mission-critical applications where network downtime is not an option. Properly designed redundant routing systems can provide a reliable, resilient, and robust network infrastructure that can withstand failures and maintain continuity of operations.
Know more about Redundancy here :
https://brainly.com/question/13266841
#SPJ11
2.3 pseudocode exercise on edhesive
Answers
Answer:
a=int(input("Enter a numerator: "))
b=int(input("Enter a divisor: "))
quotient=a/b
remainder=a%b
print("Quotient is: " + str(int(quotient)))
print("Remainder is: " + str(int(remainder)))
That's 2.3 question 1
a_ft = int(input("Enter the Feet: "))
a_inc = int(input("Enter the Inches: "))
b_ft = int(input("Enter the Feet: "))
b_inc = int(input("Enter the Inches: "))
sum_inc = a_inc + b_inc
# select the whole and the fractional part
inc_to_ft = sum_inc // 12
rem_from_div = sum_inc % 12
sum_ft = a_ft + b_ft + inc_to_ft
print("Feet: {} Inches: {}".format(sum_ft, rem_from_div))
That's 2.3 question 2
Explanation:
I wasn't sure which one you needed so I added both.
In a mental status exam, the clinician evaluates a client's ________ by observing how well the client speaks and looking for indications of memory or attention difficulties.
Answers
In a mental status exam, the clinician evaluates a client's intellectual functioning by observing how well the client speaks and looking for indications of memory or attention difficulties.
What is Psychology?
This refers to the study of the mind in order to discover the hidden motivations of a person and how it affects interaction.
Hence, we can see that In a mental status exam, the clinician evaluates a client's intellectual functioning by observing how well the client speaks and looking for indications of memory or attention difficulties.
Therefore, the primary thing that is being searched and evaluated in a mental status exam is a client's intellectual functioning
Read more about psychology here:
https://brainly.com/question/12011520
#SPJ1
web design, pls help me i need this in 40 minutes
Answers
<input type="color">: This input type allows the user to select a colour using a colour picker. , This input type, "date," enables users to choose a date from a calendar.
Which seven different text structures are there?A few examples of text structures are sequence/process, description, time order/chronology, proposition/support, compare/contrast, problem/solution, cause/effect, inductive/deductive, and research.
How should a date be formatted?Here is a general rule to remember when writing dates with commas: in the month-day-year format (used in the United States), use commas after the day and year. Do not use any commas when using the day-month-year format, which is used in the UK and other nations. In 2007, on May 13, Daniel was born.
To know more about input type visit:-
https://brainly.com/question/14543408
#SPJ1
You are interested in receiving more information about a special topic, including emails, announcements and advertising. What can you do? Group of answer choices Bookmark Websites about the topic on your favorite browser. Join a newsgroup about the topic. Subscribe to a listserve group about the topic. Set your browser's home page to a topical Website.
Answers
Answer:
The answer is "Subscribe to a listserve group about the topic".
Explanation:
A Listserv would be a software suite that is used to run a discussion list through community e-mail. Even so, LISTSERV is indeed a trademark of L-Soft Global who created some of the first and most famous mailing list programs.
It is a way to communicate by e-mail to a community of people. They send an e-mail to "reflecting" and the software gives an e-mail to all subscribers of both the Group.